Solid Zipped Leather Card Holder

Compact genuine leather card holder with multiple card slots and a zippered change pocket.

Multiple card slots, zip change pocket, genuine leather, polyester lining

Material

Genuine leather, polyester lining

Secondary

polyester

Style

minimal, classic

Occasion

everyday, travel

Gender

unisex

Age Group

adult

Condition

new

Dimensions

5.25x0.5x3 in

Category

Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

01

Product

Front-facing rectangular card holder in smooth red leather with a top-right curved zip and small gold metal logo centered on the front face.

• Overall shapeHorizontal rectangular card holder with a shallow depth, straight bottom edge and a rounded top-right corner where the zipper runs.
  1 region

  x 0.06 · y 0.59 · w 0.88 · h 0.32 (high)
• Material and finishSmooth, uniformly finished leather surface with visible fine grain and matte-to-satin sheen.
  1 region

  x 0.07 · y 0.60 · w 0.82 · h 0.28 (high)
• Front pocket seamHorizontal exterior card pocket seam runs across the upper third of the front panel, indicated by a stitched line.
  1 region

  x 0.09 · y 0.64 · w 0.82 · h 0.06 (high)
• Stitching detailVisible single-line topstitching follows the outer edges and pocket seam in matching thread color.
  1 region

  x 0.08 · y 0.62 · w 0.84 · h 0.24 (high)
• Zipper and pullMetal zipper runs along the top and down the right side to the rounded corner; zipper teeth and a gold metal pull are visible with a small leather tab attached to the pull.
  2 regions

  x 0.12 · y 0.58 · w 0.20 · h 0.12 (high); x 0.82 · y 0.62 · w 0.12 · h 0.20 (high)
• Front metal logoSmall gold metal logo centered on the front panel, raised from the leather surface.
  1 region

  x 0.47 · y 0.67 · w 0.06 · h 0.08 (high)
• Legible logo text“RLL”
  1 region

  x 0.47 · y 0.67 · w 0.06 · h 0.08 (high)

Other

Studio product shot on a uniform light gray background with soft front lighting and a faint shadow beneath the product; image is tightly cropped to show the product centered horizontally near the lower third of the frame.

• BackgroundEven light gray background with no visible texture or props.
• ShadowSoft diffuse shadow under the wallet consistent with overhead/front lighting, anchoring the product to the surface.
  1 region

  x 0.20 · y 0.86 · w 0.60 · h 0.06 (medium)
• Shot compositionProduct centered horizontally, shown at a straight-on frontal angle with the front face fully visible and the right edge slightly turned toward the camera due to the rounded zip path.

Colors

bright red· main body#B31C32warm gold metallic· metal hardware and logo

02

Product

A horizontal rectangular red leather card holder with perimeter stitching, multiple vertical card slots on the left, and a top zipper with a small leather tab and gold hardware.

• Overall shapeHorizontal rectangular card holder with a rounded top-left corner and squared bottom-right corner visible.
  1 region

  x 0.05 · y 0.45 · w 0.90 · h 0.38 (high)
• Material and finishSmooth grained leather surface with a low sheen, uniformly colored across the visible face.
  1 region

  x 0.06 · y 0.52 · w 0.86 · h 0.28 (high)
• Perimeter stitchingSingle-row visible stitching runs around the outer edge of the card holder, matching the holder color.
  1 region

  x 0.06 · y 0.52 · w 0.86 · h 0.28 (high)
• Card slot panelPanel of vertical card slots on the left side consisting of several narrow slots separated by stitch lines and showing dark interior edges between slots.
  1 region

  x 0.06 · y 0.52 · w 0.28 · h 0.32 (high)
• Top zipper and pullTop-mounted zipper follows the top edge from the left rounded corner to near the right edge; zipper pull has a small leather tab and is attached to gold-tone metal hardware.
  1 region

  x 0.68 · y 0.44 · w 0.18 · h 0.12 (high)
• Zipper teethZipper teeth are visible along the top edge and appear to be the same red color as the leather with fine tooth detail.
  1 region

  x 0.06 · y 0.44 · w 0.80 · h 0.08 (medium)
• Slot edge contrastThin dark lines define the interior edges of the card slots, creating a contrast against the red leather.
  1 region

  x 0.14 · y 0.54 · w 0.10 · h 0.30 (medium)

Other

Studio product photograph on a light neutral background with soft shadow beneath the item and centered composition showing the front face of the card holder.

• Background and stagingLight neutral gray background with consistent even lighting and no visible props.
• ShadowSoft shadow directly beneath the card holder suggesting frontal overhead lighting.
  1 region

  x 0.10 · y 0.78 · w 0.80 · h 0.10 (medium)
• Shot compositionProduct centered horizontally and positioned in the lower half of the frame with ample empty space above.

Colors

medium red· main body#B32B3Bwarm gold metallic· hardwaredeep black· slot edge trim