Lauren Ralph Lauren
Burgundy Leather Zipped Card Holder
This is a compact zipped card holder by Lauren Ralph Lauren, designed to organize payment cards, coins, and small items in a single wallet. It is made of genuine leather with a fabric lining and features multiple card slots, an external front card slot, a zip-around change pocket, and an inner key ring clasp with a gold-tone swivel lobster clasp. Dimensions are 7.5 cm (3 in) in height, 13.5 cm (5.25 in) in width, and 1.5 cm (0.5 in) in depth, with gold-tone zipper hardware and a gold-tone RL logo on the front.
- Color
- Burgundy
- Material
- Genuine leather; fabric lining
- Gender
- unisex
- Category
- Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips
Specifications
Burgundy leather card holder with multiple card slots, a zip change pocket, and an inner key ring clasp.
Genuine leather, fabric lining, multiple card slots, zip change pocket, inner key ring clasp.
- Color
- Burgundy · red
- Material
- Genuine leather; fabric lining
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 13.5x1.5x7.5 cm
- Category
- Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips
Additional Attributes
- Genuine leather exterior
- Fabric lining
- Multiple card slots
- Zip change pocket
- Inner key ring clasp
- Compact card holder silhouette
- Zippered compartment
- Lauren Ralph Lauren branded design
- Burgundy leather finish
- Height: 7.5 cm (3")
- Width: 13.5 cm (5.25")
- Depth: 1.5 cm (0.5")
Product Insights
Burgundy Leather Zipped Card Holder Lauren Ralph Lauren 110 CAD 100% cow leather with fabric lining Five exterior card slots, a slip pocket, and a zipped change compartment Slim design limits capacity; overstuffing card slots can stretch or rip the leather
Verified claims
- material
- 100% cow leather with fabric lining
- dimensions
- Compact size: 7.5 cm high x 13.5 cm wide x 1.5 cm deep
- capacity
- Five exterior card slots, a slip pocket, and a zipped change compartment
- card slot fit
- Flat leather card slots start snug and loosen as the leather breaks in
- closure
- Top zip-around closure with gold-toned metal zipper and leather pull tab
- key ring clasp
- Attached leather strap with a metal dog clip for securing inside a larger bag or to a key ring
- material feel
- Smooth, slightly glossy full-grain leather with a fine grain, not pebbled
- durability
- Full-grain leather develops patina and resists permanent wear when maintained, but corners and zipper edges show abrasion first
- care instructions
- Wipe spills off immediately; for harder stains, use a professional leather specialist
- cleaning warnings
- Do not bleach, iron, tumble dry, or professionally clean
- lining care
- Beige fabric lining spot-cleans with a soft cloth dampened with mild soapy water, then air dry
- leather conditioning
- Use a neutral leather conditioner sparingly; tinted creams matched to burgundy help maintain color
- sun/heat exposure
- Keep away from direct sunlight and strong heat to prevent drying, stiffness, cracking, and fading
- styling
- Burgundy leather with gold hardware and a subtle RL logo gives a polished, classic look
- construction
- Even tonal stitching, painted edge trim, and exposed gold zipper teeth with burgundy tape
- suitable uses
- Ideal for carrying a few cards, folded bills, and coins in a small bag or pocket
- tradeoffs
- Slim design limits capacity; overstuffing card slots can stretch or rip the leather
- value
- At 110 CAD, it offers genuine leather construction and brand recognition at a mid-range price
- comparison
- Lauren Ralph Lauren leather line is described as durable and smooth, with firm zippers
- comparable product guidance
- Similar zip card holders warn against overloading slots and contact with water, oils, makeup, and perfume
- color
- Burgundy
Product record
- Title
- Burgundy Leather Zipped Card Holder
- Brand
- Lauren Ralph Lauren
- Price
- 110 CAD
- Availability
- In stock
Buying Guide
1 comparison · 10 sourcesUses
A slim leather card case for everyday errands and quick outings
For days when a full wallet is more than you need, this low-profile burgundy leather card holder carries your cards in multiple interior slots plus one external front slot, with a zip pocket for coins. An inner key ring clasp lets you keep keys attached, and the zipped closure keeps everything contained in the genuine leather case.[1,2,3,4]
Keeping coins in one place
This leather card holder includes a zip change pocket, so coins stay contained instead of loose at the bottom of a bag. It also has multiple card slots for everyday carrying.[1]
Keeping keys together with your cards
This burgundy leather card holder has an inner key ring clasp, so you can attach your keys inside and carry them along with your cards and change. It keeps everyday essentials together in one zipped piece.[1]
Product comparison
Compared within this brand.
| Burgundy Leather Zipped Card Holder: Choose this if you want a compact, genuine cow-leather card holder that keeps essentials organized with multiple card slots, an external front slot, and a zip change pocket. The burgundy design adds an inner key ring clasp with a gold lobster-clasp strap, gold-toned zipper hardware, and a low-profile size of about 13.5 cm wide by 7.5 cm tall and 1.5 cm deep, so it slips easily into a bag. Note it is a slim card holder rather than a full wallet, and the interior has a fabric lining.[1,2,3,4] | Brown Leather Zipped Card Holder: Choose this if you want a compact, genuine-leather card holder made of 100% cow leather, sized about 5.25 inches long by 3 inches high in a Hazelnut brown with one-size fit. It suits anyone who needs multiple card slots plus a zippered change pocket, secured with an inner snap hook closure and a gold-toned top zip finished with a matching leather pull tab. Note that the interior lining is 100% polyester rather than leather.[5,6,7] | Solid Zipped Leather Card Holder: Choose this if you want a slim, flat everyday card case made of 100% cow leather with a polyester lining. It offers multiple card slots—including exterior front and vertical slots on the left side—plus a zip change pocket closed by a gold-tone metal zipper with a leather pull tab, in a compact 5.25 inch by 3 inch by 0.5 inch profile. It comes in Black, Brown, Navy/Midnight Blue, and Red, so it suits shoppers who prefer a compact zip-closed alternative to a full wallet.[8,9,10] |
Image Analysis
3 images- 01
Product
Front-facing view of a rectangular burgundy leather zipped card holder with a top-right curved zip, an external front card slot, visible tonal stitching, and a small gold metal 'RL' logo centered on the front panel.
- Overall shapeRectangular horizontal card holder seen from the front with a rounded top-right corner where the zipper curves, and a straight bottom edge.
1 region
x 0.03 · y 0.36 · w 0.94 · h 0.49 (high) - Material and finishSmooth, slightly glossy leather surface across the front panel with fine visible grain and even finish.
1 region
x 0.12 · y 0.42 · w 0.76 · h 0.38 (high) - Front card slotSingle external card slot across the upper third of the front panel, formed by a stitched horizontal seam and a slim exposed pocket opening.
1 region
x 0.08 · y 0.44 · w 0.84 · h 0.11 (high) - Decorative logoSmall gold metal 'RL' monogram attached near the vertical and horizontal center of the front panel.
1 region
x 0.48 · y 0.53 · w 0.05 · h 0.07 (high) - Zipper placementTop-mounted zipper that starts near the left-top edge and curves down along the right edge to form a zip-around corner.
1 region
x 0.06 · y 0.33 · w 0.88 · h 0.14 (high) - Zipper hardware and pullGold-toned metal zipper teeth and slider with a short burgundy leather pull tab attached to the slider.
1 region
x 0.08 · y 0.31 · w 0.17 · h 0.10 (high) - Edge trim and stitchingVisible tonal stitching around the perimeter and a darker painted edge along the left, bottom and right sides; stitching is evenly spaced and matches the leather color.
1 region
x 0.04 · y 0.36 · w 0.92 · h 0.48 (high)
Other
Studio product shot on a neutral light grey background with soft shadow below. The product is centered and cropped with full frontal visibility; lighting is even with minimal reflections.
- Background and stagingEven light grey background occupying the full frame, providing high contrast with the product.
- ShadowSoft, narrow shadow visible directly beneath the product suggesting overhead lighting.
1 region
x 0.18 · y 0.78 · w 0.64 · h 0.08 (medium) - Shot compositionProduct is centered horizontally and placed in the lower half of the image with generous empty space above.
Colors
deep burgundy· main leather bodywarm gold· zipper hardwaredark burgundy· leather pull tab and trimpolished gold· metal logovery dark brown· edge paint- Overall shapeRectangular horizontal card holder seen from the front with a rounded top-right corner where the zipper curves, and a straight bottom edge.
- 02
Product
Rectangular horizontal burgundy leather zipped card holder shown flat with the zippered edge at the top and rounded top-left corner; visible vertical card slots on the left side and stitched edges around the perimeter.
- Overall shapeLow-profile rectangular wallet with a rounded top-left corner and mostly straight edges on the other three corners; oriented horizontally with the long edge parallel to the image bottom.
1 region
x 0.03 · y 0.48 · w 0.94 · h 0.38 (high) - Material and finishSmooth burgundy leather surface with a fine, slightly matte grain visible across the main panels.
1 region
x 0.12 · y 0.52 · w 0.70 · h 0.32 (high) - Top zipper and pullMetal zipper runs along the top edge and curves down the left side; gold metal zipper slider visible at the top-right with a burgundy leather tab attached as the pull.
1 region
x 0.68 · y 0.46 · w 0.28 · h 0.14 (high) - Zipper teeth detailExposed zipper teeth visible along the curved top-left area, matching the gold-toned slider hardware.
1 region
x 0.03 · y 0.45 · w 0.30 · h 0.10 (high) - Card slot setCluster of vertical card slots scored into the leather at the left half of the front face; several narrow card slot openings separated by stitched or embossed card dividers.
1 region
x 0.03 · y 0.52 · w 0.26 · h 0.30 (high) - Edge stitchingSingle line of tonal stitching follows the outer perimeter, visible along the bottom edge and right edge.
2 regions
x 0.03 · y 0.78 · w 0.94 · h 0.06 (high); x 0.89 · y 0.52 · w 0.08 · h 0.34 (medium)
Other
Studio product shot on a neutral light-gray background; soft shadow below the product; even front lighting with minimal reflections; image crops include full width of the wallet and space above.
- Background and stagingPlain light-gray seamless background with a soft drop shadow under the wallet separating it from the surface.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (medium) - Lighting and reflectionsEven diffuse frontal lighting with a mild specular highlight on the zipper pull and slight sheen on the leather surface.
1 region
x 0.68 · y 0.46 · w 0.28 · h 0.14 (medium) - Shot compositionProduct centered horizontally in frame with generous empty space above; photographed flat and parallel to the image plane.
1 region
x 0.03 · y 0.48 · w 0.94 · h 0.38 (high)
Colors
deep burgundy· main body leatherwarm gold metallic· zipper hardwaredeep burgundy· zipper pull- Overall shapeLow-profile rectangular wallet with a rounded top-left corner and mostly straight edges on the other three corners; oriented horizontally with the long edge parallel to the image bottom.
- 03
Product
Close-up of the burgundy leather zipped card holder showing the smooth leather body, gold metal logo and hardware, dual gold zipper teeth with burgundy tape, visible beige fabric interior, stitched edges, and a leather strap terminating in a gold swivel lobster clasp.
- Leather bodySmooth burgundy leather panel with light sheen and rounded corner visible at the top right; leather shows neat topstitching near the flap edge and painted black edge trim.
1 region
x 0.06 · y 0.02 · w 0.72 · h 0.56 (high) - Metal logoSmall gold metal interlocked letters emblem mounted centered on the leather flap; emblem sits flush on the leather surface.
1 region
x 0.43 · y 0.19 · w 0.08 · h 0.06 (high) - Zipper teethExposed gold metal zipper teeth visible along the card holder perimeter; teeth are pair of parallel rows following the curved edge.
1 region
x 0.05 · y 0.54 · w 0.74 · h 0.32 (high) - Zipper tapeBurgundy fabric zipper tape that matches the leather color runs directly beneath the metal teeth.
1 region
x 0.14 · y 0.62 · w 0.62 · h 0.18 (high) - Interior fabricBeige woven fabric lining is visible inside the open zipper channel beneath the zipper teeth.
1 region
x 0.23 · y 0.64 · w 0.48 · h 0.20 (high) - Leather strapNarrow burgundy leather strap emerges from the zipper area and is looped through the hardware; strap edge shows same painted black trim.
1 region
x 0.63 · y 0.62 · w 0.18 · h 0.28 (high) - Swivel lobster claspPolished gold swivel lobster clasp attached to the leather strap, showing spring-loaded hook and a small pivoting latch arm.
1 region
x 0.68 · y 0.68 · w 0.26 · h 0.30 (high) - Stitching detailEven, single-line topstitching in matching burgundy thread runs along the flap and perimeter seams visible in the close-up.
1 region
x 0.06 · y 0.12 · w 0.72 · h 0.40 (high) - Edge bevel and trimRounded edge with a thin black painted trim where the leather panels meet, visible along the flap and near the zipper.
1 region
x 0.36 · y 0.18 · w 0.55 · h 0.48 (high)
Other
Studio-style close-up on a light neutral background with soft even lighting and subtle shadow under the hardware; image is cropped to show detail of one corner and the clasp.
- Shot compositionDiagonal close-up crop showing the top-right corner of the card holder and the lower-right clasp area; product fills most of the frame.
- BackgroundUniform light gray background with no visible props or packaging elements.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (low) - Lighting and shadowSoft diffused lighting with gentle highlights on the leather and metal; subtle soft shadow beneath the clasp and along the product edges.
Colors
deep burgundy· leather body#5C252Dpolished gold· metal hardwarelight beige· interior lining#BCBCBCburgundy· zipper tape#4B341C- Leather bodySmooth burgundy leather panel with light sheen and rounded corner visible at the top right; leather shows neat topstitching near the flap edge and painted black edge trim.