Bede Tall Rain Boots

Tall rain boots with vulcanized rubber construction, tartan lining, and adjustable buckle strap.

Vulcanized rubber upper, tartan fabric lining, adjustable strap with antique-finish buckle, foam footbed, embossed non-skid rubber outsole.

Material

Vulcanized rubber upper, tartan fabric lining, foam footbed with textile cover, vulcanized rubber outer sole

Gender

female

Age Group

adult

Condition

new

Category

Apparel & Accessories > Shoes

01

Product

Right-side view of a single tall black rubber rain boot with a decorative side strap and metal buckle near the top, embossed rim lettering, textured sole with deep tread, and molded heel and toe shaping.

• Overall silhouetteTall knee-height single boot shown in right-side profile with a smoothly tapered cylindrical shaft, defined ankle and instep molding, and a rounded toe box.
  1 region

  x 0.06 · y 0.02 · w 0.85 · h 0.96 (high)
• Material and finishSingle-piece molded rubber or similar synthetic material with a mostly matte finish and subtle fine pebbled texture visible on the lower foot area.
  1 region

  x 0.18 · y 0.46 · w 0.58 · h 0.36 (high)
• Decorative strapHorizontal strap attached to outer upper shaft near the top with an oval-backed patch and a metal buckle; strap is same dark color as shaft and sits flat against the shaft.
  1 region

  x 0.23 · y 0.08 · w 0.38 · h 0.12 (high)
• Buckle hardwareMetal rectangular buckle with pin and a small round metal rivet visible on the strap assembly; buckle finish appears warm metallic (brass-toned).
  2 regions

  x 0.37 · y 0.10 · w 0.06 · h 0.06 (high); x 0.47 · y 0.12 · w 0.03 · h 0.03 (medium)
• Embossed rim textEmbossed text runs around the top rim of the shaft and is raised from the surface.
  1 region

  x 0.17 · y 0.00 · w 0.66 · h 0.07 (medium)
• Embossed rim lettering transcription“BARBOUR & SONS OF SOUTH SHIELDS. ENG.”
  1 region

  x 0.17 · y 0.00 · w 0.66 · h 0.07 (medium)
• Sole and treadThick lugged outsole with deep rectangular and curved tread blocks, raised heel block and a defined welt separating the sole from the upper.
  1 region

  x 0.12 · y 0.75 · w 0.78 · h 0.20 (high)
• Heel constructionLow stacked block heel integrated into the molded sole, slightly squared at the rear.
  1 region

  x 0.10 · y 0.77 · w 0.12 · h 0.12 (high)
• Toe detailRounded toe with a slightly raised seam line at the front edge and a subtle molded toe cap shape.
  1 region

  x 0.72 · y 0.68 · w 0.20 · h 0.18 (high)

Other

Studio product shot on a pale grey seamless background with soft frontal lighting and a faint cast shadow under the sole.

• Background and stagingEven light grey seamless background with no props; boot is centered vertically and shifted slightly left-to-right within the frame.
• Shadow and lightingSoft diffuse lighting from front-left producing a faint soft shadow beneath the sole and minimal specular highlights on curved surfaces.
• Shot compositionFull-boot side profile occupying most of the image height with slight space above the rim and below the sole; image appears high-resolution and in focus.

Colors

matte black· upper shaft#12140Eblack· strap#12130Daged brass· buckle and rivet#4D4D4Bdeep black· outsole and heel#131514

02

Product

Close-up front-facing view of a pair of tall black rubber rain boots cropped at mid-calf showing toes, vamp, lower shaft, and lug soles.

• Overall silhouetteTwo tall boots shown from the front, slightly angled outward with the left boot set a little forward of the right; shafts extend to mid-calf and are cropped at the top of the image.
  1 region

  x 0.03 · y 0.06 · w 0.94 · h 0.88 (high)
• Upper material and finishUpper appears to be molded rubber with a smooth, slightly matte finish and faint textural grain visible on the vamp and shaft.
  1 region

  x 0.12 · y 0.08 · w 0.76 · h 0.75 (high)
• Toe shapeRounded square toe box with a defined seam around the toe cap area on both boots.
  1 region

  x 0.06 · y 0.58 · w 0.88 · h 0.30 (high)
• Sole and treadThick lug sole with pronounced rectangular tread blocks visible at the front and sides; sole has a raised heel section on each boot.
  2 regions

  x 0.04 · y 0.76 · w 0.44 · h 0.18 (high); x 0.52 · y 0.78 · w 0.42 · h 0.16 (high)
• Decorative panel and seam linesSubtle molded panel lines on the vamp rising onto the lower shaft forming a curved seam detail on the front of each boot.
  1 region

  x 0.22 · y 0.28 · w 0.56 · h 0.50 (high)
• Back pull detailSmall vertical pull loop or strap visible at the rear of the left boot near the heel area (seen from front angle), partially visible above the sole.Partial
  1 region

  x 0.36 · y 0.66 · w 0.07 · h 0.10 (medium)

Other

Studio product shot on a light neutral background with soft shadows; image is cropped to show lower legs and feet of the boots.

• Background and lightingEven, diffused studio lighting on a pale neutral background producing soft shadows beneath and to the left of the boots.
• Framing and cropImage is cropped mid-calf so tops of the boot shafts are cut off; both boots are fully within the frame at the bottom.
• Image qualitySharp focus on boot surfaces and soles with no visible text or labels; slight specular highlights on rounded areas.

Colors

matte black· upper#1D1D1Bdark black· sole#141414

03

Product

Pair of tall, matte black rubber boots shown from the rear; visible center back seams, molded heel blocks, and adjustable calf straps with rectangular metal buckles on the outer sides.

• Overall shapeTwo tall knee-length boots shown from the rear with straight shafts tapering slightly toward the ankle and flared top rims.
  1 region

  x 0.05 · y 0.03 · w 0.90 · h 0.94 (high)
• Material and finishUniform matte rubber surface with a fine slightly pebbled texture across the shafts and foot sections.
  1 region

  x 0.08 · y 0.12 · w 0.84 · h 0.78 (high)
• Center back seamA vertical molded seam runs down the center rear of each boot shaft from top rim to heel area.
  2 regions

  x 0.25 · y 0.06 · w 0.12 · h 0.75 (medium); x 0.63 · y 0.04 · w 0.14 · h 0.80 (medium)
• Top rim bandRaised decorative band around the top rim of each shaft with embossed raised lettering or pattern visible along the band.Partial
  2 regions

  x 0.06 · y 0.01 · w 0.40 · h 0.06 (medium); x 0.54 · y 0.01 · w 0.40 · h 0.06 (medium)
• Calf adjustment strapsEach boot has an outer-side adjustable strap mounted on a round molded patch; the strap on the right boot includes a rectangular metal buckle.
  2 regions

  x 0.06 · y 0.15 · w 0.08 · h 0.07 (high); x 0.72 · y 0.15 · w 0.14 · h 0.08 (high)
• Buckle hardware finishRectangular metal buckle with a warm metallic tone attached to the right-boot strap.
  1 region

  x 0.81 · y 0.16 · w 0.05 · h 0.06 (high)
• Heel and outsoleMolded block heels with a slightly raised platform and visible lugged outsole profile at the rear.
  1 region

  x 0.32 · y 0.78 · w 0.52 · h 0.18 (high)

Other

Studio product shot showing rear view of boots on a neutral light gray background with soft shadows beneath; even frontal studio lighting.

• Viewing angleRear-facing view of the pair of boots, both shafts visible and slightly offset so the outer sides face the camera.
• Background and lightingEven soft studio lighting on a uniform light gray background with subtle soft shadow directly under the boots.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Image qualitySharp focus and high resolution with visible fine texture on the rubber surface; no people or props visible.

Colors

matte black· shaft and foot#1D1D1Bantique brass· buckle hardware#535254