Mamari
Cyrielle Ring
CA$69.00CAD
In Stock
The Cyrielle Ring is a thin gold-tone ring featuring a milgrain-textured band and a dangling sunburst charm set with cubic zirconia stones. It is made from 18-karat gold-plated recycled brass and measures 7 mm in width. The ring is crafted in France and includes a signature pouch.
- Material
- 18-karat gold-plated recycled brass
- Category
- Apparel & Accessories > Jewelry > Rings
Color
Assorted
Size
79
Specifications
Ring featuring a cubic zirconia stone set in 18-karat gold-plated recycled brass, crafted in France.
Cubic zirconia stone, gold-plated recycled brass construction, made in France, includes signature pouch
- Material
- 18-karat gold-plated recycled brass
- Gender
- female
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Rings
Additional Attributes
- Cubic zirconia
- 18-karat gold-plated recycled brass
- Made in France
- Signature pouch included
- Width: 7 mm
Product Insights
The Cyrielle Ring by Mamari is a French-made, 18k gold-plated recycled brass ring featuring a cubic zirconia stone with higher dispersion than diamond, offering strong rainbow flashes and an eco-friendly profile with up to 80% lower CO₂ emissions. Its 3-micron gold plating meets French legal standards but is soft and scratches easily, while chlorine exposure can cause patchy damage; the stone resists chipping in daily wear, though edges may dull over time. The ring is available only in whole sizes 7 and 9, requires careful maintenance (avoid water, perfumes, lotions) and occasional professional replating ($30–80) to restore its finish.
Verified claims
- Plating thickness
- Gold plating is at least 3 microns thick, per French law.
- Plating standard
- 18k gold-plated recycled brass meets French 3-micron standard for 'plaqué or'.
- Prestige
- French jewellery prestige enhances the ring's 'Made in France' appeal.
- Recycled brass
- Recycled brass positions ring in French sustainable jewellery niche.
- Replating
- Professional replating for $30–$80 restores the ring's gold finish.
- Market positioning
- Made in France with recycled brass taps into French eco-conscious jewelry niche.
- Dispersion
- Higher dispersion than diamond, producing stronger rainbow flashes.
- Maintenance
- Dullness from daily wear is a removable film; mild soap restores full brilliance.
- Edge sharpness
- Edges may dull over time despite Mohs 8–8.5 hardness
- Cloudiness
- Cloudiness is surface film, not damage; clean with soap and water
- Market consistency
- Proven technology with consistent quality since 1976
- Chlorine risk
- Chlorine turns gold plating patchy in one season of pool wear.
- Gold finish trade-off
- 18K gold's deeper yellow tone scratches more easily than 14K.
- Plating quality
- Gold plating meets the French legal minimum of 3 microns thickness.
- Cubic zirconia
- Cubic zirconia stone (8–8.5 Mohs) resists chipping in daily wear.
- Environmental impact
- Recycled brass construction cuts CO₂ emissions up to 80% and energy use up to 50% versus virgin materials.
- Size availability
- Only whole sizes 7 and 9; no half sizes or adjustability.
- Care routine
- Avoid water, perfumes, lotions; store in pouch; wipe stone with soft cloth.
- Gold plating
- French 3-micron thickness standard; 18k is soft; replating costs $30–$80.
Product record
- Title
- Cyrielle Ring
- Brand
- Mamari
- Price
- 69 CAD
- Availability
- In stock
Deep Research
What 'Made in France' means for jewelry
- French legislation mandates that for a piece to be labelled ‘plaqué or’ (gold-plated) the gold layer must be at least 3 microns thick; since Mamari describes the Cyrielle Ring as 18-karat gold-plated and manufactures it in France, the plating must meet that standard, which translates into a more abrasion-resistant finish and longer colour retention than costume jewellery from jurisdictions without such a statutory floor.
- The French jewellery industry is internationally coded as a world leader in creativity and luxury goods, with even the country’s trade media describing its output as ‘peerless, precious, intricate’; that halo extends to accessible accessories like a $69 ring, making the origin itself a design endorsement that can elevate a simple gift or personal treat into something that reads as deliberately chosen and taste-aware.
- The 2014 CBI product factsheet for costume jewellery in France flagged recycled jewellery as a strategic niche with market-opening potential; Mamari’s choice of recycled brass therefore positions the Cyrielle ring squarely within an eco-conscious segment that French consumers and retailers regard as increasingly relevant, adding an ethical-credibility layer to the made-in-France appeal.
Durability of gold plating on brass jewelry
- Chlorinated water from swimming pools and hot tubs attacks gold plating with unusual speed, capable of turning a pristine ring patchy in a single summer of regular pool wear, so even a brief dip without removal can undo months of careful dry-wear preservation — a risk that goes well beyond the general ‘avoid water’ advice.
- Because 18-karat gold (75% pure) is softer than 14-karat gold plating, this ring may develop fine surface scratches slightly sooner with daily wear, but the higher gold content produces a noticeably warmer, more saturated yellow color than lower-karat alternatives — a classic beauty-versus-durability tradeoff in gold plated jewelry.
- A professional replating service, typically costing $30–$80, can strip the worn gold layer from the brass ring and apply a fresh electroplated 18k finish — restoring the ring to its original appearance and effectively making it a renewable accessory rather than a disposable one.
Environmental impact of recycled brass
- Brass retains its material properties through unlimited recycling cycles without quality loss, so the Cyrielle ring’s metal can be recovered, remelted, and remade into a new piece at end-of-life — a closed loop that prevents metal waste and further resource extraction.
- Producing recycled brass consumes up to 50% less energy than virgin brass made from newly mined copper and zinc, directly reducing the carbon footprint of the metal before it ever reaches the ring’s design or plating processes.
- A kilogram of brass jewellery creates about 80% less CO₂ than the same weight in solid gold, so this ring’s 18k gold-plated brass construction delivers a gold aesthetic with a fraction of the climate impact that a solid gold ring would carry.
- An estimated 90% of the brass used in jewellery today comes from recycled scrap — old pipes, fittings, and industrial by-products — so a brand specifying 'recycled brass' is tapping into a stream that is already overwhelmingly circular, diverting waste and avoiding new mining at scale.
What to expect from a cubic zirconia stone
- Cubic zirconia has been the dominant diamond simulant since commercial production began in 1976, offering decades of proven optical consistency and manufacturing refinement that makes it a reliable, predictable gem material rather than a fleeting substitute.
- Cloudiness or dullness in cubic zirconia typically arises from a removable film of oils, lotions, and cosmetics on the stone's surface rather than a permanent chemical change, so a ring that looks foggy after daily wear can be restored to full brilliance with simple cleaning rather than replacement.
- With a dispersion rating of 0.058–0.066 compared to diamond's 0.044, cubic zirconia produces stronger rainbow-colored light flashes, making it a livelier, more colorful stone under both natural and artificial light, so the wearer gets a bolder sparkle than a diamond would deliver at this size.
- Cubic zirconia scores between 8.0 and 8.5 on the Mohs hardness scale — harder than most semi-precious gems — giving it enough durability for daily ring wear, though the stone will eventually develop surface scratches that can be polished out, meaning it maintains its overall integrity but loses the sharpest facet edges over time.
Image Analysis
2 images- 01
Product
A thin gold-tone circular ring with a textured milgrain-like outer edge and a small dangling star/sun-shaped charm set with a central clear stone and several smaller clear stones.
- Band shapeThin circular metal band viewed nearly flat on, forming an unbroken ring with uniform width.
1 region
x 0.20 · y 0.53 · w 0.60 · h 0.18 (high) - Band finishHighly polished gold-tone metal surface with reflective highlights on the top inner curve.
1 region
x 0.20 · y 0.53 · w 0.60 · h 0.18 (high) - Band edge detailNarrow decorative milgrain-style textured row running along the outer rim of the band.
1 region
x 0.20 · y 0.56 · w 0.60 · h 0.10 (medium) - Dangling charmSmall attached charm suspended from the band, shaped like a stylized star or sun with a central round clear stone surrounded by multiple smaller clear stones and a scalloped metal outline.
1 region
x 0.38 · y 0.65 · w 0.12 · h 0.12 (high) - StonesMultiple small faceted clear stones set in the charm, producing bright specular highlights.
1 region
x 0.39 · y 0.66 · w 0.10 · h 0.08 (high)
Other
Studio product shot on a seamless white background with soft shadow below the ring and even diffuse lighting; image is centered on the lower half of the frame with the ring slightly rotated.
- BackgroundSmooth even white background filling the frame.
- ShadowSoft diffuse shadow cast to the lower-right of the ring and charm, indicating overhead lighting.
1 region
x 0.30 · y 0.62 · w 0.40 · h 0.20 (medium) - Shot compositionProduct positioned near the lower center of the image with substantial empty space above.
- Image qualitySharp focus on the ring and charm with clear fine detail; even lighting with minimal glare except natural reflections on metal.
Colors
warm polished gold· band and charm metal#DCC394clear (sparkling)· stones#F6F6F8- Band shapeThin circular metal band viewed nearly flat on, forming an unbroken ring with uniform width.
- 02
Product
Close-up of a thin gold-toned ring with a milgrain-textured edge and a small dangling sunburst charm featuring a round clear stone set in the center.
- Band profileThin circular metal ring band visible in cross-section near the top of the frame; band has a smooth, slightly rounded outer surface and a flat inner edge.
1 region
x 0.03 · y 0.12 · w 0.94 · h 0.22 (medium) - Decorative edgeContinuous row of small raised bead-like milgrain detailing along the outer side of the band.
1 region
x 0.10 · y 0.20 · w 0.80 · h 0.12 (high) - Dangling charm attachmentSmall jump ring attaches a pendant to the band; jump ring is oval and sits on the underside of the band.
1 region
x 0.40 · y 0.30 · w 0.16 · h 0.14 (high) - Sunburst charm shapePendant is a sunburst shape with multiple short rounded rays radiating from a central circular bezel.
1 region
x 0.34 · y 0.44 · w 0.28 · h 0.36 (high) - Center stoneRound faceted clear stone set flush in the central bezel of the charm, reflecting highlight colors.
1 region
x 0.43 · y 0.56 · w 0.10 · h 0.10 (high) - Metal finishHighly polished reflective yellow-gold metal finish visible on both band and charm surfaces.
1 region
x 0.03 · y 0.12 · w 0.94 · h 0.68 (medium)
Other
Studio-style close-up with neutral light background; image crops the left and lower edges of the ring and shows soft shadows and reflections.
- Shot compositionTight close-up framing focused on the lower portion of the ring and its dangling charm; top portion of ring extends beyond the right edge of the frame.
- BackgroundSolid light neutral background with minimal texture and no visible props.
- Lighting and reflectionsSoft even studio lighting producing gentle specular highlights on the metal and a small bright highlight on the center stone; subtle shadowing beneath the charm.
Colors
polished yellow gold· band#BCA57Bpolished yellow gold· charmclear crystal (bright white with cool highlights)· center stone- Band profileThin circular metal ring band visible in cross-section near the top of the frame; band has a smooth, slightly rounded outer surface and a flat inner edge.
Documents & Data
Q&A
2 answered- Is the ring available in half sizes or is it adjustable?
- The ring is available in whole sizes (7 and 9) and is not adjustable. No half sizes are offered.
- Does the ring require special care to maintain the gold plating?
- To maintain the 18-karat gold plating, avoid contact with water, perfumes, lotions, and harsh chemicals. Store the ring in the provided signature pouch when not worn to prevent scratching.