Jennie Pebbled Card Holder

Pebbled faux leather card holder with multiple card slots and snap closure, includes dust bag.

Bi-fold design with snap button, multiple slots, recycled lining, signature dust bag

Material

Pebbled faux leather, recycled polyester lining

Secondary

polyester

Gender

female

Age Group

adult

Condition

new

Dimensions

4x0.5x3.25 in

Category

Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

01

Product

Front-facing rectangular pebbled leather card holder in black with a centered tab strap and a silver embossed 'LAMBERT' logo on the lower front panel. Two horizontal card slot seams are visible along the top front.

• Overall shapeRectangular, flat card holder shown face-on with a slightly rounded bottom edge and squared top corners.
  1 region

  x 0.12 · y 0.38 · w 0.76 · h 0.46 (medium)
• Material textureVisible pebble-grain texture across the exterior surface consistent with pebbled leather or faux leather.
  1 region

  x 0.14 · y 0.44 · w 0.72 · h 0.34 (high)
• Top card slot seamsTwo horizontal stitched seams near the top front forming card slot openings; seams run parallel across most of the width.
  1 region

  x 0.15 · y 0.40 · w 0.70 · h 0.10 (high)
• Center tab strapVertical tab strap attached at the top center folding down over the front; tab is the same pebbled material and stitched around its edge.
  1 region

  x 0.43 · y 0.33 · w 0.14 · h 0.18 (high)
• Front logo text“LAMBERT”
  1 region

  x 0.35 · y 0.66 · w 0.30 · h 0.09 (high)
• Logo finishCapital-letter logo stamped or printed in a reflective metallic silver finish on the lower front panel.
  1 region

  x 0.35 · y 0.66 · w 0.30 · h 0.09 (high)
• Edge stitchingVisible stitched edges around the perimeter and around the tab, matching the exterior color.
  1 region

  x 0.14 · y 0.36 · w 0.72 · h 0.44 (medium)

Other

Studio product shot with neutral light gray background, soft shadow beneath the card holder, and centered composition showing the front face.

• Background and lightingPlain light gray background with even, diffuse lighting and a subtle soft shadow directly under the product.
• Shot compositionProduct centered horizontally and positioned in lower half of the image with space above; front-facing, straight-on camera angle.
• Image qualitySharp focus on product with clear detail; no visible props or packaging present.

Colors

black· main exterior#0C0D0Emetallic silver· logo text

02

Product

Close-up of the inside right side of a black pebbled card holder showing a central pocket and multiple vertical card slots with visible stitching and folded edges.

• Central interior panelFlat rectangular interior panel of black pebbled leather or leather-like material with fine pebble texture and single-line top and bottom stitching visible.
  1 region

  x 0.28 · y 0.12 · w 0.34 · h 0.76 (high)
• Vertical card slotsThree vertical card slot openings stacked at the right edge, each defined by narrow stitched seams and folded leather edges, creating thin raised ridges between slots.
  1 region

  x 0.62 · y 0.12 · w 0.36 · h 0.76 (high)
• Left inner flapPartial view of an inner flap on the left side with a curved seam and the same black pebbled texture, slightly recessed compared with the central panel.
  1 region

  x 0.00 · y 0.12 · w 0.28 · h 0.76 (high)
• Edge finishingFolded and stitched top and bottom edges visible, with a narrow sealed edge on the outer right side giving a slightly glossy finish compared with the matte pebble surface.
  2 regions

  x 0.62 · y 0.06 · w 0.36 · h 0.06 (medium); x 0.62 · y 0.86 · w 0.36 · h 0.08 (medium)
• Stitch detailEvenly spaced single-line stitching runs vertically along pocket seams and horizontally along top and bottom seams; thread appears to match the leather color.

Other

Studio-style close-up shot against a neutral light gray background with soft, even lighting and a subtle shadow beneath the product; image cropped to show the right interior section.

• Shot compositionClose-cropped product detail image showing approximately the right half of an open card holder centered vertically in the frame.
• Background and surfaceUniform light gray background with a faint shadow along the bottom edge where the product meets the surface.
  1 region

  x 0.00 · y 0.86 · w 1.00 · h 0.14 (high)
• LightingSoft, diffuse lighting producing mild highlights on the folded edges and a low-gloss sheen on the rightmost edge.

Colors

black· main leather panels and card slot edges#0D0E0E

03

Product

Front-facing rectangular pebbled black card holder with a central snap-tab closure, visible horizontal card-slot seams at the top, and tonal edge stitching.

• Overall shapeRectangular compact card holder shown face-on with slightly rounded lower corners and a flat bottom edge that rests on the surface.
  1 region

  x 0.12 · y 0.34 · w 0.76 · h 0.44 (high)
• Surface texturePebbled grain texture covering the visible face, consistent across the body and the snap tab.
  1 region

  x 0.12 · y 0.34 · w 0.76 · h 0.44 (high)
• Card-slot seamsTwo horizontal stitched seams on the upper half create three stacked card-slot openings across the left and right sides of the front face.
  2 regions

  x 0.14 · y 0.39 · w 0.33 · h 0.14 (high); x 0.53 · y 0.39 · w 0.33 · h 0.14 (high)
• Center snap tabA vertical rectangular snap tab rises from the top edge toward the center of the front face and folds down over the front to a round metal snap.
  1 region

  x 0.44 · y 0.36 · w 0.12 · h 0.20 (high)
• Snap detailSmall round silver metal snap located at the end of the tab; the snap has fine engraved characters around its perimeter but the characters are not legible at this resolution.Partial
  1 region

  x 0.48 · y 0.47 · w 0.04 · h 0.06 (high)
• StitchingTonal stitching runs along the outer edges and along each card-slot seam, visible as narrow raised lines.
  1 region

  x 0.12 · y 0.34 · w 0.76 · h 0.44 (high)

Other

Product centered on a neutral light gray background with soft shadow beneath; image is well lit and cropped to include product and surrounding negative space.

• Background and surfaceUniform light gray backdrop with a subtle shadow under the card holder indicating a flat supporting surface.
• Shot compositionFront-on studio-style shot with the product centered horizontally and placed in the lower half of the frame.
• Image qualityHigh-resolution, evenly lit photograph with clear detail of texture and stitching; no visible noise or compression artifacts.

Colors

pebbled black· body and tab#0D0E0Esilver· snap