I typically wear a US size 4 or 6. Would the size 38 fit true to size, or should I size up or down given the fitted bottom?

EU size 38 typically corresponds to US 4–6. The fitted bottom means it's intended to be snug, so if you're between sizes, you may prefer the larger end of that range, but we only carry size 38.

What is the recommended care routine for this lambskin leather jacket? Can it be professionally dry cleaned, and how often should it be conditioned to maintain the leather?

We recommend professional dry cleaning only for this genuine lambskin leather. Condition every 3–6 months with a leather conditioner to preserve suppleness and prevent drying, but always test on a hidden area first.

Are the built-in shoulder pads removable? If not, how much structure do they add to the silhouette?

The shoulder pads are built-in and not removable. They add a defined, slightly structured silhouette that balances the fitted bottom without being overly boxy.

Is the satiny lining made of silk or a synthetic material? Is it breathable for extended wear?

The satiny lining is polyester-based, not silk. It is smooth and comfortable but not highly breathable, so it's best for cooler weather or short wear over a thin layer.

Is this style only available in size 38 (EU)? Will there be additional sizes or restocks?

Currently, this Banui Leather Jacket is only available in Black, size 38 (EU). We do not have confirmed information about restocks or additional sizes at this time.

Paloma Wool

Banui Leather Jacket

CA$1,525.00CAD

In Stock

The Banui Leather Jacket is a women's outerwear piece crafted from genuine lambskin leather with a full satiny lining. Key features include a point collar, two-way zip closure, long pull tab buttoned at the shoulder, built-in shoulder pads, and a fitted bottom. It is made in Spain and has a cropped, boxy fit with chest welt pockets and visible topstitching.

Material: Genuine lambskin leather
Gender: female
Style: classic, minimal, tailored
Category: Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

Color

Black

Size

View on merchant site JSON

Specifications

Crafted from premium supple lambskin leather, this modern jacket features clean lines and meticulous craftsmanship, with a two-way zip closure, point collar, and built-in shoulder pads.

Genuine lambskin leather, full satiny lining, two-way zip closure, long pull tab buttoned at shoulder, built-in shoulder pads, fitted bottom, made in Spain.

Material: Genuine lambskin leather
Style: classic, minimal, tailored
Gender: female
Age Group: adult
Condition: new
Category: Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

Additional Attributes

Luxurious genuine lambskin leather
Full satiny lining
Point collar
Two-way zip closure
Long pull tab buttoned at the shoulder
Built-in shoulder pads
Fitted at the bottom
Made in Spain
Premium supple leather
Clean lines and meticulous craftsmanship
Timeless, lasting piece
Develops a beautiful, distinctive patina over time
Elevates any look

Product Insights

The Banui Leather Jacket by Paloma Wool is a timeless, sculptural piece made to order in a family-owned Spanish atelier, delivering in eight weeks. Crafted from 100% Spanish lambskin with natural grain and unique marks, its inverted-triangle silhouette is shaped by fixed shoulder pads and a fitted bottom that maintain structure as the leather softens. A two-way zipper and shoulder tab enable backward or open-from-bottom styling, offering versatility across seasons. However, the polyester satin lining limits breathability, making it best for cool weather or short wear, and it is available only in EU 38 (US 4–6) with a snug fit. Professional cleaning and regular conditioning are required to develop a unique patina. The tradeoff: exclusivity and craftsmanship versus a fixed size, non-breathable lining, and an eight-week wait.

Verified claims

Production: Made to order in a family-owned Spanish atelier with EU traceability.
Design: Timeless design with a sculptural silhouette and functional details for versatile styling.
Delivery timeline: Delivered in 8 weeks, available year-round outside fashion seasons.
Structure: Shoulder pads and fitted bottom maintain the jacket's shape as the leather softens.
Lining: Polyester satin lining; not breathable, best for cool weather or short wear.
Silhouette: Fixed shoulder pads and fitted bottom shape an inverted triangle that is structural without being boxy.
Styling versatility: Two-way zipper and shoulder tab enable backwards or open-from-bottom styling.
Versatile styling: Two-way zip and shoulder tab allow varied styling; inverted silhouette is sharp but wearable.
Leather: 100% lambskin from Spain with natural grain, uneven texture, and surface marks that make each piece unique.
Timelessness: Seasonless release and versatile design make each piece a lasting wardrobe staple.
Craftsmanship: Made to order in a specialized studio; Spanish lambskin develops unique patina with proper care.
Breathability: Polyester satin lining limits airflow; jacket is best for cooler weather or short wear.
Sizing: Single size EU 38 (US 4–6); fitted bottom is snug.
Layering: Polyester lining is not breathable; best worn with thin layers.
Purchase risk: Made to order in Barcelona; delivery takes up to eight weeks.
Care: Clean professionally only; condition every 3-6 months with test on hidden area.
Supply chain: Made in Spain with full EU supply-chain traceability.

Product record

Title: Banui Leather Jacket
Brand: Paloma Wool
Price: 1525 CAD
Availability: In stock

Deep Research

Paloma Wool design philosophy and timeless appeal

The Banui’s ‘Made in Spain’ label means it was manufactured at a family-owned factory in Spain — part of Paloma Wool’s unwavering commitment to local production that has sustained the country’s textile ecosystem since 2014, giving the buyer a garment with transparent, high-touch craftsmanship rather than an anonymous supply chain.
Founder Paloma Lanna calls Paloma Wool a project about ‘the act of getting dressed’ rather than a traditional fashion brand, so the Banui jacket integrates functional details like the two-way zip and shoulder-buttoning pull tab as invitations to personal styling — wear it open from the bottom, backwards, over a dress or jeans — embodying a philosophy that clothes should be lived in, reworked, and never idle in the wardrobe.

Spanish lambskin leather tradition

Paloma Wool produces each Banui jacket to order in a specialized leather studio in Barcelona, not via mass production, so the piece is constructed with the individual care and craftsmanship rhythms that define small-batch Spanish ateliers—aligning with the brand's slow-fashion ethos.
The 'Made in Spain' stamp on the Banui is backed by full EU supply-chain traceability, a legal requirement that ensures the lambskin's origin and processing meet regulated standards—giving substance to the label beyond a simple geographic claim.

Made-to-order production and Barcelona atelier

Paloma Wool disregards the fashion industry's seasonal show schedule, instead dropping pieces continuously throughout the year, so this jacket is conceived as a permanent wardrobe element rather than a fleeting trend piece — its design logic is built to outlast any single season.
The Spanish lambskin is unretouched, carrying uneven texture and surface marks both before and after wear; these are not imperfections but a declaration of the hide's origin, making each jacket visually distinct and quick to develop a personalized patina.
The Banui is produced only after purchase, in a dedicated leather studio in Barcelona, with delivery taking up to eight weeks — a schedule that mirrors atelier-level production and ensures the jacket is assembled with individual attention rather than batch-processed.
Entrusting production to a studio that works exclusively in leather means the jacket benefits from material-specific expertise — from stretching and shaping the lambskin to setting the double-slider zipper cleanly — resulting in a structure that behaves predictably over time rather than sagging or twisting at stress points.

How the inverted triangle silhouette defines the style

The Banui's inverted triangle silhouette is a direct expression of Paloma Wool’s design philosophy, which blurs couture precision with everyday wear—this is not a generic fitted jacket but a piece from a Barcelona label known for sculptural leather work, giving it an artisanal edge over mass-market alternatives.
The subtle shoulder padding carves a clean inverted triangle that the brand describes as 'sharp yet wearable'—indicating a deliberate balance of structure and ease that keeps the jacket from reading aggressively shoulder-heavy, making it suitable for both tailored and casual layering.

Lambskin grain, texture, and how it ages

The Banui is cut from grained lambskin rather than smooth nappa, leaving the hide's natural pores and micro-creases intact — the resulting surface feels matte and tactile, a textured canvas that will deepen visually as patina accumulates over wear.

Image Analysis

3 images

01: Product
Front view of a cropped black leather jacket with a central metal zipper, pointed collar, long set-in sleeves, and subtle horizontal welt seams across the chest. The leather has a smooth, slightly glossy finish and visible panel stitching.
Overall shapeCropped boxy jacket ending near the waist with a straight hem and slightly relaxed torso fit.
1 region
x 0.12 · y 0.08 · w 0.76 · h 0.57 (high)
Material and finishSmooth leather with a low gloss sheen that reflects highlights along curved surfaces and seams.
1 region
x 0.18 · y 0.10 · w 0.64 · h 0.38 (high)
CollarPointed shirt-style collar in the same leather, sitting flat against the neck opening.
1 region
x 0.34 · y 0.02 · w 0.32 · h 0.13 (high)
Center front closureExposed metal zipper runs down the center front with a visible metal slider and a short narrow leather zipper pull strap attached near the bottom.
2 regions
x 0.43 · y 0.14 · w 0.14 · h 0.45 (high); x 0.47 · y 0.47 · w 0.08 · h 0.10 (high)
Chest detailHorizontal narrow welt-like seam or stitched panel across the upper chest on both sides, aligned with the shoulder seam.
1 region
x 0.22 · y 0.16 · w 0.56 · h 0.08 (high)
Sleeve constructionLong sleeves with a horizontal seam around the forearm area creating a slightly paneled look; sleeves are straight and end at the wrist.
2 regions
x 0.12 · y 0.18 · w 0.22 · h 0.55 (high); x 0.66 · y 0.18 · w 0.22 · h 0.55 (high)
Panel stitchingVisible topstitching along vertical panels at the front sides and on shoulder seams.
1 region
x 0.22 · y 0.12 · w 0.56 · h 0.50 (high)
Inner layer visibleA sheer dark top worn under the jacket is visible through the open front but is not part of the product.
1 region
x 0.40 · y 0.24 · w 0.20 · h 0.25 (high)
Other
Cropped studio shot showing a model from chin to hips against a plain light gray background. Model wears denim jeans with metal rivet details; soft even lighting produces mild highlights on the leather and minimal cast shadow.
Model crop and posePhotograph shows a front-facing model cropped at the chin and hips with arms relaxed and hands near the thighs.
1 region
x 0.08 · y 0.00 · w 0.84 · h 1.00 (high)
BackgroundUniform light gray background with no visible props or packaging.
Supporting garmentBlue denim jeans with decorative metal rivets along the front pocket edge and side seam are visible below the jacket.
1 region
x 0.20 · y 0.60 · w 0.60 · h 0.34 (high)
Lighting and reflectionsSoft studio lighting creates diffuse highlights on leather surfaces and small specular reflections along curved seams and shoulders.
Colors
deep black· leather body, collar and sleeves#0D0D0E
02: Product
Close-up of the upper front of a black leather jacket showing collar, center zipper, chest welt pockets, panel seams, and a thin leather strap draped over the front.
CollarFolded pointed shirt-style collar made from the same black leather with visible topstitching along the collar edge.
1 region
x 0.35 · y 0.06 · w 0.42 · h 0.17 (high)
Center zipperExposed vertical zipper runs down the garment center with visible zipper tape and stitching on either side.
1 region
x 0.52 · y 0.17 · w 0.14 · h 0.64 (high)
Chest welt pocketsPair of horizontal welt pocket openings located high on the chest, each defined by narrow stitched edges.
1 region
x 0.23 · y 0.18 · w 0.49 · h 0.07 (high)
Leather finishSmooth, slightly glossy black leather surface with subtle natural texture and soft highlights from studio lighting.
1 region
x 0.12 · y 0.17 · w 0.76 · h 0.65 (high)
Sleeve and shoulder panelsSet-in sleeve with visible curved panel seams at the shoulder and long sleeve with seamlines and topstitching.
1 region
x 0.02 · y 0.22 · w 0.36 · h 0.61 (high)
Thin leather strapThin rounded leather strap or cord, same black finish as jacket, draped from the shoulder and forming a loose U-shape across the front.
1 region
x 0.31 · y 0.15 · w 0.36 · h 0.52 (high)
Panel seam at front sideVertical front side panel seam visible to the wearers left, with narrow topstitching defining the panel join.
1 region
x 0.27 · y 0.36 · w 0.22 · h 0.50 (high)
Other
Studio product shot showing a partial model wearing the jacket against a light neutral background; image crops at mid-torso and includes model jawline and hair at the top right.
Shot compositionTight three-quarter close-up framed from the left front of the garment, cropping out lower body and most of the model's face.
BackgroundEven light gray background with soft studio lighting producing subtle reflections on the jacket surface.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (low)
Model visiblePartial view of model's right jaw, neck, and long dark hair visible at the top right edge of the frame.
1 region
x 0.64 · y 0.00 · w 0.36 · h 0.29 (high)
Lighting and reflectionsStudio highlights and soft reflections emphasize the leather sheen and curved surfaces, with minimal shadows.
Colors
gloss black· jacket body, collar, sleeves and strap#0D0D0E
03: Product
Rear view of a cropped black leather jacket on a model, showing panel stitching, a horizontal yoke seam, a short straight hem, long set-in sleeves, and a small collar.
Overall viewBack side of a cropped black leather jacket worn by a model, centered in frame with the jacket covering the upper back and ending at the natural waist.
1 region
x 0.03 · y 0.02 · w 0.94 · h 0.66 (medium)
Panel constructionVertical panel seams create three back panels with a central seam and two side princess seams running from the yoke to the hem.
1 region
x 0.17 · y 0.12 · w 0.66 · h 0.48 (high)
Horizontal yokeA horizontal seam across the upper back forms a yoke below the collar.
1 region
x 0.10 · y 0.05 · w 0.80 · h 0.12 (high)
CollarShort turned collar visible at the nape with a stitched seam along its base.
1 region
x 0.45 · y 0.00 · w 0.30 · h 0.10 (high)
HemlineStraight, slightly cropped hem finishing at the waistband level of the jeans, with visible topstitching along the edge.
1 region
x 0.16 · y 0.58 · w 0.68 · h 0.08 (high)
SleevesLong set-in sleeves with smooth curved shoulder seams and slight natural creasing; sleeves continue past the wrist area with a visible cuff detail on the right sleeve.
2 regions
x 0.00 · y 0.14 · w 0.30 · h 0.62 (medium); x 0.70 · y 0.14 · w 0.30 · h 0.62 (medium)
Cuff hardwareSmall metal zipper pull or snap hardware visible near the right sleeve cuff at the wrist, partially visible against the cuff edge.Partial
1 region
x 0.87 · y 0.64 · w 0.06 · h 0.10 (medium)
Leather surfaceSmooth glossy leather finish with subtle natural grain and highlights from studio lighting.
1 region
x 0.20 · y 0.10 · w 0.60 · h 0.48 (high)
TopstitchingVisible narrow topstitching along seams and edges, matching the jacket color.
1 region
x 0.12 · y 0.04 · w 0.76 · h 0.62 (high)
Other
Studio product shot showing the model from behind against a plain light gray background; visible lower torso in jeans and hands at sides; even soft lighting with mild reflections on leather.
BackgroundUniform light gray background with no visible props.
Model presenceModel cropped from the mid-neck down to the upper thighs, wearing blue denim jeans visible below the jacket hem and hands visible at the sides.
1 region
x 0.10 · y 0.58 · w 0.80 · h 0.40 (high)
Lighting and reflectionsSoft studio lighting creating even illumination and small specular highlights on the leather surface.
Image cropImage cropped so the top of the model head is partially out of frame and the lower hands are included to just below the hips.
Colors
gloss black· jacket body and sleeves#0D0D0E

Documents & Data

Q&A

5 answered

I typically wear a US size 4 or 6. Would the size 38 fit true to size, or should I size up or down given the fitted bottom?: EU size 38 typically corresponds to US 4–6. The fitted bottom means it's intended to be snug, so if you're between sizes, you may prefer the larger end of that range, but we only carry size 38.
What is the recommended care routine for this lambskin leather jacket? Can it be professionally dry cleaned, and how often should it be conditioned to maintain the leather?: We recommend professional dry cleaning only for this genuine lambskin leather. Condition every 3–6 months with a leather conditioner to preserve suppleness and prevent drying, but always test on a hidden area first.
Are the built-in shoulder pads removable? If not, how much structure do they add to the silhouette?: The shoulder pads are built-in and not removable. They add a defined, slightly structured silhouette that balances the fitted bottom without being overly boxy.
Is the satiny lining made of silk or a synthetic material? Is it breathable for extended wear?: The satiny lining is polyester-based, not silk. It is smooth and comfortable but not highly breathable, so it's best for cooler weather or short wear over a thin layer.
Is this style only available in size 38 (EU)? Will there be additional sizes or restocks?: Currently, this Banui Leather Jacket is only available in Black, size 38 (EU). We do not have confirmed information about restocks or additional sizes at this time.

Provenance

Merchant Link: https://www.simons.ca/en/women-designer/coats/banui-leather-jacket--23120-18426303?colourId=0
Updated: August 10, 2026