Long Wide-Baffle Puffer Jacket

Long wide-baffle puffer jacket with wind-resistant stretch nylon, warm insulation, and a plant-based water-repellent finish.

Wind-resistant stretch nylon fabric; Teflon EcoElite water-repellent finish; polyester insulation; recycled polyester lining; zip closure under snap-button placket; fleece-lined zipped pockets; thumbhole cuffs; large hood; side buttons.

Material

Stretch nylon fabric; polyester insulation; recycled polyester lining

Secondary

polyester, recycled-polyester

Style

casual, technical, insulated, utilitarian

Occasion

everyday, casual, travel

Gender

female

Age Group

adult

Condition

new

Category

Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

01

Product

Long, knee-to-calf length black puffer coat with wide horizontal baffles, attached hood, full-length front opening with visible snap closures and a visible side zipper near the hem. Two inset hand pockets with model hands inserted; matte shell fabric.

• Overall silhouetteLong straight silhouette reaching below the model's knees with a slightly relaxed fit through the body.
  1 region

  x 0.25 · y 0.18 · w 0.50 · h 0.72 (high)
• Baffle quiltingWide horizontal baffle quilting running across the body and sleeves, creating broad padded panels.
  1 region

  x 0.35 · y 0.32 · w 0.48 · h 0.52 (high)
• Hood constructionAttached hood with visible padded construction that continues the baffle pattern and sits around the model's shoulders.
  1 region

  x 0.38 · y 0.05 · w 0.36 · h 0.18 (high)
• Front closureFull-length front opening with visible snap studs along the placket and a central zipper partially obscured by placket.
  1 region

  x 0.37 · y 0.16 · w 0.18 · h 0.62 (high)
• Side hem zipper and snapsVisible vertical side zipper and snap at the lower hem on the coat's right side (viewer left), creating a side vent when open.
  1 region

  x 0.62 · y 0.58 · w 0.18 · h 0.32 (high)
• PocketsInset hand pockets located at hip level; model's hands are placed inside them.
  2 regions

  x 0.34 · y 0.58 · w 0.12 · h 0.14 (high); x 0.54 · y 0.58 · w 0.12 · h 0.14 (high)
• Sleeve cuffsSlightly gathered/elasticized sleeve cuffs creating a snugger wrist opening inside the baffle sleeve.
  2 regions

  x 0.32 · y 0.54 · w 0.14 · h 0.14 (medium); x 0.56 · y 0.44 · w 0.16 · h 0.20 (medium)
• Shell finishMatte woven shell fabric with a smooth appearance; no visible sheen.

Other

Studio shot with a neutral light gray backdrop and even soft lighting. Product shown on a standing model wearing additional garments and accessories; faint floor shadow visible.

• Model stylingModel wearing the coat over other garments (visible pullover and track pants) and accessories including a cap and scarf tied under the chin.
  1 region

  x 0.18 · y 0.02 · w 0.64 · h 0.28 (high)
• Shot compositionThree-quarter front view of the model, full body visible and centered in frame with even margins around.
• BackgroundSmooth neutral light gray backdrop with soft shadow beneath the model toward the bottom left.
  1 region

  x 0.00 · y 0.80 · w 1.00 · h 0.20 (high)
• LightingEven, diffused studio lighting producing soft shadows and consistent exposure across the coat.

Colors

black· shell fabricmetallic silver· snap studs and zipper hardware

02

Product

Front upper portion of a long puffer jacket in a solid black matte fabric with wide horizontal baffles, an attached hood, central snap-button placket, and welt pockets partially visible at the hips.

• Overall silhouetteVisible upper-front and sleeves of a long puffer jacket with wide horizontal baffle quilting and a straight center front.
  1 region

  x 0.04 · y 0.18 · w 0.92 · h 0.74 (high)
• Outer fabric and finishMatte black woven shell fabric with a smooth, slightly textured appearance and no visible sheen.
  1 region

  x 0.05 · y 0.28 · w 0.90 · h 0.60 (high)
• Hood constructionAttached hood with a padded interior and the same baffle quilting; hood sits upright around the neck opening.
  1 region

  x 0.17 · y 0.06 · w 0.66 · h 0.26 (high)
• Center front closurePlacket down the center front with visible round matte black snap buttons; an inner zipper is visible peeking from beneath the placket near the neck.
  2 regions

  x 0.36 · y 0.28 · w 0.28 · h 0.58 (high); x 0.44 · y 0.21 · w 0.12 · h 0.12 (high)
• Quilting patternWide horizontal baffles across the body and sleeves, with stitch lines visible between each baffle.
  1 region

  x 0.06 · y 0.30 · w 0.88 · h 0.62 (high)
• Side pocket openingsVertical welt pocket openings located at the lower front sides, seams visible but pocket interiors not shown.
  2 regions

  x 0.07 · y 0.62 · w 0.36 · h 0.18 (medium); x 0.57 · y 0.62 · w 0.36 · h 0.18 (medium)

Other

Studio portrait crop showing a model wearing the jacket; neutral gray background, soft even lighting, and additional worn garments and accessories visible but not part of the product.

• Model and stylingImage shows a model from mid-thigh up wearing the jacket along with a black baseball cap, a light blue bandana tied under the chin, and a light blue zippered underlayer.
  1 region

  x 0.12 · y 0.00 · w 0.76 · h 0.28 (high)
• Cap logoWhite interlocking letter logo embroidered on the front of the black baseball cap.
  1 region

  x 0.35 · y 0.02 · w 0.30 · h 0.16 (high)
• Lighting and backgroundEven, soft studio lighting with minimal shadows and a smooth neutral light gray background.

Colors

matte black· outer shell

03

Product

Rear view of a long, matte-black, wide-baffle puffer coat with an attached hood, horizontal quilting, ribbed sleeve cuffs, and a short side slit at the hem; shown on a model to mid-calf length.

• Overall silhouetteLong straight silhouette reaching to mid-calf on the model, with wide horizontal quilted baffles stacked along the back.
  1 region

  x 0.22 · y 0.06 · w 0.52 · h 0.86 (high)
• Attached hoodThree-panel attached hood in the same quilted fabric as the coat, lying flat against the upper back.
  1 region

  x 0.43 · y 0.03 · w 0.20 · h 0.18 (high)
• Horizontal bafflesWide horizontal quilting lines create distinct rectangular baffle sections across the back and sleeves.
  1 region

  x 0.28 · y 0.12 · w 0.44 · h 0.72 (high)
• Sleeve cuffsBlack ribbed inner cuffs visible at sleeve ends, creating a fitted finish inside the quilted sleeves.
  2 regions

  x 0.35 · y 0.56 · w 0.12 · h 0.10 (high); x 0.56 · y 0.58 · w 0.11 · h 0.12 (high)
• Side hem slitShort vertical slit at the lower side hem on the model's left side (image right), interrupting the bottom baffle.
  1 region

  x 0.66 · y 0.80 · w 0.08 · h 0.18 (high)
• Fabric finishMatte black outer fabric with a smooth, slightly textured appearance; no visible sheen.
• Back seam/detailSubtle horizontal stitch at mid-back creating a narrower baffle band across the shoulder blade area.
  1 region

  x 0.34 · y 0.22 · w 0.32 · h 0.06 (medium)

Other

Studio rear-angle product shot on a model; neutral light grey background; model wearing additional garments and headwear that are not part of the product.

• Model and stylingModel is shown from the rear with head turned slightly to the left; visible hands at sides and wearing black track pants with white side stripes.
  1 region

  x 0.30 · y 0.72 · w 0.42 · h 0.28 (high)
• Additional headwearModel wears a black baseball cap topped with a light-blue bandana-style hood or scarf under the coat hood; this headwear overlaps the coat hood.
  1 region

  x 0.37 · y 0.01 · w 0.26 · h 0.13 (high)
• Background and lightingEven, soft studio lighting on a neutral light grey seamless background with a faint floor shadow beneath the model.
• Image crop and qualityFull-body vertical crop with small margin around subject; image is sharp with clear detail on fabric and stitching.

Colors

matte black· body and hood#0E0D12deep black· ribbed sleeve cuffs#0E0D12