Tone-On-Tone Topstitched Heart Card Holder

Compact faux leather card holder with heart-shaped design and tone-on-tone topstitching.

Pebbled faux leather exterior, polyester lining, multiple card slots, compact size.

Material

Pebbled faux leather, polyester lining

Secondary

polyester

Gender

female

Age Group

adult

Condition

new

Category

Apparel & Accessories > Handbags, Wallets & Cases > Business Card Cases

01

Product

Front-facing rectangular card holder made from a smooth, slightly glossy black material with stitched decorative pattern on the lower front panel and two horizontal card slots along the top edge.

• Overall shapeRectangular flat card holder with slightly rounded bottom corners and straight top edge, shown face-on.
  1 region

  x 0.08 · y 0.35 · w 0.84 · h 0.43 (high)
• Material and finishSmooth, slightly glossy leather-like surface with visible light reflections along raised edges and seams.
  1 region

  x 0.08 · y 0.35 · w 0.84 · h 0.43 (high)
• Top card slotsTwo horizontal card slots visible at the top front: a narrow top slot above a slightly wider slot, each defined by stitched seams and a thin strip of material forming the slot opening.
  1 region

  x 0.09 · y 0.36 · w 0.82 · h 0.12 (high)
• Lower front topstitch patternDecorative topstitching forms a repeated pointed triangular motif across the lower front panel; stitches are tonal and follow the raised shapes to create a textured pattern.
  1 region

  x 0.09 · y 0.54 · w 0.82 · h 0.22 (high)
• Edge finishingNarrow stitched binding runs around the perimeter of the card holder, visible as a thin raised seam along the left, right and bottom edges.
  1 region

  x 0.08 · y 0.35 · w 0.84 · h 0.43 (high)

Other

Product centered on a plain light gray background with soft shadow beneath; image is a studio-style front-on product shot with even lighting and no visible props.

• BackgroundUniform light gray backdrop filling the frame.
• ShadowSoft, short shadow immediately beneath the card holder indicating overhead diffuse lighting.
  1 region

  x 0.28 · y 0.72 · w 0.44 · h 0.06 (medium)
• Shot compositionFace-on, centered composition showing the front surface of the card holder with even margins on left and right and substantial empty space above.

Colors

black· main body#0C0E0E

02

Product

Front-facing rectangular black card holder photographed flat with visible multiple card slots, stitched edges, and a subtle grain texture on the surface.

• Overall shapeRectangular, horizontally oriented card holder with slightly rounded bottom corners and a straight top edge
  1 region

  x 0.09 · y 0.56 · w 0.83 · h 0.28 (high)
• Primary pocketLarge flat pocket covering most of the front face, opening at the top beneath a stitched top band
  1 region

  x 0.09 · y 0.58 · w 0.74 · h 0.23 (high)
• Right-side vertical card slotsTwo narrow vertical card-slot openings stacked at the right edge, defined by parallel vertical stitching lines
  1 region

  x 0.69 · y 0.60 · w 0.20 · h 0.23 (high)
• Top stitched bandNarrow horizontal band across the top with visible tone-on-tone topstitching along its lower edge
  1 region

  x 0.09 · y 0.56 · w 0.82 · h 0.06 (high)
• Edge stitchingVisible single-line topstitching follows the outer perimeter, including along the bottom rounded corner and right edge
  1 region

  x 0.09 · y 0.56 · w 0.83 · h 0.28 (high)
• Surface textureSmooth leather-like surface with a fine, subtle pebble grain visible at full view
  1 region

  x 0.12 · y 0.59 · w 0.74 · h 0.20 (medium)

Other

Studio-style product shot on a light neutral background, centered composition with soft shadow beneath the item and even lighting.

• Background and compositionCard holder centered horizontally near the lower half of the frame on a uniform light gray background
• Shadow and lightingSoft diffuse shadow directly below the product indicating even top lighting; minimal specular highlights
• Image framingProduct fully visible with small margin on left and right and large empty space above

Colors

matte black· main body#131414