Quest Leather Hiking Boots Men

Premium leather hiking boots with traditional outdoor styling, Italian leather construction, and rugged Vibram traction.

Italian leather upper, mid-height ankle support, Kevlar base stiffener, padded collar, leather-covered padded footbed, silver metal eyelets and hooks, metal tongue stud, Vibram rubber outsole, branded dust bags included, made in Portugal.

Material

Premium genuine leather upper; leather top cover; Kevlar stiffener; Vibram rubber outer sole; silver metal eyelets and hooks

Secondary

rubber, metal

Style

classic, heritage, utilitarian, minimalist, scandinavian

Occasion

hiking, travel, everyday, casual

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Shoes

01

Product

Side view of a single low-cut hiking boot showing mixed smooth leather and textured suede upper, metal lace hardware, rounded laces, padded collar with visible tan lining, stitched welt, and a lug rubber outsole.

• View and orientationLateral side view of one boot pointing to the right with the outer side fully visible and the sole resting on a flat surface.
  1 region

  x 0.05 · y 0.48 · w 0.90 · h 0.37 (high)
• Upper material - smooth leatherSmooth leather panels on the vamp and ankle area with a matte to low-sheen finish visible on the mid and front upper.
  1 region

  x 0.38 · y 0.53 · w 0.46 · h 0.18 (high)
• Upper material - textured suedeTextured suede panels covering the lower sidewall, heel counter, and toe apron with a napped surface distinct from the smooth leather.
  2 regions

  x 0.05 · y 0.57 · w 0.66 · h 0.27 (high); x 0.05 · y 0.48 · w 0.18 · h 0.20 (medium)
• Collar and liningPadded ankle collar finished in black on the outside with a visible tan leather lining at the top opening.
  1 region

  x 0.24 · y 0.49 · w 0.18 · h 0.08 (high)
• Lacing systemRound black laces with small light-colored flecks threaded through metal D-ring eyelets and two upper metal speed-hooks; laces shown tied in a loose knot on the outer side.
  1 region

  x 0.46 · y 0.50 · w 0.28 · h 0.22 (high)
• Eyelet hardwareShiny silver-toned metal D-ring eyelets along the lower lace row and open hook-style eyelets at the top.
  1 region

  x 0.50 · y 0.52 · w 0.18 · h 0.16 (high)
• Welt and stitchingVisible stitched welt joining the upper to the sole, running around the perimeter above the outsole.
  1 region

  x 0.08 · y 0.72 · w 0.84 · h 0.10 (high)
• Outsole and treadThick black rubber lug outsole with pronounced rectangular and triangular tread blocks and a raised heel block.
  1 region

  x 0.05 · y 0.76 · w 0.88 · h 0.18 (high)
• Toe shapeRounded toe capped by the suede apron that extends up from the sole.
  1 region

  x 0.58 · y 0.58 · w 0.30 · h 0.20 (high)

Other

Studio product shot on a light gray seamless background with soft even lighting and a faint drop shadow under the shoe.

• BackgroundEven light gray seamless background filling the frame.
• ShadowSoft shadow directly beneath the sole aligned with the shoe, indicating studio lighting from above.
  1 region

  x 0.10 · y 0.80 · w 0.80 · h 0.08 (medium)
• Image crop and framingBoot centered horizontally in the lower half of the image with ample empty space above; entire outer side of the boot is visible.

Colors

matte black· upper smooth leathertextured black· suede panelstan leather· lining interior

02

Product

Rear-three-quarter view of a pair of black ankle hiking boots showing textured suede-like lower uppers, smooth leather collar and visible tan leather lining at the ankle; thick lug rubber soles and round patterned laces are visible.

• View and compositionPair of boots shown from rear three-quarter angle with heels closest to camera and toes pointing slightly right; both left and right boots visible.
  1 region

  x 0.08 · y 0.33 · w 0.84 · h 0.60 (high)
• Upper material - texturedLower portion of the uppers is a coarse, textured black material resembling rough suede or nubuck covering heel counter and quarter panels.
  2 regions

  x 0.06 · y 0.55 · w 0.56 · h 0.36 (high); x 0.40 · y 0.53 · w 0.48 · h 0.36 (high)
• Upper material - smooth collarSmooth black leather panel forms the ankle collar and wraps above the textured material, with a visible stitched seam where the two meet.
  2 regions

  x 0.18 · y 0.39 · w 0.46 · h 0.20 (high); x 0.49 · y 0.40 · w 0.34 · h 0.21 (high)
• Interior liningWarm tan leather lining visible inside the ankle and tongue openings of both boots.
  2 regions

  x 0.18 · y 0.37 · w 0.18 · h 0.18 (high); x 0.56 · y 0.37 · w 0.16 · h 0.18 (high)
• Laces and eyeletsBlack round laces with a fine white speckled pattern threaded through metal hardware and tied in loose loops above the tongue on both boots.
  2 regions

  x 0.32 · y 0.32 · w 0.28 · h 0.22 (high); x 0.60 · y 0.30 · w 0.32 · h 0.24 (high)
• Sole and outsoleThick black rubber lug sole with deep rectangular tread blocks and a stacked heel visible from the rear; welt stitching visible where sole meets upper.
  1 region

  x 0.06 · y 0.77 · w 0.88 · h 0.20 (high)
• Stitching detailVisible tonal stitching along heel seam and around the welt joining upper to sole.
  2 regions

  x 0.10 · y 0.58 · w 0.40 · h 0.35 (high); x 0.46 · y 0.58 · w 0.46 · h 0.35 (high)

Other

Studio shot on light gray seamless background with soft diffuse lighting and soft shadow under boots; image is sharp and centered on footwear.

• Background and lightingEven light gray seamless background with soft shadowing beneath the boots indicating diffuse studio lighting from above.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Shot compositionCropped composition includes both boots with rear and outer-side details emphasized; no props or packaging visible.
  1 region

  x 0.05 · y 0.30 · w 0.90 · h 0.65 (high)

Colors

matte black· textured lower uppersmooth black· smooth ankle collarwarm tan· interior liningrubber black· outsole and heel

03

Product

A pair of black low-ankle hiking boots shown from a slightly elevated front three-quarter view; visible details include smooth leather upper panels, textured rough-suede toe and side overlays, metal lace hardware, round patterned laces, raised lug soles, and padded collars.

• Overall silhouetteTwo matching boots shown as a pair, oriented with toes toward the camera and heels back, visible from a slightly elevated front three-quarter angle.
• Upper material - smooth leatherSmooth leather panels cover the vamp, tongue, and ankle collar area; the leather has a low-sheen finish and appears uniformly black.
  2 regions

  x 0.34 · y 0.20 · w 0.33 · h 0.36 (high); x 0.56 · y 0.18 · w 0.26 · h 0.34 (high)
• Overlay material - textured suede or rough nubuckTextured, rough-suede overlays cover the toe cap, lower side panels, and heel wrap; texture appears matte and slightly grainy compared with the smooth leather.
  2 regions

  x 0.11 · y 0.56 · w 0.44 · h 0.29 (high); x 0.53 · y 0.54 · w 0.36 · h 0.30 (high)
• Lace hardwareSilver-toned metal D-ring eyelets and speed-hook style hardware along the throat; hardware is shiny and reflective.
  2 regions

  x 0.23 · y 0.26 · w 0.28 · h 0.31 (high); x 0.58 · y 0.24 · w 0.20 · h 0.30 (high)
• LacesRound black laces with woven contrasting lighter flecks; laces are tied in a loose bow on the left shoe and looped on the right shoe with visible lace aglets.
  2 regions

  x 0.18 · y 0.22 · w 0.30 · h 0.30 (high); x 0.56 · y 0.20 · w 0.28 · h 0.34 (high)
• Sole and weltThick lug rubber outsoles with pronounced treads and a visible stitched welt joining the upper to the sole; sole is matte black.
  2 regions

  x 0.06 · y 0.76 · w 0.58 · h 0.18 (high); x 0.49 · y 0.72 · w 0.45 · h 0.21 (high)
• Padded collar and tonguePadded collar around the ankle and a cushioned tongue; padding visible as rounded, slightly raised sections at the top of each boot.
  2 regions

  x 0.14 · y 0.12 · w 0.20 · h 0.18 (high); x 0.60 · y 0.12 · w 0.16 · h 0.18 (high)
• Visible interior leather pullA small tan leather pull or lining tab is visible inside the left shoe at the top of the tongue.
  1 region

  x 0.29 · y 0.18 · w 0.04 · h 0.06 (medium)
• Stitching detailContrast stitching is visible along the welt and upper panel joins; stitches are tonal and follow component seams.
  1 region

  x 0.08 · y 0.72 · w 0.64 · h 0.12 (medium)

Other

Studio product shot on a neutral light-gray background with soft directional lighting from above-left producing subtle shadows beneath the shoes; image is centered and fully in focus.

• Background and surfaceUniform light-gray background and floor with no visible props or labels.
• Lighting and shadowSoft directional lighting from above-left creates mild highlights on leather and soft drop shadows under and to the right of each boot.
• Shot compositionSlightly elevated front three-quarter perspective showing both boots in full, with the left boot positioned slightly forward of the right.

Colors

black· smooth leather uppertextured black· textured suede overlaysblack with white flecks· lacessilver· metal eyelets and hookstan· visible interior pull tab