Quad Sole Pull-On Boot Rick Owens X Dr. Martens Men

Mid-calf pull-on boot in heavyweight nubuck leather, created as a Rick Owens x Dr. Martens collaboration with a chunky PVC Quad air-cushion sole and steel toe cap.

Heavyweight nubuck leather upper, leather lining, steel toe cap, adjustable snap-button calf tabs, padded footbed, slip-resistant PVC Quad sole with air cushions, signature yellow stitching, 5 cm platform.

Material

Heavyweight nubuck leather upper with leather lining, steel toe cap, and PVC Quad sole

Secondary

leather, metal, pvc

Style

edgy, gothic, grunge, punk, streetwear, minimal, biker

Occasion

everyday, casual, concert, festival, weekend

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Shoes

01

Product

Side view of a tall black pull-on boot with a chunky ridged platform sole, visible welt stitching in yellow and white, a top pull loop, and metal snap/grommet details at the shaft rim.

• Overall silhouetteTall shaft pull-on boot shown in strict side profile facing right, with a rounded toe and a high platform sole with pronounced lug tread.
  1 region

  x 0.03 · y 0.05 · w 0.94 · h 0.90 (high)
• Upper materialMatte black smooth leather (or leather-like) upper covering toe, vamp and shaft with visible single and double topstitching along panel joins.
  1 region

  x 0.06 · y 0.08 · w 0.63 · h 0.73 (high)
• Shaft top trim and hardwareNarrow strap-like trim around the shaft top with two metal eyelet/grommet rings and one larger snap-style metal button on the outer side near the rim.
  1 region

  x 0.07 · y 0.04 · w 0.32 · h 0.18 (high)
• Pull loopVertical woven pull loop emerging from the shaft rim; loop appears black with a lighter patterned underside and is folded back above the rim.
  1 region

  x 0.04 · y 0.00 · w 0.11 · h 0.14 (medium)
• Midfoot strap detailShort horizontal strap stitched over the instep area without visible fastener, forming a minimal decorative tab on the outer side.
  1 region

  x 0.42 · y 0.49 · w 0.20 · h 0.12 (high)
• Welt stitchingTwo visible rows of welt stitching above the midsole: an inner row in white and an outer row in bright yellow running around the perimeter above the sole.
  1 region

  x 0.03 · y 0.74 · w 0.92 · h 0.12 (high)
• Platform sole constructionThick ridged platform sole with horizontal grooved texture on the sidewall and deep lug tread on the outsole; sole color is a very dark muted gray-black.
  1 region

  x 0.02 · y 0.80 · w 0.95 · h 0.18 (high)
• Toe shapeRounded, smooth toe cap with uninterrupted leather surface and visible subtle sheen.
  1 region

  x 0.58 · y 0.52 · w 0.38 · h 0.29 (high)

Other

Studio product shot on a neutral light gray seamless background with soft, even lighting and minimal shadow under the sole.

• Background and stagingLight neutral gray seamless backdrop filling the frame with the boot centered left-of-center and no props.
• Lighting and shadowSoft diffuse lighting from the front-left producing gentle highlights on the leather and a faint soft shadow beneath the sole toward the lower frame.
• Image framingBoot shown fully within frame from near top of shaft to sole edge, slight crop at the very top of the pull loop but entire boot profile visible.

Colors

matte black· upperblack with beige pattern (uncertain)· pull loopbright yellow· welt stitching outer rowwhite· welt stitching inner rowcharcoal black· sole sidewall and outsole

02

Product

Rear view of two tall black pull-on boots with chunky ridged platform soles, visible pull tabs at the shaft tops, decorative strap and metal rivets near the top, and contrasting welt stitching where the upper meets the sole.

• Overall silhouettePair of tall pull-on boots shown from the rear with straight cylindrical shafts and rounded heels; both boots are positioned side by side showing the back and outer-quarter sides.
  1 region

  x 0.04 · y 0.06 · w 0.92 · h 0.88 (high)
• Upper material and finishUpper appears to be smooth matte black leather or leather-like material with visible single- and double-row topstitching following panel seams.
  1 region

  x 0.08 · y 0.12 · w 0.64 · h 0.71 (high)
• Top pull tabsWebbing pull tabs extend above each shaft; tabs are black with vertical light-colored printed text and are folded in a loop.
  2 regions

  x 0.10 · y 0.01 · w 0.16 · h 0.18 (high); x 0.58 · y 0.00 · w 0.18 · h 0.20 (high)
• Printed pull-tab text“WITH SOLES Bounce”
  1 region

  x 0.10 · y 0.01 · w 0.16 · h 0.18 (medium)
• Decorative strap and studsA horizontal leather strap wraps the top of the shaft on each boot and is secured with visible round metal studs or rivets; one strap end on the right boot is fastened with three visible studs.
  2 regions

  x 0.06 · y 0.06 · w 0.38 · h 0.16 (high); x 0.52 · y 0.04 · w 0.36 · h 0.18 (high)
• Panel stitch detailsVisible vertical and curved panel seams on the rear and outer side of each shaft with neatly sewn topstitching reinforcing panel joins.
  2 regions

  x 0.12 · y 0.18 · w 0.30 · h 0.62 (high); x 0.49 · y 0.18 · w 0.35 · h 0.64 (high)
• Quad platform sole profileThick multi-layered ridged platform sole with deep horizontal ribs on the outer sidewall and a pronounced raised tread at the bottom edge.
  2 regions

  x 0.04 · y 0.70 · w 0.44 · h 0.26 (high); x 0.48 · y 0.72 · w 0.48 · h 0.24 (high)
• Welt stitchingContrasting rows of welt stitching visible where the upper meets the sole: a prominent yellow stitch running above a white stitch that both encircle the sole.
  1 region

  x 0.04 · y 0.72 · w 0.92 · h 0.12 (high)
• Heel and outsole treadRear heel area shows textured tread notches and a stepped heel profile integrated into the platform.
  2 regions

  x 0.04 · y 0.78 · w 0.44 · h 0.18 (high); x 0.52 · y 0.80 · w 0.40 · h 0.16 (high)

Other

Studio product shot on a light gray seamless background with soft directional lighting producing faint shadows under the soles; image is cropped to show rear portions of both boots.

• BackgroundUniform light gray seamless background covering the entire frame.
• Lighting and shadowSoft studio lighting from above and slightly front-left producing minimal specular highlights on the leather and soft diffuse shadows beneath the soles.
• Shot compositionCropped rear-quarter studio composition showing only the lower portion and shafts of both boots, centered horizontally with negative space at top.

Colors

matte black· upperbright yellow· welt stitching (primary)white· welt stitching (secondary)dark olive black· sole sidewall

03

Product

Pair of tall black pull-on boots shown from a three-quarter front angle; thick ridged platform soles with visible yellow welt stitching; fabric pull tabs at the shaft top and snap hardware on one shaft.

• Overall shapeTwo tall shaft pull-on boots with a rounded toe box, straight vertical shaft, and substantial lugged platform sole; left boot shown slightly behind and to the left of the right boot.
  1 region

  x 0.02 · y 0.06 · w 0.96 · h 0.88 (medium)
• Upper material and finishSmooth matte black leather or leatherlike upper with visible stitch lines around shaft top, toe apron and panel edges.
  2 regions

  x 0.08 · y 0.14 · w 0.60 · h 0.66 (high); x 0.48 · y 0.18 · w 0.42 · h 0.66 (high)
• Pull tabsBlack woven fabric pull tabs at the back/top of each shaft, looped and extending above the shaft rim.
  2 regions

  x 0.24 · y 0.02 · w 0.12 · h 0.16 (high); x 0.70 · y 0.00 · w 0.12 · h 0.16 (high)
• Pull tab text“AirWair”
  2 regions

  x 0.69 · y 0.00 · w 0.12 · h 0.10 (medium); x 0.24 · y 0.02 · w 0.12 · h 0.10 (medium)
• Sole constructionThick multi-layered platform sole with deep lug tread and a ribbed vertical sidewall texture.
  1 region

  x 0.06 · y 0.64 · w 0.88 · h 0.30 (high)
• Welt stitchingContrasting yellow welt stitch running around the perimeter where upper meets sole; an additional white stitch row is visible just inside the yellow.
  1 region

  x 0.08 · y 0.68 · w 0.84 · h 0.18 (high)
• Snap hardwareTwo silver metal snap studs attached near the top outer side of the right shaft.
  1 region

  x 0.79 · y 0.10 · w 0.08 · h 0.06 (high)
• Front strap detailHorizontal stitched strap/panel across the vamp area above the toe on each boot forming a rectangular apron-like panel.
  2 regions

  x 0.10 · y 0.44 · w 0.40 · h 0.16 (high); x 0.52 · y 0.46 · w 0.36 · h 0.18 (high)

Other

Studio product shot with even diffuse lighting on a pale gray seamless background; soft shadows beneath the soles; image framed to show both boots in full with slight perspective.

• Background and surfaceUniform light gray seamless background and surface with faint shadowing under the boots.
• Shot compositionThree-quarter front perspective with the right boot positioned slightly forward and rotated to show outer side and toe; left boot angled to show outer side and inner shaft.
• Lighting and reflectionsSoft, even studio lighting; subtle matte highlights on shaft and toe surfaces without harsh specular glare.

Colors

matte black· upperblack (woven)· pull tabsyellow stitching· welt stitchingdark smoke· midsole and treadpolished silver· snap hardware