Basketweave Card Holder

Compact card holder with pebbled faux leather and multiple card slots plus a zip change pocket.

Multiple card slots, zip change pocket, pebbled faux leather exterior

Material

Pebbled faux leather exterior, polyester lining

Secondary

polyester

Gender

female

Age Group

adult

Condition

new

Category

Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

01

Product

Front-facing black card holder with a woven basketweave textured panel on the right, three vertical card slots on the left, and a top zipper with a black leather pull and metallic teeth.

• Overall shapeRectangular compact card holder with slightly rounded corners and visible edge topstitching along the perimeter.
  1 region

  x 0.06 · y 0.22 · w 0.88 · h 0.60 (high)
• Basketweave panelRaised basketweave quilted texture on a rectangular panel occupying the right two thirds of the front face; individual diagonal raised strips form a grid of diamond shapes.
  1 region

  x 0.45 · y 0.35 · w 0.45 · h 0.48 (high)
• Card slotsThree vertical card slots stitched into the left side of the front face, separated by narrow stitched channels and forming stacked openings toward the top edge.
  1 region

  x 0.06 · y 0.33 · w 0.25 · h 0.50 (high)
• Top zipperFull-width metal-toothed zipper along the top edge with gold-colored teeth visible; zipper track set into a stitched leather channel.
  1 region

  x 0.20 · y 0.12 · w 0.60 · h 0.10 (high)
• Zipper pullShort black leather pull tab attached to the zipper slider with a small metal ring; pull lays flat on top of the zipper near the left of center.
  1 region

  x 0.36 · y 0.09 · w 0.20 · h 0.10 (high)
• Material finishSmooth, slightly glossy black leather or leather-like surface on both woven and flat areas, with visible stitching lines and slightly raised padded texture on the woven sections.
  1 region

  x 0.06 · y 0.22 · w 0.88 · h 0.60 (high)

Other

Studio product shot on a neutral light grey background with soft frontal lighting and a faint shadow below the product; image centered and cropped to show front face.

• Background and stagingUniform pale grey background with no props; product centered horizontally and vertically within the frame.
• Lighting and shadowSoft diffuse frontal lighting producing mild highlights on the leather surface and a subtle soft shadow directly beneath the product.
• Image crop and framingProduct fully visible with small margin to image edges; top of the zipper and full front face visible indicating a front-facing view.

Colors

black· body#0E0E0Cmetallic gold· zipper teeth

02

Product

Front-facing black card holder with a raised basketweave panel on the left, vertical card slots on the right, and a top zipper with a leather pull and gold-tone hardware.

• Overall shapeRectangular flat card holder with rounded corners and a slim profile, shown facing forward.
  1 region

  x 0.07 · y 0.36 · w 0.86 · h 0.44 (high)
• Basketweave panelLeft-facing panel features a raised woven or basketweave square pattern made from the same black material, each weave element slightly padded and creating a grid of diagonal squares.
  1 region

  x 0.08 · y 0.52 · w 0.48 · h 0.36 (high)
• Card slot panelRight panel has three vertical card slots defined by stitched lines; slots are aligned vertically along the right edge and the panel is smooth without the woven texture.
  1 region

  x 0.56 · y 0.52 · w 0.34 · h 0.36 (high)
• Top zipper and pullTop-edge zipper runs the full width; a leather tab pull sits near the center-top and is attached to a gold-tone metal zipper slider and chain.
  2 regions

  x 0.52 · y 0.36 · w 0.34 · h 0.16 (high); x 0.70 · y 0.36 · w 0.18 · h 0.12 (medium)
• Material and finishSmooth, slightly glossy black leather-like material with visible stitching along edges and slot seams; woven panel has subtle padded relief.
• Edge stitching detailSingle-line topstitching visible along the top edge and around the perimeter of the holder, matching black thread.
  1 region

  x 0.07 · y 0.36 · w 0.86 · h 0.22 (medium)

Other

Studio product shot on a neutral light gray background with even front lighting and a soft shadow beneath the item; image is cropped with the product centered horizontally and placed in the lower half of the frame.

• Background and stagingUniform light gray background with no visible props or packaging.
• Shadow and lightingSoft drop shadow directly beneath the card holder indicating diffuse overhead studio lighting and minimal reflections.
  1 region

  x 0.23 · y 0.72 · w 0.54 · h 0.06 (medium)
• View and compositionStraight-on frontal view centered in frame, showing the product's front face and top edge zipper; no hands or models present.

Colors

black· main body#0E0E0Cwarm gold· zipper hardware