Simons
Twisted-Cord Crossbody Phone Strap
Made of braided rope and metal hardware, this crossbody phone strap uses a stretch twisted-cord design. A plastic card slips between your phone and case to secure the main snap hook, while two secondary snap hooks allow quick strap removal. It fits most phone cases and is 25 inches (63.5 cm) long.
- Style
- casual
- Category
- Electronics > Electronics Accessories
Color
Size
Specifications
Crossbody phone strap with stretch twisted cords and snap hooks, fits most phone cases.
Stretch twisted cords; plastic card to insert between phone and case; two secondary snap hooks for easy removal; fits most phone cases.
- Material
- Braided rope, metal
- Style
- casual
- Gender
- female
- Age Group
- adult
- Condition
- new
- Category
- Electronics > Electronics Accessories
Additional Attributes
- stretch twisted cords
- plastic card insert
- two secondary snap hooks
- fits most phone cases
- length: 25 in (63.5 cm)
Product Insights
The Twisted-Cord Crossbody Phone Strap offers a residue-free, friction-based card anchor that secures behind a snug-fitting phone case, letting the strap detach via snap hooks while the anchor stays. Its fixed 63.5 cm length comfortably fits 5'0–5'8 wearers, and the twisted-cord weave stretches slightly to absorb shock for typical 200g phones, though heavier phones reduce comfort. The main tradeoff: the plastic anchor requires a tight case fit to hold reliably.
Verified claims
- Retention
- Card anchor holds under tension only if case fits snugly.
- Installation method
- No adhesive: anchor card secures by case pressure only.
- Detachability
- Strap detaches from card without removing card from case.
- Detach mechanism
- Snap hooks detach strap while anchor card stays.
- Anchor design
- Plastic card anchor holds by friction, leaves no residue, but may slip in loose cases.
- Weight capacity
- Cord's give absorbs shock for typical ~200g phones; heavier phones reduce comfort.
- Length fit
- Fixed 63.5 cm strap, with limited stretch, comfortably fits 5'0–5'8 wearers.
- Attachment stability
- Friction-based card anchor stays put; secondary hooks let you detach strap without disturbing it.
- Height range
- Fixed 63.5 cm strap fits heights 5'0–5'8; non-adjustable.
- Case fit
- Card anchor requires a snug phone case for secure grip.
- Residue-free
- Card anchor uses pressure, not adhesive, leaving no residue.
- Strap removal
- Two snap hooks let you detach the strap while the card stays in place.
- Weight limit
- No official weight limit; cord stretch works for 200g phones.
- Attachment durability
- Friction anchor holds by case pressure; detachable strap reduces wear.
- Attachment design
- Friction card anchor leaves no residue and strap detaches without removing card
- Colorway look
- Pink variant is two-tone pink and green braid, not solid.
- Hardware variation
- Pink variant images show two hardware finishes and an ID tag not listed.
- Stretch
- Twisted-cord weave stretches slightly, absorbing phone weight, no bounce.
Product record
- Title
- Twisted-Cord Crossbody Phone Strap
- Brand
- Simons
- Price
- 29 CAD
- Availability
- In stock
Image Analysis
3 images- 01
Product
Close-up of a twisted two-tone cord crossbody phone strap attached to a phone case via silver metal hardware; two braided cord sections and connecting rings are visible.
- Attachment hardwareShiny silver metal clasp and two interlocking split rings connecting the strap to a phone case; clasp has a spring-loaded gate and one ring passes through the other.
1 region
x 0.52 · y 0.24 · w 0.28 · h 0.26 (high) - Braided cord constructionTwo braided cords made from woven synthetic rope, each cord showing a regular three-strand twist pattern with alternating pink and green strands.
2 regions
x 0.08 · y 0.45 · w 0.45 · h 0.48 (medium); x 0.43 · y 0.43 · w 0.35 · h 0.48 (medium) - Cord terminationsEach braided cord end is wrapped with additional cord in a tight coil near the rings, forming a thicker wrapped termination.
2 regions
x 0.40 · y 0.36 · w 0.22 · h 0.20 (high); x 0.27 · y 0.46 · w 0.18 · h 0.18 (medium) - Phone and clear casePartial view of a phone in a transparent clear case showing a black screen and rounded corner, with the case's lower edge and attachment point visible.
1 region
x 0.55 · y 0.00 · w 0.45 · h 0.33 (high)
Other
Studio product shot on a light neutral background with overhead diffuse lighting; slight soft shadow under cords and crisp focus on hardware and braid.
- Background and lightingEven light gray neutral background with soft, diffuse lighting producing minimal shadows beneath the cords.
- Shot compositionDiagonal composition with cords running from upper right toward lower left; phone cropped at top-right corner of the frame.
- Image qualitySharp focus on metal hardware and braided texture; no visible text or labels on the visible phone screen or case.
Colors
bright pink· pink braid strandsvivid green· green braid strandspolished silver· metal hardware#C3C4C3- Attachment hardwareShiny silver metal clasp and two interlocking split rings connecting the strap to a phone case; clasp has a spring-loaded gate and one ring passes through the other.
- 02
Product
A braided twisted-cord crossbody phone strap made from two-tone green and pink cords, terminating in gold-tone metal rings and a heart-shaped clip with a clear rectangular plastic ID holder attached.
- Braided cord constructionTwo parallel braided ropes formed from alternating bright pink and vivid green synthetic cords, each braid showing a three-strand twist pattern and a slightly glossy, woven texture.
1 region
x 0.14 · y 0.02 · w 0.72 · h 0.60 (high) - Cord termination wrapEnds of the braids are secured with tight wraps of the same pink and green cord material creating short bound sections before the metal hardware.
1 region
x 0.52 · y 0.62 · w 0.24 · h 0.12 (high) - Metal hardwareGold-tone metal hardware consisting of two interlinked oval rings and a decorative heart-shaped clip below them; metal has a polished reflective finish.
1 region
x 0.40 · y 0.68 · w 0.22 · h 0.18 (high) - Clear plastic ID holderRectangular translucent white plastic card holder with a single slot at the top where it is attached to the heart clip; holder shows subtle glare and rounded corners.
1 region
x 0.04 · y 0.80 · w 0.22 · h 0.18 (high)
Other
Product shot on a uniform light gray background with soft shadowing; image is top-down with the strap looped and hardware positioned toward the lower center-left.
- Shot compositionTop-down product photograph showing the strap arranged in a loose loop occupying most of the frame, hardware and ID holder placed near the lower left quadrant.
- Background and lightingEven, neutral light gray background with soft diffuse lighting and slight cast shadows beneath the braided cord and hardware indicating light from above.
- Image qualityHigh-resolution image with clear detail and minimal noise; edges of cords and metal reflectivity are sharp and well defined.
Colors
bright pink· pink cordvivid green· green cordgold-tone metal· metal hardware#B3B4B4translucent white· ID holder#F2F2F3- Braided cord constructionTwo parallel braided ropes formed from alternating bright pink and vivid green synthetic cords, each braid showing a three-strand twist pattern and a slightly glossy, woven texture.
- 03
Product
Close-up of a braided twisted cord crossbody strap in alternating bright pink and green cords with gold-tone metal hardware including rings and a heart-shaped clasp, and a clear rectangular plastic tag attached by a small metal ring.
- Braided twisted cordThick braided cord composed of two distinct strands twisted together in an alternating pattern of bright pink and green, with a smooth, slightly glossy synthetic-fiber texture.
2 regions
x 0.61 · y 0.00 · w 0.36 · h 0.46 (high); x 0.63 · y 0.34 · w 0.30 · h 0.40 (high) - Gold-tone metal rings and linksCluster of interlocking gold-tone metal rings and small chain links connecting the braided cord to the clasp; rings are smooth and reflective with rounded cross-sections.
1 region
x 0.49 · y 0.28 · w 0.20 · h 0.18 (high) - Heart-shaped claspHollow heart-shaped gold-tone clasp with a hinged opening mechanism, shiny polished finish and visible hinge pin, attached to the rings and holding the clear tag via a small ring.
1 region
x 0.45 · y 0.36 · w 0.18 · h 0.20 (high) - Clear rectangular plastic tagTransparent flexible rectangular plastic tag with a small rectangular tab and punched hole used for attachment; tag surface shows specular highlights and slight creases or reflections.
1 region
x 0.04 · y 0.59 · w 0.47 · h 0.39 (high) - Small attachment ringSmall circular metal ring links the plastic tag to the heart-shaped clasp; ring is reflective and gold-tone matching the other hardware.
1 region
x 0.38 · y 0.48 · w 0.06 · h 0.06 (medium)
Other
Studio-style close-up on a neutral light gray background with soft shadows; image is cropped so cords extend out of frame at top and right.
- Background and stagingEvenly lit light gray background with subtle soft shadow beneath the hardware and tag, indicating directional overhead lighting.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Framing and cropClose-up composition with the braided cords entering from the top-right edge and the plastic tag occupying the lower-left quadrant; top and right cord sections are cropped by the image edge.
- Image qualitySharp focus on hardware and braiding with visible fine texture and clear specular highlights; minimal noise.
Colors
bright pink· braided cord - pink strandvivid green· braided cord - green strandgold-tone metallic· metal hardware#C3BBA3transparent clear· plastic tag- Braided twisted cordThick braided cord composed of two distinct strands twisted together in an alternating pattern of bright pink and green, with a smooth, slightly glossy synthetic-fiber texture.