
ORI Muskoka
Angular Outdoor Footrest
This Angular Outdoor Footrest is a low-profile, origami-inspired outdoor furniture piece designed to pair with a matching Adirondack chair. It is constructed from UV-resistant HDPE plastic, making it durable for prolonged outdoor use, and includes assembly instructions and hardware. The footrest measures 22 x 20 x 16 inches (56 x 51 x 41 cm), is handmade in Toronto, and each piece may vary slightly from the photo.
- Material
- HDPE (high-density polyethylene) plastic
- Category
- Furniture > Outdoor Furniture > Outdoor Ottomans
Color
Size
Specifications
Outdoor footrest made from HDPE plastic, designed to complement an Adirondack chair, with a futuristic origami-inspired design.
UV resistant, durable HDPE frame, assembly instructions included, made in Toronto, suitable for outdoor use
- Material
- HDPE (high-density polyethylene) plastic
- Occasion
- everyday, casual
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 22x20x16 in
- Category
- Furniture > Outdoor Furniture > Outdoor Ottomans
Additional Attributes
- handmade upon request
- HDPE plastic
- UV resistant
- assembly instructions included
- made in Toronto
- unique piece
- outdoor use
- complements Adirondack chair
- futuristic design
- origami-inspired
Product Insights
The Angular Outdoor Footrest from ORI Muskoka is a durable, low-maintenance ottoman designed exclusively for the ORI Muskoka chair, trading broad compatibility for optimized fit. Its black HDPE surface reaches 110–125°F on hot days but cools within 30–60 seconds; lighter variants stay cooler. The material resists chemicals, moisture, UV, and cold-cracking without painting or staining, stays ductile below -40°C, prevents freeze-thaw cracking due to under 0.01% water absorption, and blocks UV with carbon black for decades of color stability. It resists mold, stains from pool chemicals, sap, and de-icing salt, and cleans with soap and water—avoid abrasive pads to preserve the matte finish.
Verified claims
- Chair compatibility
- Designed exclusively for the ORI Muskoka chair; compatibility with other chairs not guaranteed.
- Heat comfort
- Black HDPE surface reaches 110–125°F on a 90°F day but cools within 30–60 seconds.
- Care
- No painting, staining, or sealing needed; clean with soap and water.
- Weather resilience
- Resists chemicals, moisture, UV, and cold-cracking without extra care.
- Freeze-thaw durability
- Water absorption under 0.01% prevents freeze-thaw cracking.
- Cold impact resistance
- HDPE remains ductile at -40°C, preventing brittle fracture in cold snaps.
- UV resistance
- Carbon black blocks UV, preventing surface chalking and structural decay.
- Cold impact resilience
- HDPE frame stays impact-resistant below -40°C without brittle fracture.
- Color stability
- Integral carbon black stops UV fading, chalking and stains for decades
- Heat reflection
- Lighter color variants stay cooler in direct sun
- Mold resistance
- HDPE construction prevents mold and mildew buildup.
- Stain resistance
- Won't stain from pool chemicals, sap, or de-icing salt.
- Cleaning
- Cleans with soap and water; avoid abrasive pads to preserve matte finish.
Product record
- Title
- Angular Outdoor Footrest
- Brand
- ORI Muskoka
- Price
- 395 CAD
- Availability
- In stock
Deep Research
How HDPE holds up in Canadian weather
- The polymer is inert to chlorides, acids, and alkalis, so whether spattered by pool chemicals, de-icing salt, or acidic tree sap, the surface won't stain, pit, or degrade — a direct advantage over salt-sensitive metals and absorbent woods.
- With a water absorption rate under 0.01% by ASTM D570, the HDPE frame is practically impervious to moisture; melting snow and ice cannot infiltrate, so the repeated freeze-thaw cycles that crack wood furniture and delaminate composites have no effect.
- Because HDPE is non-porous and hydrophobic, it denies mold, mildew, and algae a foothold — the footrest will never develop the green film or black spots that plague wood, textile, and even powder-coated metal outdoor pieces in humid or shaded spots.
- The deep black color is not a coating but fully compounded pigment that doubles as a UV absorber; together with embedded light stabilizers, it prevents chalking and structural degradation for a service life measured in decades, even under full northern sun.
- HDPE retains ductile impact resistance well below -40°C, so a sharp strike — like knocking the footrest over on an icy deck — won't cause the catastrophic brittle fracture common in PVC, polypropylene, or painted aluminum during a Canadian cold snap.
Image Analysis
3 images- 01

Product
Low, angular footrest with a three-panel slanted top and A-frame side legs finished in a dark matte grey. Top panels have narrow gaps between them and visible beveled edges.
- Overall shapeLow rectangular footprint with a slanted three-panel top and two triangular A-frame side legs forming the support.
1 region
x 0.18 · y 0.34 · w 0.64 · h 0.47 (high) - Top panelsThree flat, trapezoidal top slats meeting toward the front center with narrow gaps between adjacent slats and angled beveled front edges.
1 region
x 0.32 · y 0.38 · w 0.45 · h 0.25 (high) - Side legsA-frame side panels cut to form a triangular leg profile with an inward notch at the top where the top panels rest.
2 regions
x 0.18 · y 0.52 · w 0.28 · h 0.37 (high); x 0.54 · y 0.52 · w 0.28 · h 0.37 (high) - Material finishOpaque, low-sheen matte surface consistent across top panels and legs; surface texture appears smooth without visible wood grain.
- Assembly detailTop panels appear mounted into notches on the side legs with narrow uniform seams; no visible fasteners on exposed surfaces.
- Visible wear or marksNo scratches, dents, or stains visible on the product surfaces in this image.
Other
Indoor staged scene on a woven rug near a fireplace with a matching chair partially visible and an outdoor lawn seen through an opening; warm directional lighting casts shadows from the footrest.
- Shot compositionThree-quarter front view of the footrest placed on a textured woven rug, photographed at a slightly elevated angle.
- Background elementsPartial view of a matching chair on the left, a fireplace with stacked logs on the right, and a grassy outdoor area visible through an opening in the upper left.
2 regions
x 0.02 · y 0.02 · w 0.38 · h 0.30 (medium); x 0.68 · y 0.06 · w 0.30 · h 0.30 (medium) - Lighting and shadowWarm directional light from upper left creates a distinct shadow of the footrest on the rug toward the lower right.
- Surface under productBrown woven rug with a subtle striped pattern under the footrest.
1 region
x 0.12 · y 0.60 · w 0.76 · h 0.35 (high)
Colors
dark charcoal grey· top panels#1B1512dark charcoal grey· side legs#36302B- Overall shapeLow rectangular footprint with a slanted three-panel top and two triangular A-frame side legs forming the support.
- 02

Product
Low, angular footrest with two inward-sloping top panels, four triangular slanted legs and a continuous matte dark gray finish, shown from an oblique side angle.
- Overall shapeRectangular low-profile footrest with a two-panel top separated by a shallow central valley and a small upward notch at the top center; top panels slope inward toward the center.
1 region
x 0.18 · y 0.48 · w 0.64 · h 0.21 (high) - Leg geometryFour outward-leaning triangular legs with a wide top and tapered lower edge; each outer face includes a large triangular cut or relief near the inner edge creating a V-shaped negative space toward the center.
2 regions
x 0.07 · y 0.60 · w 0.25 · h 0.35 (high); x 0.68 · y 0.58 · w 0.25 · h 0.35 (high) - Top edge detailTop panels have a slightly raised outer rim with a visible sharp edge profile along the front lip.
1 region
x 0.16 · y 0.43 · w 0.68 · h 0.10 (medium) - Finish and textureUniform smooth matte finish with subtle specular highlights along edges, suggesting a painted or coated surface rather than visible wood grain.
Other
Staged indoor scene with woven rug under the footrest, soft natural light from left, blurred outdoor view at left and a fireplace with stacked wood at right rear.
- Surface and propBeige-brown woven rug with horizontal stripe texture covering the visible floor area beneath the footrest.
1 region
x 0.00 · y 0.70 · w 1.00 · h 0.30 (high) - Background elementsLeft background shows a blurred sunlit outdoor scene with vertical fence elements; right background shows a dark fireplace opening with stacked firewood.
2 regions
x 0.00 · y 0.00 · w 0.50 · h 0.48 (medium); x 0.62 · y 0.12 · w 0.36 · h 0.36 (medium) - Lighting and shadowSoft directional light from the left casts diffuse shadow of the footrest to the right and slightly rearward on the rug.
Colors
matte dark gray· main body and legs#3D3532- Overall shapeRectangular low-profile footrest with a two-panel top separated by a shallow central valley and a small upward notch at the top center; top panels slope inward toward the center.
- 03

Product
Angular, low-profile footrest with a two-panel slanted top and four angled legs, finished in a dark matte gray. Visible seams where the top panels meet and pronounced angular cut edges on all legs and panels.
- Overall geometryLow rectangular footrest with a slanted top formed by two flat panels meeting at a central seam; body sits on four outward-angled triangular legs creating an angular silhouette.
1 region
x 0.58 · y 0.58 · w 0.33 · h 0.24 (high) - Top panel detailTwo flat top panels with a visible straight seam down the center; top panels slope downward away from the viewer toward the chair.
1 region
x 0.65 · y 0.55 · w 0.28 · h 0.18 (high) - Leg constructionEach leg is a thick, flat panel cut into a triangular/angled shape that tapers toward the floor, forming an open angular space beneath the footrest.
2 regions
x 0.61 · y 0.68 · w 0.22 · h 0.14 (high); x 0.78 · y 0.66 · w 0.12 · h 0.13 (high) - Surface finishMatte, smooth painted surface with even coloration and soft specular highlights indicating a low-sheen finish.
1 region
x 0.60 · y 0.56 · w 0.30 · h 0.30 (medium) - Edge and joint detailSharp, straight edges on panels and visible small gap at joints where panels meet; no visible screws or bolt heads on the visible faces.
1 region
x 0.64 · y 0.54 · w 0.28 · h 0.20 (medium)
Other
Lifestyle scene showing the footrest paired with a matching chair and side table, placed on a woven rug indoors near a fireplace and large open window; warm sunlight from the left creates soft shadows.
- Matching chair nearbyA matching angular chair is positioned behind and to the left of the footrest, sharing the same color and panel construction.
1 region
x 0.20 · y 0.34 · w 0.52 · h 0.50 (high) - Side table and propsSmall matching side table to the left holds a dome-encased bulb lamp and a pair of sunglasses.
1 region
x 0.04 · y 0.60 · w 0.20 · h 0.21 (high) - Rug and footwearTextured woven rug under the footrest with a pair of sandals placed on the rug in front of the footrest.
1 region
x 0.36 · y 0.74 · w 0.58 · h 0.20 (high) - Background and lightingLarge vertical opening to an outdoor lawn and trees fills the left background with bright sunlight; interior right side shows a fireplace inset and lit firewood.
2 regions
x 0.00 · y 0.00 · w 0.52 · h 0.40 (medium); x 0.88 · y 0.52 · w 0.12 · h 0.28 (medium) - Shot compositionThree-quarter angled lifestyle shot framing the footrest in the lower-right foreground with soft natural light and warm indoor accents.
Colors
dark charcoal gray· top panels and legs#3C312B- Overall geometryLow rectangular footrest with a slanted top formed by two flat panels meeting at a central seam; body sits on four outward-angled triangular legs creating an angular silhouette.
Documents & Data
Q&A
3 answered- Is this footrest designed to be used with any brand of Adirondack chair, or only with the matching ORI Muskoka chair?
- This footrest is designed specifically to pair with the matching ORI Muskoka Adirondack chair [1]. While the dimensions might allow use with other Adirondack-style chairs, compatibility with other brands is not guaranteed.
- How does the HDPE material hold up in direct sunlight on a hot day—does it become uncomfortably hot to the touch?
- HDPE lumber warms up in direct sun but doesn't become dangerously hot. On a 90°F day, black HDPE furniture reaches about 110–125°F and cools down in 30–60 seconds once you sit down [4]. Lighter colors stay even cooler. The material's low thermal conductivity keeps it comfortable to sit on, unlike metal [3][6].
- What specific care or cleaning instructions are recommended for maintaining the color and finish of this footrest?
- HDPE is low-maintenance — simply clean with soap and water or a gentle pressure wash [2][8]. Avoid abrasive scouring pads or harsh chemical cleaners that could dull the finish. No painting, staining, or sealing is needed because the color is molded through the entire material [6].