Snoc
Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor
The Evolution Two-Way Cylindrical Wall Sconce is a wall-mounted lighting fixture that projects light both up and down, suitable for indoor and outdoor use. Constructed from weather-resistant powder-coated cast aluminum, it works with a standard A19 E26 LED bulb and measures 12 inches by 4.5 inches by 6.25 inches (30.5 cm by 11.5 cm by 16 cm). Designed and made in Quebec, this commercial-grade fixture comes with an installation guide.
- Material
- powder-coated cast aluminum
- Style
- minimalist, modern, contemporary
- Category
- Home & Garden > Lighting > Lighting Fixtures > Wall Light Fixtures
Size
Specifications
Minimalist cylindrical wall sconce that casts light upward and downward, suitable for indoor and outdoor use. Made of weather-resistant powder-coated cast aluminum.
Two-way light distribution; Weather-resistant powder-coated cast aluminum construction; Indoor and outdoor use; Compatible with A19 E26 LED bulb; Installation guide included; Commercial grade.
- Material
- powder-coated cast aluminum
- Style
- minimalist, modern, contemporary
- Gender
- unisex
- Condition
- new
- Dimensions
- 12x4.5x6.25 in
- Category
- Home & Garden > Lighting > Lighting Fixtures > Wall Light Fixtures
Additional Attributes
- weather-resistant
- powder-coated cast aluminum construction
- indoor and outdoor use
- two-way light distribution
- commercial grade
- designed and made in Quebec
- minimalist tubular design
- compatible with A19 E26 LED bulb
- installation guide included
- available in multiple finishes
Product Insights
Snoc's Evolution Two-Way Cylindrical Wall Sconce Indoor and Outdoor is a 214 CAD hardwired 120V cast-aluminum wall fixture whose single cylindrical housing uses one 360° A19 bulb to feed both up and down apertures, keeping the two light cones matched and replacing two separate sconces with one rough-in and one standard wall box; it accepts 400-1000 lumens (800-900 recommended) in 2700-3000K, with filament A19s spreading a true 360° for even illumination while domed LEDs throw only about 220°, and output aimed at the wall bounces indirectly off ceiling and floor to avoid eye-level glare. Its promise is Quebec-made durability: cast A-356 or A-413 aluminum held under 0.2% copper and resisting salt-spray pitting, a baked UV-resistant polyester powder coat inside and out, a separate 5-year finish warranty, and a finish expected to last 10-15 years inland before noticeable fade, with Greige, Hazelnut, Grey and Pine/Bottle Green holding colour longest, Terracotta the sun-fade risk, and all five finishes sharing one 214 CAD price and one size. The tradeoffs are explicit: it needs 30-40 cm of clearance above the top opening for the upwash to read vertically and 1.5-2.5 m spacing along a run; its open, diffuser-less tube requires a damp- or wet-rated A19 outdoors; the down cone glares at head height along corridors, so it works best as an accent layer rather than in circulation paths; and at 6.25 inches of projection it exceeds the 4-inch ADA limit. The powder coat is the corrosion barrier but not spot-repairable, so a chip or pinhole can let moisture spread sideways beneath the film, making unboxing inspection important; small-batch finishing brings slight shade variation, coastal salt air accelerates wear, an occasional fresh-water rinse helps the coating last, and the fixture is made to order with 10-20 working days of production before dispatch, so the electrician should be booked only after it arrives.
Verified claims
- Spacing
- Space two-way sconces 1.5-2.5 m (about 5-8 ft) apart along a run
- Uplight headroom
- Needs 30-40 cm above the top opening for the upwash to read vertically
- Symmetry
- One 360° A19 feeds both apertures, so the up and down cones stay matched
- Glare control
- Aimed at the wall, the light stays out of passing eyes; down cones glare along corridors
- Dual function
- One housing covers both the up and down accent functions that would otherwise need two sconces
- Brightness
- Recommended brightness is 800–900 lumens, but fixture accepts 400–1000 lumens.
- Color temperature
- A 2700-3000K A19 reproduces the brand's warm 3000K integrated-LED look.
- Beam spread
- Filament A19s spread a true 360° so both openings light evenly; domed LEDs throw about 220°.
- Bulb damp rating
- The tube is open at both ends, so outdoor mounting needs a damp- or wet-rated A19.
- Indirect light
- Output aimed at the wall bounces softly off ceiling and floor, avoiding eye-level glare.
- Ceiling clearance
- Needs 30-40 cm of air above for the uplight; less flattens the upper cone.
- Corridor glare
- Downlight aimed along a corridor becomes a head-height glare source.
- Bulb enclosure
- Open at both ends with no diffuser, so the A19 needs a damp-rated bulb outdoors
- Corrosion resistance
- Cast aluminum is A-356 or A-413 alloy held under 0.2% copper, resisting salt-spray pitting.
- Powder coat
- Baked polyester powder coat, an outdoor UV-resistant chemistry, covers the cylinder inside and out.
- Coating durability
- The powder coat is the corrosion barrier; a chip or pinhole is permanent and cannot be spot-repaired.
- Finish warranty
- The powder-coated finish is covered by a separate 5-year warranty against chipping and discoloration.
- Finish lifespan
- Inland the finish typically lasts 10 to 15 years before noticeable fade; coastal salt air accelerates wear.
- Finish durability
- Baked UV-resistant polyester powder coat, applied inside and out.
- Scratch corrosion
- A scratched powder coat can spread filiform corrosion sideways beneath the film.
- Lead time
- Made to order: SNOC quotes 10 to 20 working days of production before dispatch.
- Coating repairability
- The encapsulating powder coat is not spot-repairable; a scratch can let moisture spread beneath it.
- Coastal durability
- In salt air, a powder-coated aluminum sconce holds its finish about 10 to 15 years.
- Finish UV stability
- Terracotta is the sun-fade risk; Greige, Hazelnut, Grey and Pine/Bottle Green hold color.
- Finish selection
- All five finishes — Greige, Hazelnut, Pine/Bottle Green, Terracotta, Grey — share one 214 CAD price and ONE SIZE
- Finish character
- Greige is a warm beige-grey and Grey a straight cool grey; only Pine/Bottle Green and Terracotta are saturated accents
- Batch variation
- Small-batch production can vary finish shade slightly from one batch to the next
- Colour stability
- Terracotta is the finish most exposed to sun fade; neutral earth tones and the green hold their colour longest
- Climate design
- Designed for the Canadian climate: freeze-thaw, road salt and hard UV.
- Wiring
- Hardwired at 120V line voltage on a standard wall box; no plug-in or low-voltage version.
- Mounting bracket
- Hardwired fixture ships with a wall-box mounting plate for the electrician; supplied screws can run minimal.
- ADA compliance
- At 6.25 inches of projection it exceeds the 4-inch ADA limit for circulation paths.
Product record
- Title
- Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor
- Brand
- Snoc
- Price
- 214 CAD
- Availability
- In stock
Buying Guide
1 comparison · 8 sourcesUses
Adding a striking up-and-down light accent to entryways and feature walls
This cylindrical sconce casts light upward and downward at the same time, creating distinct cone-shaped patches of warm light on the wall above and below the fixture. Use it to give an entryway or room a decorative, almost theatrical play of light, indoors or out, with a range of finishes to match your surfaces or add a modern accent. Installation by a certified electrician is strongly recommended.[1,2]
A wall sconce that works inside and out
This cylindrical two-way sconce can be placed both indoors and outdoors, making it easy to light an entryway, patio, or interior wall with the same fixture. Its weather-resistant powder-coated cast aluminum construction is built to hold up outside.[1]
Product comparison
Compared within this brand.
| Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor: Choose this if you want a minimalist cylindrical sconce that casts light both upward and downward, creating a distinctive double pattern on walls in entryways, rooms, or outdoor installations. Its weather-resistant, powder-coated cast aluminum body is commercial grade and rated for indoor and outdoor use, with five color options (Greige, Hazelnut, Pine/Bottle Green, Terracotta, and Grey) and compatibility with an A19 E26 LED bulb. Note that because each piece is made in Quebec in small batches, finish may vary slightly between batches, and installation by a certified electrician is strongly recommended.[1,3] | Evolution Short Cylindrical Wall Sconce Indoor And Outdoor: Choose this if you want a compact, sleek modern accent sconce for indoor or outdoor use: its weather-resistant powder-coated cast aluminum body is commercial grade, comes in natural tones like Greige, Hazelnut, Pine/Bottle Green, or Terracotta, and measures 7.5 inches tall by 6 inches wide. It casts warm downward light only from a PAR30 socket (or A19 bulb) up to 75W max, so it suits illuminating walls or areas below the fixture rather than spreading light upward. Plan for installation by a certified electrician, which the brand strongly recommends.[4,5,6] | Danube Two-Way Wall Sconce Indoor And Outdoor: Choose this if you want an indoor-outdoor wall sconce that casts warm light upward and downward with a slight glow at the sides, creating what the retailer describes as an elegant, almost theatrical play of light and shadow. It is a weather-resistant powder-coated cast aluminum fixture rated for dry and wet locations, with integrated 7W LED modules dimmable with an electronic dimmer, commercial-grade build, and a lifetime guarantee on its aluminum components. Note that professional installation by a certified electrician is strongly recommended, and it comes in one size in black or white.[7,8] |
Image Analysis
3 images- 01
Product
Two identical cylindrical wall sconces with cylindrical bodies mounted vertically; each sconce emits focused up-and-down light creating distinct cone-shaped illumination on the wall.
- Cylindrical bodyEach sconce is a vertically oriented smooth cylinder with open circular ends at top and bottom; cylinder projects slightly from the wall.
2 regions
x 0.20 · y 0.12 · w 0.12 · h 0.18 (high); x 0.60 · y 0.18 · w 0.12 · h 0.18 (high) - Mounting bracketEach cylinder is attached to the wall by a small rectangular/oval mounting plate and short arm visible at the cylinder midpoint on the wall side.
2 regions
x 0.23 · y 0.18 · w 0.06 · h 0.08 (high); x 0.64 · y 0.24 · w 0.05 · h 0.07 (high) - Light emission patternEach sconce emits strong narrow cones of warm light both upward and downward, producing distinct bright triangular patches on the textured wall above and below the fixture.
4 regions
x 0.18 · y 0.02 · w 0.18 · h 0.16 (high); x 0.18 · y 0.24 · w 0.18 · h 0.18 (high); x 0.58 · y 0.06 · w 0.18 · h 0.16 (high); x 0.58 · y 0.28 · w 0.18 · h 0.18 (high) - Finish and textureSconce surfaces appear metallic with a smooth brushed or matte silver finish that reflects ambient warm light without high gloss highlights.
2 regions
x 0.20 · y 0.12 · w 0.12 · h 0.18 (high); x 0.60 · y 0.18 · w 0.12 · h 0.18 (high)
Other
Lifestyle living-room scene showing the sconces installed above a sofa; warm ambient lighting, side table lamps, window with vertical curtain, coffee table and decorative objects are visible.
- Scene compositionInterior living-room shot framing a sofa centered beneath the two wall sconces; image crops floor and ceiling edges and includes a window opening at right.
1 region
x 0.05 · y 0.46 · w 0.90 · h 0.50 (medium) - Sofa and textilesA three-seat upholstered sofa in a muted beige-gray fabric with multiple matching cushions and a draped throw is positioned directly below the sconces.
1 region
x 0.08 · y 0.52 · w 0.75 · h 0.36 (high) - Table lampsTwo table lamps with cylindrical bases and fabric shades sit on wooden side tables at left and right sides of the sofa; both emit warm light.
2 regions
x 0.04 · y 0.56 · w 0.16 · h 0.24 (high); x 0.82 · y 0.56 · w 0.12 · h 0.26 (high) - Window and curtainTall rectangular window opening at the right edge shows a sheer or translucent vertically pleated curtain illuminated by warm interior light.
1 region
x 0.86 · y 0.08 · w 0.14 · h 0.60 (high) - Lighting and shadowsOverall scene is lit by warm artificial light; pronounced soft shadows and light falloff are visible on textured plaster wall and on the sofa surfaces.
- Rug and coffee tableLow rectangular coffee table with stacked books and a plant sits on a neutral low-pile rug in front of the sofa.
1 region
x 0.48 · y 0.78 · w 0.44 · h 0.18 (medium)
Colors
brushed silver· cylindrical body- Cylindrical bodyEach sconce is a vertically oriented smooth cylinder with open circular ends at top and bottom; cylinder projects slightly from the wall.
- 02
Product
A vertically mounted cylindrical wall sconce with a round mounting plate, installed on a textured concrete exterior wall; the fixture emits downlight and visible upwash onto the wall.
- Cylinder bodySmooth cylindrical tube mounted vertically with its open bottom visible; exterior finish appears matte and slightly textured.
1 region
x 0.60 · y 0.16 · w 0.12 · h 0.48 (high) - Mounting plateRounded rectangular mounting plate sits behind the cylinder, slightly offset so the cylinder is cantilevered from the wall; two small fastener heads visible on the plate.
1 region
x 0.68 · y 0.28 · w 0.08 · h 0.18 (high) - Downward openingCircular open end at the bottom of the cylinder showing a recessed white inner reflector and emitting visible downlight.
1 region
x 0.62 · y 0.50 · w 0.06 · h 0.06 (high) - Upward light washUpper rim of the cylinder allows light to project upward producing a diffuse illuminated area on the wall above the fixture.
1 region
x 0.58 · y 0.12 · w 0.20 · h 0.12 (high)
Other
Exterior scene showing the sconce mounted beside a wooden-framed glass door on a concrete wall at dusk with warm artificial light illuminating the wall; photo includes building eave and reflections in the glass.
- Concrete wall textureRough cast concrete wall with visible aggregate and pitting surrounding the fixture, showing the light pattern from the sconce.
1 region
x 0.44 · y 0.06 · w 0.52 · h 0.88 (medium) - Wood door frame and glassTall wooden-framed glass door directly left of the sconce with visible brass door hardware and reflections in the glass.
1 region
x 0.16 · y 0.28 · w 0.36 · h 0.58 (high) - Building eaveMetal-clad horizontal eave runs across the top-left corner of the image casting a small shadow on the wall.
1 region
x 0.00 · y 0.00 · w 0.74 · h 0.12 (high) - Lighting and time of dayScene appears to be at dusk or early evening with the sconce turned on producing warm light; sky visible in top-left corner is darker blue.
- Reflection in glassSoft interior reflection visible in the door glass including faint shapes and a rectangular frame shape inside the building.
1 region
x 0.27 · y 0.42 · w 0.18 · h 0.20 (medium)
Colors
matte cool gray· exterior cylinder and mounting platebright white· inner reflector at open bottom- Cylinder bodySmooth cylindrical tube mounted vertically with its open bottom visible; exterior finish appears matte and slightly textured.
- 03
Product
Vertical cylindrical metal wall sconce with a matte textured silver finish, mounted on a small matching backplate with a visible gold-colored screw. The cylinder is open at the bottom; the top appears capped and rounded.
- Cylinder bodyTall vertical hollow cylinder attached flush to a backplate; outer surface shows a fine pebbled matte metallic texture and even silver color; bottom opening is visible and interior appears darker.
1 region
x 0.31 · y 0.12 · w 0.42 · h 0.75 (high) - Top capTop of the cylinder has a rounded, closed appearance (no visible opening) and matches the textured silver finish of the body.
1 region
x 0.44 · y 0.12 · w 0.18 · h 0.12 (high) - BackplateSmall vertically oriented mounting backplate behind the left side of the cylinder with matching silver textured finish and beveled edges.
1 region
x 0.14 · y 0.30 · w 0.18 · h 0.34 (high) - Visible fastenerSingle round gold-colored screw or decorative fastener located near the center of the backplate on its right side.
1 region
x 0.21 · y 0.44 · w 0.03 · h 0.03 (high) - Interior finishInside bottom of the cylinder is visible and appears darker gray with a matte texture consistent with the exterior.
1 region
x 0.44 · y 0.72 · w 0.18 · h 0.12 (high)
Other
Studio product shot on a plain white background, centered composition showing a front-on vertical view of the sconce. Even diffuse lighting with minimal shadowing and no visible branding or text.
- Shot compositionProduct is centered on a uniform white background with no props; sconce shown front-on with small left-side backplate visible.
- Lighting and shadowEven diffuse lighting with soft highlights along the cylinder's curvature and minimal shadowing; slight darker rim visible around the inner bottom opening.
- Image qualityHigh-resolution clean render or photograph with sharp edges and clear texture detail.
Colors
matte silver· cylinder body#BFBFC1matte silver· backplate#929294brass gold· fastenerdark gray· interior cylinder#92918E- Cylinder bodyTall vertical hollow cylinder attached flush to a backplate; outer surface shows a fine pebbled matte metallic texture and even silver color; bottom opening is visible and interior appears darker.
Brand PDP Lookup
- Brand
- Snoc
Evolution • Cylindrical wall light with integrated LED for exteriors [1828]
Variants
5 SKUs| SKU | Title | Price | Avail |
|---|---|---|---|
| 4732006 | Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor - Greige - One Size | CA$214.00 | Yes |
| 4732007 | Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor - Hazelnut - One Size | CA$214.00 | Yes |
| 4732008 | Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor - Pine/bottle Green - One Size | CA$214.00 | Yes |
| 4732009 | Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor - Terracotta - One Size | CA$214.00 | Yes |
| 4732010 | Evolution Two-Way Cylindrical Wall Sconce Indoor And Outdoor - Grey - One Size | CA$214.00 | Yes |