Textured leather bi-fold wallet product image (primary)
Front-facing rectangular bi-fold wallet with textured black exterior, visible edge stitching, and a small gold metal logo near the lower center.

Lauren Ralph Lauren

Textured Leather Bi-Fold Wallet

4.5/5 (2)
CA$120.00CAD
In Stock

Lauren Ralph Lauren textured leather bi-fold wallet, made from genuine cow leather with a polyester twill lining. It features a snap-button closure, multiple card and bill slots, a zip change pocket, and an embossed gold-tone logo. Dimensions: 7 by 3.5 by 0.5 inches (17.5 by 9 by 1.5 cm).

Material
Genuine leather
Category
Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

Color

BlackEcru/LinenBrown

Size

ONE SIZE

Specifications

Textured leather bi-fold wallet with snap closure and multiple compartments.

Bi-fold design, snap button closure, multiple card slots, bill compartment, zip change pocket, embossed logo.

Material
Genuine leather
Gender
female
Age Group
adult
Condition
new
Dimensions
7x0.5x3.5 in
Category
Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

Additional Attributes

  • textured leather finish
  • genuine leather
  • twill lining
  • bi-fold style
  • snap button closure
  • multiple card slots
  • bill compartment
  • zip change pocket
  • embossed golden logo
  • height: 3.5 in
  • length: 7 in
  • depth: 0.5 in

Product Insights

The Lauren Ralph Lauren Textured Leather Bi-Fold Wallet offers understated luxury through American practicality and European minimalism, with a slim 0.5-inch profile that prevents pocket bulge and a coated, embossed leather finish that hides scratches and resists patina and UV discoloration, but overstuffing can warp the shape and misalign the snap, and the coated leather and polyester lining block patina development.

Verified claims

Patina
The coated leather surface resists patina, so the wallet retains its original tone instead of developing a dramatic color shift.
Scratch resistance
The embossed grain finish hides minor scratches and scuffs better than smooth leather.
Care
If the wallet gets wet, pat it dry and let it air-dry at room temperature—never with a hairdryer—then apply a light conditioner to the leather panels to prevent stiffness and water stains.
Overstuffing
Overstuffing can warp the slim profile and misalign the snap.
Slim profile
0.5-inch depth prevents pocket bulge in pockets and small bags.
Compartments
Zippered coin pocket and full-length bill slot keep coins secure and bills flat.
Design ethos
The wallet's design reflects a blend of classic American influences and modern European elements for a sense of understated luxury.
Subtle branding
The wallet features an embossed golden logo.
Leather grade
The wallet is made from genuine leather (100% cow leather), not full-grain or top-grain leather.
Lining material
The lining is twill made from 100% polyester, so it is both twill and polyester.
Slim profile
At 0.5 inches deep, the wallet stays exceptionally slim for a bi-fold, so it won't create a noticeable bulge in a front pocket or small clutch.
Closure
The wallet is a bi-fold with a snap closure.
Card slot fit
One buyer reports the card pockets are too tight, requiring tweezers to pull cards out.

Product record

Title
Textured Leather Bi-Fold Wallet
Brand
Lauren Ralph Lauren
Price
120 CAD
Availability
In stock
Rating
4.5 stars, 2 reviews, scale 5

Image Analysis

3 images
Textured leather bi-fold wallet product image (primary)
01

Product

Front-facing rectangular bi-fold wallet with textured black exterior, visible edge stitching, and a small gold metal logo near the lower center.

  • Overall shapeHorizontally oriented rectangular wallet shown closed, with a long horizontal profile and straight edges.
    1 regionx 0.05 · y 0.40 · w 0.90 · h 0.45 (high)
  • Exterior textureUniform fine diagonal crosshatch texture across the visible exterior surface consistent with grained or Saffiano-style leather.
    1 regionx 0.06 · y 0.41 · w 0.88 · h 0.40 (high)
  • Edge stitchingSingle-line topstitched seam running along the wallet perimeter visible on the front face and edges.
    1 regionx 0.05 · y 0.40 · w 0.90 · h 0.45 (high)
  • Metal logo hardwareSmall gold metal logo emblem mounted near the lower-center of the front face.
    1 regionx 0.48 · y 0.76 · w 0.04 · h 0.04 (high)
  • Front text/logoRLUncertain
    1 regionx 0.48 · y 0.76 · w 0.04 · h 0.04 (high)

Other

Product photographed on a neutral light gray background, centered horizontally with a soft shadow beneath; image is well lit with minimal reflections.

  • Background and stagingNeutral light gray seamless background with a subtle drop shadow under the wallet.
    1 regionx 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
  • Shot compositionFront-facing centered product shot with the wallet occupying the lower central portion of the frame and generous empty space above.
    1 regionx 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
  • Lighting and shadowEven, diffuse lighting with a soft shadow directly beneath the wallet and faint highlights on the textured surface.
    1 regionx 0.05 · y 0.75 · w 0.90 · h 0.20 (high)

Colors

black· exterior#0D0D0Emetallic gold· logo hardware
Textured leather bi-fold wallet product image 2
02

Product

Rear-facing rectangular bi-fold wallet in textured black leather with a horizontal external zip pocket and a leather-encased zipper pull with gold metal hardware.

  • Overall shapeRectangular, slim bi-fold wallet shown closed with long horizontal orientation and straight edges.
    1 regionx 0.04 · y 0.52 · w 0.92 · h 0.36 (high)
  • Exterior materialTextured leather surface with a tight crosshatch grain visible across the exterior panels.
    1 regionx 0.06 · y 0.54 · w 0.90 · h 0.32 (high)
  • External zip pocketHorizontal zippered pocket runs near the top third of the visible panel, set inside a stitched rectangular channel.
    1 regionx 0.12 · y 0.58 · w 0.76 · h 0.08 (high)
  • Zipper hardwareGold metal zipper teeth and rectangular gold zipper stop visible along the pocket opening.
    1 regionx 0.12 · y 0.56 · w 0.76 · h 0.12 (high)
  • Zipper pullShort leather pull tab attached to the zipper via a gold metal ring; pull tab matches the wallet leather and is stitched.
    1 regionx 0.06 · y 0.58 · w 0.12 · h 0.18 (high)
  • Edge stitchingSingle-line stitching runs along the wallet perimeter and around the zip pocket channel, visible in matching dark thread.
    1 regionx 0.04 · y 0.52 · w 0.92 · h 0.36 (high)

Other

Studio-style product shot with a neutral light grey background; wallet centered horizontally near the lower half of the frame casting a faint shadow below.

  • Background and stagingUniform light grey background with no props or packaging visible.
  • Shot compositionStraight-on view showing the back/exterior face of the closed wallet, centered horizontally and positioned in the lower half of the image.
    1 regionx 0.00 · y 0.00 · w 1.00 · h 1.00 (medium)
  • ShadowSoft shadow directly beneath the wallet indicating top-front lighting; shadow is subtle and contained near the bottom edge of the wallet.
    1 regionx 0.10 · y 0.84 · w 0.80 · h 0.06 (medium)

Colors

textured black· main body#0C0D0Fwarm gold metal· zipper hardware and pull ring
Textured leather bi-fold wallet product image 3
03

Product

Close-up view of the open interior of a black bi-fold wallet showing card slot rows, an ID window, a snap-closure pocket, and gold foil brand text on the lower interior panel.

  • Overall interior layoutInterior of an open bi-fold wallet showing two main panels with multiple vertical card slots on each panel and a central bill compartment visible along the fold.
    1 regionx 0.05 · y 0.05 · w 0.90 · h 0.90 (high)
  • Card slot rowsSeveral stacked, evenly spaced vertical card slots with stitched edges visible on both the upper and lower panels; the slots form narrow rectangular openings aligned parallel to the fold.
    2 regionsx 0.58 · y 0.08 · w 0.36 · h 0.34 (high); x 0.12 · y 0.08 · w 0.46 · h 0.36 (high)
  • ID windowRectangular ID window with a clear or dark mesh insert and stitched trim, located on the upper left panel near the top edge.
    1 regionx 0.08 · y 0.07 · w 0.26 · h 0.22 (high)
  • Snap closure tabRounded rectangular snap tab on the lower right panel with a visible circular gold metal snap stud.
    1 regionx 0.72 · y 0.56 · w 0.16 · h 0.18 (high)
  • Gold foil brand textGold foil text printed on the lower interior panel that reads 'LAUREN' with smaller text underneath reading 'RALPH LAUREN'.
    1 regionx 0.18 · y 0.74 · w 0.46 · h 0.16 (high)
  • Leather surface and stitchingSmooth textured black leather panels with visible single-line topstitching along panel edges and around card slot openings.
    1 regionx 0.12 · y 0.66 · w 0.76 · h 0.30 (high)
  • Central fold and bill compartment mouthCurved inner fold creating a visible horizontal pocket mouth running along the center of the wallet interior.
    1 regionx 0.12 · y 0.42 · w 0.76 · h 0.18 (high)

Other

Studio close-up photo of the wallet on a light neutral background with soft directional lighting from upper left producing soft shadow below the product.

  • Shot compositionTight angled close-up framed diagonally so the wallet fold runs from upper left toward lower right, showing interior details at an oblique angle.
  • Background and surfaceEven light gray background with a subtle soft shadow visible under the lower edge of the wallet.
  • Lighting and reflectionsSoft diffuse lighting with slight specular highlights on the leather and on the gold snap stud and foil text.

Colors

black· leather panels#0D0E11warm gold· hardware snap and foil textdark charcoal· ID window insert#2A2B2D

Customer Reviews

2 total
4.5

2 reviews · out of 5

Super

Valerie C.

Merci!

The pockets for cards are

Karen A.

The pockets for cards are too tight, need tweezers to pull them out

Provenance

Merchant Link
https://www.simons.ca/en/women-accessories/wallets/textured-leather-bi-fold-wallet--21620-22512917?colourId=0
Updated