BOSS
Embossed Monogram Card Holder
The BOSS Embossed Monogram Card Holder is a slim, rectangular wallet made of black regenerated leather with an embossed diagonal micro-pattern, edge stitching, and a small silver BOSS logo. It is designed to organize and carry cards and bills in multiple slots and includes RFID technology to help protect against card skimming. Dimensions are 8 cm (3.25 in) in height by 10 cm (4 in) in width.
- Material
- Regenerated leather
- Gender
- unisex
- Style
- minimal, classic, modern
- Category
- Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips
Specifications
Compact BOSS card holder in regenerated leather with embossed monogram and RFID protection.
Regenerated leather, multiple slots for cards and bills, RFID technology for protection against card skimming.
- Material
- Regenerated leather
- Style
- minimal, classic, modern
- Occasion
- everyday, work
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips
Additional Attributes
- embossed monogram detail
- regenerated leather construction
- multiple slots for cards and bills
- RFID technology for protection against card skimming
- compact 8 cm height and 10 cm width
- slim card holder silhouette
- BOSS at Le 31 branded design
Product Insights
Embossed Monogram Card Holder 8 cm high x 10 cm wide (about 3.25 x 4 inches) Five card slots, with no separate bill or coin compartment RFID technology is designed to block card skimming while cards are inside Slimness comes at the cost of capacity and organization 99 CAD buys the BOSS name, RFID and a compact design, with material longevity caveats
Verified claims
- category
- Men's card holder in the wallets and money clips category
- dimensions
- 8 cm high x 10 cm wide (about 3.25 x 4 inches)
- capacity
- Five card slots, with no separate bill or coin compartment
- pocket fit
- Compact enough for front trouser pocket carry
- load behavior
- Stays flatter with four or fewer cards and can bow when overstuffed
- material
- 100% bonded/regenerated leather shell with 100% polyester lining
- breathability
- Less breathable than genuine leather
- durability
- Bonded leather can peel, crack or flake, and is usually not repairable like natural hide
- maintenance
- No explicit care instructions are supplied; avoid prolonged heat, damp storage and harsh chemicals
- surface construction
- Embossed monogram pattern is part of the material, not a printed foil
- construction details
- Edge stitching and three visible horizontal card-slot seams
- RFID protection
- RFID technology is designed to block card skimming while cards are inside
- RFID limits
- RFID protection may not cover older 125 kHz building-access cards; transit passes usually will not work inside
- RFID check
- A payment reader can be used to check whether the holder blocks a contactless card
- styling
- Black embossed monogram with a small silver BOSS logo
- variant
- One size and one color: Black
- use cases
- Best for a few cards plus folded cash, not coins or receipts
- tradeoffs
- Slimness comes at the cost of capacity and organization
- value
- 99 CAD buys the BOSS name, RFID and a compact design, with material longevity caveats
- comparison
- Flatter and smaller than a bifold, but less breathable and repairable than genuine leather
Product record
- Title
- Embossed Monogram Card Holder
- Brand
- BOSS
- Price
- 99 CAD
- Availability
- In stock
Buying Guide
1 comparison · 9 sourcesUses
Carrying cards and bills in a slim card holder
This BOSS card holder gives you multiple slots to keep cards and bills together in one compact piece. The front features horizontal card slots and a small silver BOSS logo near the lower edge.[1,2]
Keeping everyday cards shielded from skimming
Carry your tap-to-pay and bank cards in this BOSS monogram card holder when you're out and about. It's designed with RFID technology intended to protect against card skimming.[1]
Product comparison
Compared within this brand.
| Embossed Monogram Card Holder: Choose this if you want a slim, flat black card holder with an embossed diamond-pattern monogram finish and a small silver BOSS badge on the front. It offers three visible front slots — two narrow slots plus a larger pocket — with additional slots for cards and bills, and includes RFID technology intended to help protect against card skimming. At about 10 cm wide by 8 cm tall and sold in one size, it is made of 100% bonded (regenerated) leather with a polyester lining, so it is not full-grain leather.[1,2,3,4] | Northon Regenerated Leather Card Holder: Choose this if you want a slim black card holder with RFID technology described as protecting against card skimming, plus three horizontal card slots and room for bills in a compact 3 inches by 4 inches (8 cm by 10 cm) flat rectangular profile. It is made of textured regenerated leather (100% bonded leather with a 100% polyester lining) with single-line topstitched edges and a small raised silver BOSS logo near the lower front, and comes in one size with a signature storage case included.[5,6] | Zair Faux-Leather Card Holder: Choose this if you want a slim, landscape-format card holder that holds cards and bills in multiple slits while staying compact — it measures 4 inches by 2.75 inches, comes in one size, and is offered in Black and Chocolate/Espresso. It features visible topstitching, a small tricolour fabric pull tab, and arrives in a designer box, making it gift-ready. Note that the listing is inconsistent about the material, describing it as faux leather while the composition specifies a 100% leather shell with 100% polyester lining, so verify the finish if that matters to you.[7,8,9] |
Image Analysis
2 images- 01
Product
Front-facing rectangular card holder made of black textured material with horizontal card slot seams and a small centered silver 'BOSS' logo near the lower edge.
- Overall shapeFlat rectangular card holder shown face-on with short vertical edges and longer horizontal edges; proportions typical of a slim card holder.
1 region
x 0.06 · y 0.18 · w 0.88 · h 0.60 (high) - Surface textureUniform embossed repeating small diamond or diagonal grid pattern covering the entire visible surface.
1 region
x 0.08 · y 0.20 · w 0.84 · h 0.54 (high) - Card slot seamsThree horizontal stitched seams near the top half indicating multiple card slots; seams run nearly the full width and are slightly raised and glossy.
1 region
x 0.08 · y 0.20 · w 0.84 · h 0.25 (high) - Edge stitchingVisible narrow stitching along left, right and top edges matching the holder color, forming a neat border.
1 region
x 0.06 · y 0.18 · w 0.88 · h 0.60 (medium) - Metal logo“Small metallic silver embossed or applied badge reading BOSS centered near the bottom edge of the front face.”
1 region
x 0.44 · y 0.62 · w 0.12 · h 0.06 (high)
Other
Product photographed on a plain light gray background with soft shadow beneath; centered composition and even studio lighting.
- BackgroundSmooth uniform light gray backdrop occupying full image behind the product.
- ShadowSoft drop shadow below and slightly to the right of the card holder providing subtle lift from the surface.
1 region
x 0.20 · y 0.72 · w 0.60 · h 0.12 (medium) - Shot compositionCentered frontal studio product shot with even, diffuse lighting and no visible props or packaging.
Colors
black· main bodysilver· logo- Overall shapeFlat rectangular card holder shown face-on with short vertical edges and longer horizontal edges; proportions typical of a slim card holder.
- 02
Product
Front-facing rectangular black card holder with a uniform diagonal embossed micro-pattern, three visible horizontal card slots, and visible edge stitching.
- Overall shapeRectangular, flat card holder viewed straight on with the long side horizontal and narrow top-to-bottom profile.
1 region
x 0.06 · y 0.28 · w 0.88 · h 0.46 (high) - Card slot layoutThree horizontal card slot openings are visible on the front: two narrow slots near the top edge and a larger pocket opening below them.
1 region
x 0.12 · y 0.30 · w 0.76 · h 0.16 (high) - Surface textureUniform diagonal embossed micro-pattern composed of small diamond or lozenge shapes repeated across the surface.
1 region
x 0.08 · y 0.32 · w 0.84 · h 0.36 (high) - Material finishSlightly glossy leather-like finish that reflects light on raised areas of the embossing.
1 region
x 0.08 · y 0.32 · w 0.84 · h 0.36 (medium) - Edge and stitchingNarrow stitched border runs along the top, sides, and bottom edges with visible stitch lines matching the holder outline.
1 region
x 0.06 · y 0.28 · w 0.88 · h 0.46 (high) - Lower shadow and base contactSubtle drop shadow at the bottom edge indicating the holder sits on a light surface.
1 region
x 0.22 · y 0.70 · w 0.56 · h 0.08 (high)
Other
Product centered on a uniform light gray background with frontal, level camera angle and soft even lighting.
- Shot compositionCard holder centered in frame, photographed straight on with the product occupying the middle horizontal band of the image.
- BackgroundSolid light gray background with even tone and no visible props.
- LightingSoft, even lighting producing mild highlights on embossed raised areas and minimal harsh shadows.
Colors
black· main body- Overall shapeRectangular, flat card holder viewed straight on with the long side horizontal and narrow top-to-bottom profile.
Brand PDP Lookup
- Brand
- BOSS
BOSS - Monogram card holder with foil-embossed logo - Black