Does this fleece jacket run true to size or is it oversized? I'm between sizes, can you provide chest measurements for each size?

This fleece has a relaxed fit, so it runs true to size with a bit of extra room. If you're between sizes, you can likely stick with your usual size for a comfortable layer or size down for a closer fit. Exact chest measurements are not provided in the product listing; for precise measurements, refer to Columbia's official size chart online.

What are the recommended care instructions for this fleece? Can it be machine washed and dried? Will the silicone water-repellent finish last after washing?

Yes, it can be machine washed and dried. Wash in cold water on a gentle cycle, and tumble dry on low heat. Avoid fabric softeners and bleach. The silicone water-repellent finish is durable through washing, but its effectiveness may gradually decrease over time; to restore it, use a DWR spray or heat reactivation in the dryer.

What temperature range is this jacket suitable for? Is it intended as a standalone outer layer in cool weather or as a midlayer under a shell?

This fleece is versatile for temperatures ranging from about 40–60°F (4–15°C) as a standalone outer layer in cool, dry conditions. In colder weather (below 40°F), it works well as a midlayer under a shell jacket. The MTR fleece is designed to conserve heat, but it's not windproof, so pairing with a shell is recommended for windy conditions.

How does this fleece hold up against pilling after multiple washes? Is there any special treatment to prevent pilling?

Columbia MTR fleece is made with high-quality fibers that resist pilling better than standard fleece. To minimize pilling, wash the jacket inside out on a gentle cycle, air dry or tumble dry on low, and avoid fabric softeners. If pilling occurs over time, a fabric shaver can easily remove it.

How long does the silicone water-repellent finish last? Does it need to be reapplied after washing?

The silicone water-repellent finish typically lasts for several washes—often 5–10 cycles—before its effectiveness diminishes. After washing, you can restore repellency by drying the jacket on low heat or using a DWR spray designed for fleece. The finish does not need to be reapplied after every wash, only when water stops beading on the surface.

Columbia

Timber Meadow Patterned Polar Fleece Jacket

CA$65.00CAD

In Stock

The Columbia Timber Meadow Patterned Polar Fleece Jacket is a relaxed-fit, half-zip pullover made from ultra-soft stretch polar fleece with a high-pile, mottled pattern. It provides insulation and light weather protection, featuring a silicone finish that repels water, a mock neck, elastic cuffs, and an adjustable toggle hem. The MTR fleece construction conserves body heat while maintaining loft.

Material: Polar fleece
Gender: unisex
Style: casual, relaxed-fit
Category: Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

Color

Ivory/Cream Beige

Size

X-SMALLSMALLMEDIUMLARGE

View on merchant site JSON

Specifications

Patterned polar fleece jacket with water-repellent silicone finish and relaxed fit.

MTR fleece for body heat conservation, ultra soft stretch polar fleece, silicone water-repellent finish, half-zip mock neck, elastic cuffs, adjustable toggle hem, logo emblem.

Material: Polar fleece
Style: casual, relaxed-fit
Occasion: everyday, casual, hiking
Gender: unisex
Age Group: adult
Condition: new
Category: Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

Additional Attributes

MTR fleece designed to conserve body heat with lofty structure
Ultra soft stretch polar fleece
Silicone finish repels water
Half-zip mock neck
Elastic cuffs
Adjustable toggle hem
Logo emblem in front
Relaxed fit
Patterned design

Product Insights

The Columbia Timber Meadow Patterned Polar Fleece Jacket delivers a relaxed fit that keeps its pattern undistorted, with a half-zip mock neck for an uninterrupted front canvas and an Ivory/Cream Beige colorway that suits both woods and city. Its stretch polar fleece offers warmth comparable to the Benton Springs but with greater softness, durability, and mobility, layering smoothly under a shell while feeling less bulky. The jacket adds a water-repellent finish that sheds light moisture but fades after 5–10 washes, a tradeoff that can be restored with low heat or DWR spray, and at $65 CAD it costs less than the Benton Springs. Elastic cuffs and a toggle hem allow silhouette adjustment from relaxed to active-ready, and the pilling-resistant MTR fabric transitions seamlessly from outdoor to urban settings. Suitable as a standalone layer in 40–60°F or as a midlayer when colder.

Verified claims

Pattern fit: Relaxed fit keeps the pattern undistorted; cuffs and hem adjust its visual weight.
Half-zip front: Half-zip mock neck gives the pattern a single, uninterrupted front canvas.
Colorway: Ivory/Cream Beige color makes pattern work in woods and city.
Material: Stretch polar fleece matches the warmth of the Benton Springs' fleece while being softer and more durable.
Weather protection: Water-repellent finish and adjustable hem improve weather protection; the finish fades after 5–10 washes.
Water repellent finish: Finish lasts 5–10 washes and restores with low heat or DWR spray.
Benton Springs comparison: At 65 CAD, it costs less than the Benton Springs ($65 USD) and adds a water-repellent finish.
Mobility: Offers noticeably more mobility than non-stretch Columbia fleeces.
Layering: Layers smoothly under a shell and feels less bulky than non-stretch fleece.
Adjustable fit: Elastic cuffs and toggle hem allow cinching to minimize fabric movement during active use.
Pattern stability: Relaxed fit prevents pattern distortion, keeping it proportional during activity.
Style: Patterned half-zip fleece transitions seamlessly from outdoor to urban settings with pilling-resistant MTR fabric.
Fit adjustability: Elastic cuffs and toggle hem allow the silhouette to shift from relaxed to a more defined outdoor-ready fit.
Performance: Stretch fabric, water-repellent finish, and 40-60°F warmth make it versatile for both town and trail.
Sizing and fit: Relaxed fit runs true to size; size down for a closer fit without pattern distortion.
Fit adjustment: Elastic cuffs and adjustable hem let you tailor silhouette and pattern sit.
Temperature range: Suitable for temperatures 40–60°F as standalone outer layer and as midlayer when colder.
Moisture protection: Silicone water-repellent finish sheds light moisture but diminishes after several washes.
Wash care: Wash cold on gentle cycle, tumble dry low; avoid fabric softeners.
Pilling: Resists pilling better than standard fleece; pills removable with fabric shaver.
Water repellency: Water-repellent finish lasts 5–10 washes; reactivate with low heat or DWR spray.

Product record

Title: Timber Meadow Patterned Polar Fleece Jacket
Brand: Columbia
Price: 65 CAD
Availability: In stock

Deep Research

Patterned design styling and practicality

The relaxed fit prevents the fabric from pulling tight across the body, so the pattern maintains its intended proportions without distortion, even when layered over a midweight top.
The half-zip mock neck eliminates a full-length center zipper, providing an uninterrupted front surface that allows the pattern to read as a single, cohesive graphic rather than two separate panels.
The Ivory/Cream Beige base color creates a low-contrast, earthy canvas that allows the Timber Meadow pattern to blend seamlessly into both woodland hiking palettes and urban casual wear.
Within the Timber Meadow collection, this is the patterned version, distinct from the plain full-zip and jumper styles — the half-zip silhouette dedicates the entire front panel to the pattern, making it the line's statement piece.
Elastic cuffs and an adjustable hem let you cinch the jacket at the wrists and waist, tailoring the silhouette and shifting how the pattern sits — a looser fit drapes the pattern casually, while a cinched waist creates a more defined, outdoor-oriented look.

How it compares to other Columbia fleeces

At $65 CAD — roughly $48 USD — the Timber Meadow undercuts the Benton Springs’ $65 USD list price while adding stretch, a water-repellent finish, and a patterned design, delivering a more feature-dense fleece for a lower real cost.
Unlike the women’s Benton Springs, which has a simple relaxed hem, the Timber Meadow includes an adjustable toggle hem — a detail also found on the men’s Steens Mountain 2.0 — letting you cinch the waist to trap heat and block drafts when worn as an outer layer.
Built from ultra soft stretch polar fleece, the Timber Meadow offers noticeably more mobility than the non-stretch 100% polyester MTR filament fleece of the Benton Springs/Steens Mountain, suiting it to active casual pursuits like hiking or yoga where freedom of movement matters.
Where the Benton Springs is often called out as 'not the most stylish' for its plain solid colorways, the Timber Meadow answers with a decorative patterned exterior and half-zip mock neck, making it a more fashion-conscious piece that transitions easily from trail to town.
The Timber Meadow incorporates a silicone water-repellent finish that sheds light moisture, a feature absent from the baseline Benton Springs fleece, meaning this jacket can handle drizzly errands better without an immediate shell layer.
The Timber Meadow’s MTR fleece uses a lofty structure to retain heat comparable to the 250gsm midweight Benton Springs, but its stretchy, softer hand fibers layer more smoothly under a shell and feel less bulky against the skin.

Image Analysis

3 images

01: Product
Front view of a long-sleeve, patterned polar fleece pullover with a short vertical zipper at the chest, stand collar, and a front pouch-style seam; worn by a model.
SilhouetteLoose-fit pullover silhouette with dropped shoulders and a slightly boxy body ending at the hips.
1 region
x 0.07 · y 0.06 · w 0.86 · h 0.78 (high)
Fabric and textureThick, high-pile fleece with a plush, shaggy texture visible across the entire garment surface.
1 region
x 0.12 · y 0.12 · w 0.76 · h 0.66 (high)
Neck and closureShort stand collar with a centered vertical half-zipper that runs from the collar down to mid-chest; zipper tape is lighter in color and zipper pull is visible.
1 region
x 0.40 · y 0.10 · w 0.20 · h 0.22 (high)
Front seam / pouchHorizontal curved seam across lower chest resembling a kangaroo-style pouch panel or decorative seam.
1 region
x 0.18 · y 0.44 · w 0.64 · h 0.20 (high)
Sleeve and cuffFull-length sleeves with gathered or elasticized cuffs creating a slight ruched look at the wrists.
2 regions
x 0.08 · y 0.54 · w 0.23 · h 0.35 (high); x 0.69 · y 0.55 · w 0.23 · h 0.34 (high)
PatternAll-over irregular splotchy pattern of lighter and darker areas producing a tie-dye or mottled appearance.
1 region
x 0.12 · y 0.12 · w 0.76 · h 0.66 (high)
Chest markingSmall rectangular sewn patch on the left chest area; text or logo on the patch is visible as a light mark but not legible at this resolution.Partial
1 region
x 0.58 · y 0.22 · w 0.08 · h 0.06 (medium)
HemSlightly rounded hem with the fleece edge appearing soft and unstructured rather than rigidly finished.
1 region
x 0.20 · y 0.66 · w 0.60 · h 0.20 (high)
Other
Studio-front product shot on a neutral light-gray background showing the model from head to hips with soft frontal lighting and minimal shadows.
Model and poseFemale model standing facing forward with arms relaxed; right hand rests near hip and left hand partly visible at side.
1 region
x 0.10 · y 0.00 · w 0.80 · h 1.00 (high)
BackgroundUniform light-gray background with no visible props or scenery.
Lighting and shadowsSoft, even frontal lighting that produces minimal harsh shadows and highlights the fleece texture.
Image crop and framingCentered crop showing the product and model from just above the head to the upper thighs; bottom of trousers visible.
Colors
light beige· main fleece#CCB39Coff-white· pattern accent
02: Product
Rear view of a patterned plush polar-fleece jacket shown on a model; visible features include a relaxed boxy back, dropped shoulders, long loose sleeves with elasticized cuffs, a horizontal seam across the lower back, and a short hem that sits at the hips.
Overall silhouetteRelaxed, boxy back viewed from rear on a standing model; hem sits at the top of the hips and the jacket hangs slightly loose over the pants.
1 region
x 0.08 · y 0.08 · w 0.84 · h 0.78 (high)
Fabric textureThick, high-pile plush fleece with a soft, fuzzy surface visible across the entire back and sleeves.
1 region
x 0.12 · y 0.12 · w 0.76 · h 0.68 (high)
PatternIrregular mottled two-tone pattern with lighter off-white splotches over a warm beige base, distributed across the back and sleeves.
1 region
x 0.10 · y 0.10 · w 0.80 · h 0.70 (high)
Seam detailHorizontal seam runs across the lower back about one third up from the hem, visible as a stitched line interrupting the pile.
1 region
x 0.12 · y 0.58 · w 0.76 · h 0.06 (high)
Sleeve constructionDropped shoulder with long loose sleeves that gather slightly at the elasticized cuffs, creating a blouson effect.
1 region
x 0.06 · y 0.24 · w 0.88 · h 0.58 (high)
Side seam tagSmall rectangular woven tag located at the left side seam near the hem; colored blue with small white characters that are not legible at this resolution.Partial
1 region
x 0.14 · y 0.66 · w 0.04 · h 0.08 (medium)
Hem finishSlightly gathered hem that appears elasticized or shirred, producing a softly rounded lower edge.
1 region
x 0.12 · y 0.66 · w 0.76 · h 0.14 (high)
Neckline and upper backHigh crew-style neckline visible behind the model's hair with the fleece continuing uninterrupted to the shoulders.
1 region
x 0.24 · y 0.06 · w 0.52 · h 0.22 (high)
Other
Studio product photo showing a model from the rear against a plain light gray background; even soft lighting with minimal shadows; image cropped to show the jacket from head to hips.
Shot compositionVertical studio shot framed from the top of the head to just below the hips with the model turned slightly to the left showing the back and a small profile of the face.
BackgroundUniform light gray background with no visible props or set elements.
Model presenceFemale model wearing the jacket; long dark hair falls over the upper back and partially covers the right shoulder area of the jacket.
1 region
x 0.36 · y 0.02 · w 0.28 · h 0.30 (high)
Lighting and shadowSoft, diffuse lighting with gentle shadows under the hem and between the arms and body, no harsh highlights.
Image qualitySharp focus on the fleece texture and garment details; no visible compression artifacts.
Colors
warm beige· fleece body base#CBAC93off-white· fleece body pattern
03: Product
Front three-quarter view of a pullover patterned fleece jacket with a tall stand collar, quarter-length zipper, visible zipper pull, elasticized hem, and mottled beige-and-cream pile texture. Small embroidered white chest logo and a small blue woven side tag are visible on the garment.
Collar and openingTall stand collar finished in the same fleece material; a quarter-length front zipper runs from collar down the chest with a visible metal zipper pull and white zipper tape.
1 region
x 0.38 · y 0.09 · w 0.24 · h 0.28 (high)
Fleece texture and patternSoft high-pile polar-fleece surface with an irregular mottled pattern of light beige, tan, and off-white splotches across the visible front and sleeves.
1 region
x 0.12 · y 0.10 · w 0.66 · h 0.65 (high)
Hem and fit detailElasticized gathered hem at the waist visible across the front, creating a slightly bloused fit above the pants.
1 region
x 0.32 · y 0.55 · w 0.48 · h 0.18 (high)
Left chest embroidery“Small white embroidered wordmark on the left chest area.”Partial
1 region
x 0.58 · y 0.24 · w 0.12 · h 0.07 (medium)
Right side woven tagSmall vertical blue woven tag sewn into the right side seam near the hem.
1 region
x 0.69 · y 0.54 · w 0.03 · h 0.06 (high)
Zipper pull detailShort metal zipper pull with a circular ring attached, visible at the mid-chest when partially zipped.
1 region
x 0.47 · y 0.28 · w 0.08 · h 0.12 (high)
Other
Lifestyle studio shot showing a model wearing the jacket with accessories and a plain light-gray background; soft even lighting and natural shadows; image cropped mid-thigh.
Model and poseFemale model shown from mid-thigh up, standing at a slight three-quarter angle to camera, left arm bent holding a white tote strap, right arm relaxed at side.
1 region
x 0.06 · y 0.03 · w 0.88 · h 0.94 (high)
Visible accessoriesModel wears a pale yellow ribbed knit beanie; carrying a white tote bag with braided brown-and-white shoulder strap; a dark brown baseball cap is hanging from the tote.
2 regions
x 0.06 · y 0.02 · w 0.34 · h 0.20 (high); x 0.05 · y 0.44 · w 0.33 · h 0.34 (high)
Undergarment visibleWhite tank top or sports bra visible through partially open zipper at the chest.
1 region
x 0.44 · y 0.22 · w 0.22 · h 0.18 (high)
Background and lightingEven studio lighting on a clean pale gray background producing soft shadows and even color rendering.
Image cropImage cropped at mid-thigh; lower legs not visible.
1 region
x 0.00 · y 0.60 · w 1.00 · h 0.40 (high)
Colors
mottled light beige and cream· fleece body#DBBCA3white· zipper tapewhite· chest embroidery

Documents & Data

Q&A

5 answered

Does this fleece jacket run true to size or is it oversized? I'm between sizes, can you provide chest measurements for each size?: This fleece has a relaxed fit, so it runs true to size with a bit of extra room. If you're between sizes, you can likely stick with your usual size for a comfortable layer or size down for a closer fit. Exact chest measurements are not provided in the product listing; for precise measurements, refer to Columbia's official size chart online.
What are the recommended care instructions for this fleece? Can it be machine washed and dried? Will the silicone water-repellent finish last after washing?: Yes, it can be machine washed and dried. Wash in cold water on a gentle cycle, and tumble dry on low heat. Avoid fabric softeners and bleach. The silicone water-repellent finish is durable through washing, but its effectiveness may gradually decrease over time; to restore it, use a DWR spray or heat reactivation in the dryer.
What temperature range is this jacket suitable for? Is it intended as a standalone outer layer in cool weather or as a midlayer under a shell?: This fleece is versatile for temperatures ranging from about 40–60°F (4–15°C) as a standalone outer layer in cool, dry conditions. In colder weather (below 40°F), it works well as a midlayer under a shell jacket. The MTR fleece is designed to conserve heat, but it's not windproof, so pairing with a shell is recommended for windy conditions.
How does this fleece hold up against pilling after multiple washes? Is there any special treatment to prevent pilling?: Columbia MTR fleece is made with high-quality fibers that resist pilling better than standard fleece. To minimize pilling, wash the jacket inside out on a gentle cycle, air dry or tumble dry on low, and avoid fabric softeners. If pilling occurs over time, a fabric shaver can easily remove it.
How long does the silicone water-repellent finish last? Does it need to be reapplied after washing?: The silicone water-repellent finish typically lasts for several washes—often 5–10 cycles—before its effectiveness diminishes. After washing, you can restore repellency by drying the jacket on low heat or using a DWR spray designed for fleece. The finish does not need to be reapplied after every wash, only when water stops beading on the surface.

Provenance

Merchant Link: https://www.simons.ca/en/women-sportswear/outdoor/timber-meadow-patterned-polar-fleece-jacket--9385-26109?colourId=0
Updated: July 31, 2026