Manon Plush Trim Suede Gloves

Verified claims

Canadian heritage

A Simons collaboration designed and tested in Quebec's freeze-thaw cycles.

Construction

Single-piece suede and internal seams improve warmth and durability.

Cuff

Polyester sherpa cuff and ultra-soft plush edging for casual winter style.

Thermal efficiency

Continuous suede palm reduces cold-air infiltration for improved warmth.

Warmth

Single-piece suede shell blocks wind; polyester lining; 65% olefin/35% polyester fill with Thinsulate C40; rated for 0-10°C.

Water sensitivity

Suede exterior is damaged by moisture; not suitable for rain or heavy snow.

Water resistance

Polyester sherpa cuff absorbs less than 0.4% water, stays light and dries fast; spot clean only.

Fit

Short, curly matte pile gives a casual après-ski character and slides under coat sleeves.

Sizing

Auclair gloves run small; pick the larger size if between sizes.

Weather limits

Avoid rain and snow; wear in dry cold from 0°C to 10°C.

Care

Dry maintenance: brush, eraser, spot-clean trim.

Touchscreen

Not touchscreen-compatible; remove to use phone.

Trim profile

Polyester sherpa trim is low-profile and slides under coat sleeves.

Product record

Title

Manon Plush Trim Suede Gloves

Brand

Auclair

Price

50 CAD

Availability

In stock

Polyester sherpa cuff characteristics

• Polyester absorbs less than 0.4% of its weight in water, while wool can hold 30%; the sherpa cuff therefore stays light and dries quickly if it gets damp, avoiding the cold, saturated feel that natural fibers develop in wet snow.
• The 'ultra soft plush edging' is a polyester sherpa cuff — a 100% synthetic pile fabric engineered to replicate sheep's wool, giving the glove a cozy, nubby texture and insulating collar without the weight or maintenance of genuine shearling.
• Unlike long-pile acrylic faux fur used on dress gloves, polyester sherpa has a short, curly, matte pile that reads as rugged and outdoorsy — this texture gives the Manon its après-ski, heritage-winter character rather than a high-fashion evening look.

How these compare to similar suede gloves

• The ultra-soft plush edging gives the cuff a fine, low-profile finish that slides easily under coat sleeves and avoids the bulky look of sherpa or rib-knit cuffs, so the glove reads more 'polished leather accessory' than 'outdoor gear'.
• Auclair, a Quebec-based brand, co-created the Manon with Simons, a Canadian department store that champions local designers—the 'Canadian design at Simons' tag signals a regional, heritage-flavored fashion piece that stands apart from generic imported gloves at the same price.
• Cut from a single piece of genuine suede, the Manon has no seams crossing the palm or fingers; this eliminates internal friction points and creates a smoother, more form-fitting feel than multi-panel gloves, a traditional glove-making detail that elevates it above many entry-level suede styles.

Canadian manufacturing heritage

• All Auclair gloves, including the Manon, are designed and developed at the brand’s global headquarters in Montreal, Quebec, where pattern makers and material specialists leverage the city’s severe freeze-thaw cycles as a real-world proving ground for fit and weather resistance.
• Auclair’s Quebec home subjects gloves to dry cold, wet maritime snow, and freeze-thaw cycles that are more punishing than steady alpine cold, so the Manon’s insulation and suede are inherently tuned for variable, often damp, urban winter conditions — the glove is stitched with the same accumulated knowledge that kept ski patrollers and snowmobilers functioning through Canadian winters for decades.

Single-piece suede construction and quality

• The Manon glove’s body is cut from a single uninterrupted piece of suede, eliminating palm-side seams that would otherwise create friction points against the hand and concentrate stress where the material is weakest — for split suede, which is inherently less dense than full-grain leather, this reduces the chance that the glove will tear along a stitch line over time.
• Auclair complements the single-piece cut with internal seam construction, a technique where the leather edges are sewn together and then turned inward, so that all stitching is concealed inside the glove — for suede, this not only achieves a smooth external profile but also protects the thread and seam allowance from moisture absorption and surface abrasion, two common causes of premature failure in suede accessories.
• Without seams crossing the palm, the glove’s most exposed face presents a continuous suede expanse that traps more still air inside the lining than a multi-panel design; combined with the Thinsulate C40 and polyester fill, the single-piece shell reduces cold-air infiltration through needle holes, subtly improving the glove’s ability to hold heat in brisk, dry conditions.