BALLY
Three Stripes Large Tote
The Three Stripes Large Tote from Bally is a canvas tote bag with a minimalist design featuring contrasting stripes. It is intended for everyday use, with adjustable shoulder straps for over-the-shoulder wear, a small interior zip pocket, and a structured base. Made from rugged fabric, the bag measures 20 inches long, 8.75 inches wide, and 15.25 inches high.
- Material
- Canvas
- Style
- minimalist, casual
- Category
- Luggage & Bags > Shopping Totes
Color
Size
Specifications
Relaxed tote bag with minimalist design and robust canvas with contrasting stripes. Adjustable handles and small zip pocket inside.
Adjustable handles, small zip pocket inside.
- Material
- Canvas
- Style
- minimalist, casual
- Occasion
- everyday
- Gender
- male
- Age Group
- adult
- Condition
- new
- Dimensions
- 20x8.75x15.25 in
- Category
- Luggage & Bags > Shopping Totes
Additional Attributes
- rugged fabric
- adjustable handles to wear over the shoulder
- small zip pocket inside
Product Insights
The Three Stripes Large Tote by BALLY (850 CAD, in stock) blends quiet luxury with sportswear heritage: its vertical two-tone stripe, a revival of a 1970s signature, replaces overt branding, while a full leather interior elevates value but introduces fragility—the lining can shrink, stiffen, or bleed dye if soaked, demanding spot-cleaning, careful conditioning, upright storage, and preventive beeswax-based water repellent applied only to canvas with all leather masked, alongside a wax-free conditioner on trim, using a top zip closure to shield contents and lining from water, though submersion still causes damage.
Verified claims
- Design heritage
- The stripe is a Bally signature from 1970s sportswear, revived over decades.
- Branding style
- The tote uses the stripe as its main brand marker, with no visible monogram.
- Stripe branding
- The vertical two-tone stripe is the primary brand marker, replacing an overt logo.
- Leather lining
- Full leather interior embodies quiet luxury and offers value seen in pricier totes.
- Care
- Submersion damages interior; spot-clean, condition carefully, store upright.
- Zip closure
- Top zip closure secures contents and protects leather lining from water.
- Drying protocol
- Blot wet canvas and air-dry stuffed with paper towels, and avoid artificial heat.
- Lining vulnerability
- The interior leather lining can shrink, stiffen, or bleed dye if soaked.
- Preventive treatment
- Apply beeswax-based water repellent to canvas for rain protection.
- Protectant type
- Use a non-silicone, beeswax-based water repellent; avoid solvent-based or silicone sprays.
- Leather protection
- Before spraying, mask all leather trim with plastic and painter's tape; keep protectant off interior leather lining.
- Leather conditioning
- Condition the leather trim with a wax-free conditioner, masking the canvas to prevent permanent stains.
Product record
- Title
- Three Stripes Large Tote
- Brand
- BALLY
- Price
- 850 CAD
- Availability
- In stock
Image Analysis
3 images- 01
Product
Front-facing large rectangular tote with two shoulder straps, a central vertical two-tone stripe and a small rectangular label above the stripe.
- Overall shapeRectangular tote body with a slightly trapezoidal silhouette (wider at top) and a flat reinforced base panel visible along the bottom edge.
1 region
x 0.06 · y 0.32 · w 0.88 · h 0.46 (high) - Material and finishSmooth, tightly woven fabric on main body with a matte finish; base panel appears slightly firmer and structured.
1 region
x 0.08 · y 0.50 · w 0.84 · h 0.20 (medium) - HandlesTwo flat woven shoulder straps emerging from the top edge; straps form a loop rising above the bag and attach at top seam.
1 region
x 0.28 · y 0.08 · w 0.44 · h 0.38 (high) - Adjustable strap detailRight-side strap includes a short vertical extension with a rectangular metal buckle/adjuster near the top edge.
1 region
x 0.64 · y 0.24 · w 0.12 · h 0.18 (high) - Central stripeSingle vertical ribbon-like panel down the center consisting of a burgundy outer band on each side and a narrower off-white stripe in the middle.
1 region
x 0.47 · y 0.36 · w 0.06 · h 0.34 (high) - Brand label“Small rectangular black label sewn at top of the central stripe with white capital letters.”
1 region
x 0.48 · y 0.35 · w 0.04 · h 0.03 (high) - Label text transcription“BALLY”
1 region
x 0.48 · y 0.35 · w 0.04 · h 0.03 (high)
Other
Product centered on a neutral light gray studio background with soft shadow beneath; image is cropped to show tote and straps with even, front-facing lighting.
- Background and stagingEven light gray seamless background with no visible props.
- ShadowSoft diffuse shadow directly beneath the bag indicating studio lighting and the bag resting on a flat surface.
1 region
x 0.06 · y 0.74 · w 0.88 · h 0.12 (high) - Shot compositionCentered, straight-on frontal view showing the full front face of the tote and both straps; minimal perspective distortion.
Colors
black· main body#0E0E0Eblack· straps#141314burgundy· center stripe outer bands#7B1C24off-white· center stripe middle bandwhite· label text#EDEDED- Overall shapeRectangular tote body with a slightly trapezoidal silhouette (wider at top) and a flat reinforced base panel visible along the bottom edge.
- 02
Product
Close-up side view of the tote's lower-left panel showing body fabric, reinforced triangular corner, vertical seam, top band and a woven shoulder strap with a metal rectangular buckle.
- Main body panelLarge slightly textured black fabric panel with a smooth matte finish occupying most of the visible side of the tote.
1 region
x 0.14 · y 0.14 · w 0.72 · h 0.73 (high) - Reinforced triangular cornerDiagonal triangular reinforcement at the bottom-left corner formed from the same black fabric, stitched along its edges to the base panel.
1 region
x 0.05 · y 0.73 · w 0.34 · h 0.24 (high) - Vertical side seamSingle vertical seam with visible topstitching runs up the left side of the bag, connecting the front panel to the side gusset.
1 region
x 0.09 · y 0.12 · w 0.06 · h 0.64 (high) - Bottom edge bandHorizontal stitched band along the base of the bag where the side panel meets the bottom, visible as a thin seam line.
1 region
x 0.12 · y 0.86 · w 0.80 · h 0.12 (high) - Top rim and folded bandTop edge folded into a narrow stitched rim or band that runs along the opening of the tote, slightly rounded at the corner.
1 region
x 0.12 · y 0.06 · w 0.58 · h 0.12 (high) - Woven shoulder strapWide black woven strap with visible diagonal weave texture that extends down into the frame from the top right area.
1 region
x 0.64 · y 0.02 · w 0.34 · h 0.38 (high) - Metal rectangular buckleSmall polished metal rectangular buckle attached to a narrow strap near the top rim, showing a metallic sheen.
1 region
x 0.45 · y 0.01 · w 0.12 · h 0.07 (medium)
Other
Studio shot of the tote on a neutral light gray background with soft diffuse lighting and a subtle shadow under the bag; image is cropped to show the lower-left side and top-right strap area.
- Background and lightingEven light gray studio background with soft, diffuse lighting and no visible texture.
- ShadowSoft shadow visible beneath the bag toward the lower-right, indicating top-left lighting.
1 region
x 0.48 · y 0.86 · w 0.48 · h 0.12 (medium) - Shot compositionFramed close-up of the bag's side and lower corner; top and right edges of the bag are cropped by the image.
Colors
matte black· main body panel#0E0E0Dblack (reinforced trim)· reinforced triangular corner and base band#0E0E0Eblack (woven strap)· woven shoulder strap#0E0E0Epolished silver· metal buckle- Main body panelLarge slightly textured black fabric panel with a smooth matte finish occupying most of the visible side of the tote.
- 03
Product
Interior view of a black tote showing an internal zip pocket with a leather zipper pull, stitched rectangular leather logo patch reading 'BALLY', and woven shoulder strap with metal rectangular ring.
- Interior zip pocketHorizontal zippered pocket set into the tote lining near the top opening, with a visible zipper track and stitched pocket perimeter.
1 region
x 0.20 · y 0.20 · w 0.59 · h 0.31 (high) - Zipper pullBlack leather tab zipper pull attached to the metal zipper slider; pull is rounded at the end and stitched.
1 region
x 0.40 · y 0.28 · w 0.07 · h 0.08 (high) - Leather logo patch“Small rectangular leather patch stitched to the pocket face with debossed or printed uppercase text reading 'BALLY'.”
1 region
x 0.45 · y 0.33 · w 0.08 · h 0.05 (high) - Woven shoulder strapWide black woven strap emerging into frame with visible horizontal ribbing and folded stitched end.
1 region
x 0.06 · y 0.66 · w 0.43 · h 0.32 (high) - Metal rectangular ringPolished metal rectangular ring connecting the strap to the bag, visible at the strap end with reflective highlights.
1 region
x 0.18 · y 0.67 · w 0.14 · h 0.12 (high) - Top rim and internal seamsUpper rim of the tote shows a stitched folded edge and vertical internal seam bindings on either side of the zip pocket.
1 region
x 0.12 · y 0.08 · w 0.76 · h 0.18 (high)
Other
Close-up product detail shot with neutral light grey background, soft diffuse lighting, and small soft shadowing; image cropped to show upper interior and strap detail.
- Shot compositionTight close-up framing focused on the tote interior and strap; edges of the bag are cropped by the image border.
- BackgroundPlain light grey background filling the upper portion of the image behind the bag.
1 region
x 0.00 · y 0.00 · w 1.00 · h 0.22 (high) - Lighting and reflectionEven diffuse lighting with minor reflections on the metal ring and subtle highlights on the fabric surfaces.
Colors
deep black· main fabric lining and exterior visible#0E0E0Epolished silver· metal hardware- Interior zip pocketHorizontal zippered pocket set into the tote lining near the top opening, with a visible zipper track and stitched pocket perimeter.