Foldable Card Holder

Luxurious cowhide leather card holder with multiple card slits, flap closure, and embossed signature logo. Made in Japan.

Multiple slits for cards; flap closure; embossed signature logo; made in Japan; presented in a designer box; soft and luxurious cowhide leather; discretely fits into your pocket.

Material

Soft and luxurious cowhide leather

Style

minimal, classic, modern

Occasion

everyday, travel, work, gift

Gender

male

Age Group

adult

Condition

new

Category

Luggage & Bags

01

Product

A rectangular black foldable card holder shown front-facing with smooth leather-like finish, stitched edges, and a small white signature logo near the lower center of the front face.

• Overall shapeRectangular, horizontally oriented foldable card holder with rounded corners on the bottom and slightly rounded top edge visible.
  1 region

  x 0.06 · y 0.38 · w 0.88 · h 0.50 (high)
• Material and finishSmooth, slightly lustrous leather-like surface on the exterior front panel with a fine grain visible in highlight areas.
  1 region

  x 0.12 · y 0.42 · w 0.76 · h 0.30 (high)
• Edge stitchingSingle line of visible stitching follows the outer perimeter of the front panel, most visible along the left, right and bottom edges.
  1 region

  x 0.06 · y 0.38 · w 0.88 · h 0.50 (high)
• Signature logoSmall white signature-style logo printed near the lower center of the front face.
  1 region

  x 0.42 · y 0.72 · w 0.16 · h 0.08 (high)
• Front logo text“Yohji Yamamoto”
  1 region

  x 0.42 · y 0.72 · w 0.16 · h 0.08 (high)

Other

Studio shot on a light gray background with soft shadow beneath the product; product centered and cropped with generous top margin.

• Background and stagingUniform light gray background filling the frame, providing neutral contrast with the black product.
• ShadowSoft diffuse shadow directly under the card holder indicating overhead front lighting.
  1 region

  x 0.18 · y 0.86 · w 0.64 · h 0.06 (medium)
• Shot compositionProduct is centered horizontally and positioned in the lower half of the image with a large empty margin above.

Colors

black· front panelwhite· signature logo

02

Product

Front-facing rectangular black foldable card holder made of smooth leather with a curved top exterior slip pocket and visible edge stitching.

• Overall shapeRectangular horizontal card holder with slightly rounded bottom corners and a folded top edge.
  1 region

  x 0.08 · y 0.36 · w 0.84 · h 0.36 (high)
• Exterior slip pocketSingle exterior card slot across the upper portion with a smooth curved top opening that creates a crescent-shaped cutline.
  1 region

  x 0.09 · y 0.30 · w 0.82 · h 0.18 (high)
• Material finish contrastMain body has a matte, smooth leather appearance while the folded top edge and the pocket trim have a slightly glossier finish and subtle reflection.
  2 regions

  x 0.08 · y 0.36 · w 0.84 · h 0.12 (medium); x 0.08 · y 0.48 · w 0.84 · h 0.24 (medium)
• Edge stitchingVisible single-line topstitched seam running along the left, right and bottom edges, and a short vertical stitch at each top corner near the fold.
  1 region

  x 0.08 · y 0.36 · w 0.84 · h 0.36 (high)
• Bottom edge profileBottom edge sits on a soft shadow suggesting a flat base; the lower edge stitching is visible and the corners are rounded.
  1 region

  x 0.08 · y 0.64 · w 0.84 · h 0.06 (high)

Other

Studio product shot centered on a uniform light gray background with soft frontal lighting and a subtle cast shadow beneath the item.

• Shot compositionProduct centered horizontally and positioned in the lower half of the frame showing a straight-on front view.
• BackgroundPlain uniform light gray background filling the frame.
• Lighting and shadowEven soft lighting from front with a small diffuse shadow under the product and mild highlight along the glossy top trim.
  1 region

  x 0.18 · y 0.72 · w 0.64 · h 0.06 (medium)

Colors

matte black· main bodygloss black· top fold and pocket trim

03

Product

Black foldable card holder shown open, revealing multiple horizontal card slots and smooth leather interior with visible topstitching along panels and edges.

• Overall shapeFoldable rectangular card holder shown open at roughly 90 degrees with two visible flat panels joined by a stitched spine.
  1 region

  x 0.06 · y 0.08 · w 0.88 · h 0.84 (medium)
• Material and finishSmooth leather finish with a low sheen; surfaces show slight reflection indicating polished leather.
  1 region

  x 0.18 · y 0.42 · w 0.68 · h 0.42 (high)
• Card slotsTwo horizontal card slots visible on the lower panel: one outer slot with a curved top edge and a second slot opening above it toward the central fold.
  1 region

  x 0.06 · y 0.52 · w 0.78 · h 0.35 (high)
• Stitching detailSingle-line topstitching in matching dark thread runs along the outer edges of panels and across the slot openings.
  1 region

  x 0.12 · y 0.10 · w 0.75 · h 0.72 (high)
• Spine and foldNarrow stitched spine at the center connecting the two panels; fold area shows slightly softer leather with a subtle crease line.
  1 region

  x 0.46 · y 0.10 · w 0.12 · h 0.80 (medium)
• Edge finishingEdges are finished and slightly rounded with visible painted edge coating matching the leather color.
  2 regions

  x 0.06 · y 0.52 · w 0.30 · h 0.35 (medium); x 0.72 · y 0.06 · w 0.22 · h 0.28 (medium)

Other

Studio-style product shot on a pale gray background with soft shadowing; image composed at an oblique top-down angle focusing on the interior of the open card holder.

• Background and surfaceUniform light gray background with a soft shadow under the product indicating directional top-left lighting.
• Shot compositionOblique top-down three-quarter view showing the interior panels and card slots; lower-left corner of the product is nearest the viewer.
• Lighting and reflectionsSoft diffuse lighting producing gentle highlights on the leather surfaces and subtle shadow beneath the open panel.

Colors

deep black· outer and inner leather panels#0C0E0Ematte black· stitched edge and thread#0E1112