Simons
Two-Tone Triple Ring
This Simons-exclusive bracelet is a two-tone triple ring crafted from brass, featuring three polished interlocked bands in alternating silver-tone and gold-tone finishes. It is designed to be worn as a single stacked-ring accessory on one finger. Key specification: thickness of 10 mm.
- Color
- Two-Tone
- Material
- Brass
- Category
- Apparel & Accessories > Jewelry > Rings
Color
Specifications
Two-tone triple ring made of brass with 10 mm thickness.
Triple ring design, brass material, 10 mm thickness
- Color
- Two-Tone
- Material
- Brass
- Gender
- female
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Rings
Additional Attributes
- triple ring design
- two-tone finish
- brass construction
- 10 mm thickness
Product Insights
The Two-Tone Triple Ring from Simons is a 29 CAD in-stock, fixed two-tone finish ring in cast brass with gold-tone plating, built as a single fused 10 mm triple-band piece rather than three separate rings, so the bands do not roll independently like a Cartier Trinity and merge into one smooth shank at the back; it is offered only in whole sizes 6, 7, and 8, with no half sizes or adjustable band and no upcharge for the larger sizes. Its central tradeoff is the wide fused face: at 10 mm it presses on about five times a 2 mm ring's finger area, fits tighter than slim rings, and cannot be spread to relieve pressure, so a size taken on a slim gauge lands 1-2 sizes small and should be measured on a wide gauge; size to the knuckle because a base-fit 10 mm band will not pass over a joint that runs about 2 mm wider than the base. The same size feels tighter than a narrow ring, a flat interior binds at the knuckle where a domed one glides, the face reaches the finger-base crease and can pinch on a fist or grip, and covering 10 mm of finger traps warmth and moisture so the band feels tighter as the day runs on. Durability is plating-bound: the brass is the standard affordable base metal rather than a gold alloy, both tones last 6-18 months in light wear to 3-7 years in heavy wear, the finish wears first where the band rubs, and the colors hold only as long as the plated layer; maintenance is removing before water, wiping dry after each wear, storing airtight, and polishing out light tarnish. The two-tone gold-to-silver contrast is fixed across sizes and not selectable, but it varies by production lot, so a repeat order may not match exactly.
Verified claims
- Ring width
- At 10 mm wide the band presses on about five times a 2 mm ring's finger area, so it fits tighter than slim rings.
- Sizing
- A size taken on a slim gauge lands 1-2 sizes small on this fixed 10 mm band, so measure on a wide gauge.
- Size availability
- Offered only in whole sizes 6, 7 and 8 with no half sizes or adjustable band, and each size is in stock.
- Knuckle clearance
- Size to the knuckle: where the joint runs about 2 mm wider than the base, a base-fit 10 mm band will not pass over.
- Fit
- Same size feels tighter than a narrow ring, and a flat interior binds at the knuckle where a domed one glides.
- Grip
- The 10 mm face reaches the finger-base crease and can pinch on a fist or a grip.
- Heat retention
- Covering 10 mm of finger traps warmth and moisture, so the band feels tighter as the day runs on.
- Price parity
- All three sizes are 29 CAD with no upcharge for the larger bands.
- Ring structure
- A single fused piece, not three separate rings — the bands don't roll independently.
- Band motion
- Bands are permanently fused and do not rotate independently like a Cartier Trinity.
- Pressure distribution
- The fused 10 mm face presses as one wide band, not three, so it can't be spread to relieve pressure.
- Maintenance
- Remove before water, wipe dry after each wear, and store the ring airtight; light tarnish polishes out.
- Finish durability
- The finish wears first where the band rubs, and the colors hold only as long as the plated layer lasts.
- Two-tone consistency
- The gold-to-silver contrast varies by production lot, so a repeat order may not match exactly.
- Base metal
- Cast brass, the standard base metal for affordable gold-tone jewelry rather than a gold alloy.
- Plating durability
- How long both tones last is set by the plating, not the brass: 6-18 months light to 3-7 years heavy.
- Color consistency
- Two-tone contrast can vary between production lots, so a reorder may not match the original exactly.
- Shank
- The three bands merge into one smooth shank at the back, fused so they never roll against the finger.
- Brass alloy
- A gold-tone plating over a cast-brass body — the standard build for affordable two-tone jewelry.
- Colorway
- The Assorted two-tone finish is fixed across sizes 6, 7 and 8, though the exact gold-silver split varies by unit.
- Colorways
- The two-tone finish is fixed across sizes 6, 7, and 8 — it is not selectable.
Product record
- Title
- Two-Tone Triple Ring
- Brand
- Simons
- Price
- 29 CAD
- Availability
- In stock
Buying Guide
1 comparison · 7 sourcesProduct comparison
Compared within this brand.
| Two-Tone Triple Ring: Choose this if you want a Simons-exclusive statement ring made of brass that stacks three interlocked, polished tubular bands in a mixed silver-tone and gold-tone design, linked by small matching-tone connectors with a 10 mm thickness and rounded edges. It comes in sizes 6, 7, and 8, and works well if you like a two-tone look with a decorative looped knot detail at the top. Note that the material is brass, so care instructions for brass composition apply.[1,2,3] | Three-Hoop Ring: Choose this if you want a bold statement ring: it is a gold-plated brass ring with three interlocking, smoothly rounded hoop bands in a polished, high-gloss gold-tone finish, with a 1 cm width. It comes in sizes 7 and 8 in an Assorted color listing. Note that the gold-tone and glossy finish descriptions come from image analysis rather than manufacturer specifications.[4,5] | Two-Hoop Ring: Choose this if you want a statement ring with a modern double-band look: it is a brass ring in silver with two parallel tubular hoops joined by small interior connector bars, an 8 mm width, and a high-gloss reflective finish with smooth, rounded profiles and no visible stones or engravings. It comes in sizes 7 and 8, so it suits shoppers within that range who prefer a polished, unadorned design.[6,7] |
Image Analysis
2 images- 01
Product
A stack of three interlocked metal rings presented as a single triple-ring piece; rings alternate between a bright silver-tone and a warm gold-tone with smooth, polished finishes.
- Overall geometryThree separate round band loops are intertwined and stacked to form one compact triple-ring assembly; bands have consistent circular cross-sections and rounded edges.
1 region
x 0.28 · y 0.48 · w 0.44 · h 0.20 (high) - Two-tone arrangementOne or two bands are a bright silver-tone and one or two bands are a warm gold-tone, arranged so gold bands loop through and sit partially above the silver bands at the top right.
2 regions
x 0.30 · y 0.50 · w 0.30 · h 0.15 (high); x 0.45 · y 0.48 · w 0.25 · h 0.18 (high) - Finish and surfaceBands have highly reflective, polished metal surfaces producing specular highlights and soft reflections of the studio lighting.
1 region
x 0.34 · y 0.49 · w 0.32 · h 0.16 (high) - Top knot detailA small looped end of a gold-tone band forms a visible knot or coil resting atop the front-right portion of the stack.
1 region
x 0.57 · y 0.44 · w 0.10 · h 0.10 (medium)
Other
Studio product shot on a plain light background with soft shadow beneath the ring; centered low in frame with even, diffused lighting and minimal props.
- Background and surfaceSmooth, uniform off-white background and surface with no visible texture or markings.
- ShadowSoft diffuse shadow cast to the lower-right of the ring, suggesting a light source from the upper-left.
1 region
x 0.53 · y 0.55 · w 0.22 · h 0.12 (high) - Shot compositionProduct is photographed close-up and placed slightly below the vertical center of the image with generous negative space above.
- Image qualitySharp focus on the rings with clear specular highlights; no visible text or labels in the scene.
1 region
x 0.28 · y 0.46 · w 0.44 · h 0.24 (high)
Colors
polished silver· silver-tone bands#C6C2BCwarm gold· gold-tone bands#BBB5AB- Overall geometryThree separate round band loops are intertwined and stacked to form one compact triple-ring assembly; bands have consistent circular cross-sections and rounded edges.
- 02
Product
Three polished tubular metal rings linked in a row; two outer rings are silver-toned and the center ring is gold-toned. Each large ring is connected by a smaller matching-tone link that passes through adjacent large rings.
- Left large ringRounded, tubular silver-toned ring with a smooth high-gloss polished finish; appears as the nearest, mostly visible ring on the lower-left of the frame and casts a soft shadow on the white surface.
1 region
x 0.02 · y 0.54 · w 0.48 · h 0.38 (high) - Center large ringRounded, tubular gold-toned ring with a smooth high-gloss polished finish; sits centered in the image and is interlocked with small links on each side.
1 region
x 0.30 · y 0.36 · w 0.48 · h 0.44 (high) - Right large ring (partial)Rounded, tubular silver-toned ring with the same polished finish as the left ring; only the left portion of this ring is visible at the top-right edge of the frame.
1 region
x 0.66 · y 0.04 · w 0.34 · h 0.28 (high) - Small interlink between left and centerSmall silver-toned circular link passing through both the left silver ring and the center gold ring, with the same polished finish.
1 region
x 0.24 · y 0.52 · w 0.12 · h 0.12 (medium) - Small interlink between center and rightSmall gold-toned circular link passing through the center gold ring and the right silver ring, reflecting light similarly to the larger rings.
1 region
x 0.61 · y 0.30 · w 0.12 · h 0.12 (medium) - Surface reflections and highlightsStrong specular highlights and mirror-like reflections visible on all metal surfaces, indicating a highly polished finish; highlights vary with the ring curvature.
- ShadowsSoft, diffuse shadows cast by the rings onto the white surface beneath, giving slight depth and indicating overhead diffuse lighting.
Other
Studio-style product shot on a plain white background with even, diffuse lighting and minimal props; image is cropped so the rightmost ring is partially outside the frame.
- BackgroundUniform white background and surface with no visible texture or pattern.
- Shot compositionDiagonal arrangement of the linked rings from lower-left to upper-right; rightmost ring is cropped at the frame edge.
- LightingEven, soft studio lighting producing clear specular reflections on metal and soft shadows beneath the rings.
- Image qualityHigh-resolution, sharply focused on the rings; no visible noise or compression artifacts.
Colors
polished silver· silver rings#CDCBC4polished gold· gold ring#D4BA93- Left large ringRounded, tubular silver-toned ring with a smooth high-gloss polished finish; appears as the nearest, mostly visible ring on the lower-left of the frame and casts a soft shadow on the white surface.