Simons
Two-Tone Triple Ring
This Simons-exclusive bracelet is a two-tone triple ring crafted from brass, featuring three polished interlocked bands in alternating silver-tone and gold-tone finishes. It is designed to be worn as a single stacked-ring accessory on one finger. Key specification: thickness of 10 mm.
- Color
- Two-Tone
- Material
- Brass
- Category
- Apparel & Accessories > Jewelry > Rings
Color
Specifications
Two-tone triple ring made of brass with 10 mm thickness.
Triple ring design, brass material, 10 mm thickness
- Color
- Two-Tone
- Material
- Brass
- Gender
- female
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Rings
Additional Attributes
- triple ring design
- two-tone finish
- brass construction
- 10 mm thickness
Product Insights
The Simons Two-Tone Triple Ring is a 29 CAD in-stock, fixed two-tone design offered in whole sizes 6, 7 and 8 only, with no half sizes or adjustable band and no upcharge for the larger sizes. It reads as a triple ring but is a single fused 10 mm piece whose bands never rotate independently, merging into one smooth shank; that fused width presses like one wide band across roughly five times the finger area of a 2 mm ring, so it fits tighter, traps warmth and moisture, reaches the finger-base crease, can pinch on a fist or a grip, and cannot be spread to relieve pressure. Sizing must be taken on a wide gauge because a slim-gauge size lands 1-2 sizes small, and where the knuckle runs about 2 mm wider than the base a base-fit 10 mm band will not pass over; the flat interior also binds at the knuckle where a domed band would glide. The build is gold-tone plating over cast brass with a fine-gold interlayer between brass and bright nickel to reduce galvanic corrosion, and how long the two tones last is set by the plating, 6-18 months light to 3-7 years heavy, with finish wearing first where the band rubs, colors holding only as long as the plated layer, lot-to-lot gold-to-silver contrast variation, and required removal before water, drying after wear, airtight storage, and light tarnish polishing.
Verified claims
- Ring width
- At 10 mm wide the band presses on about five times a 2 mm ring's finger area, so it fits tighter than slim rings.
- Sizing
- A size taken on a slim everyday ring or a strip of string reads too small for this fixed 10 mm band, which is offered only in whole sizes 6, 7, and 8 with no adjustable band; validate the size on a width-matched finger gauge rather than converting from a slim-band number.
- Size availability
- Offered only in whole sizes 6, 7 and 8 with no half sizes or adjustable band, and each size is in stock.
- Knuckle clearance
- Size to the knuckle: where the joint is markedly wider than the finger base, no single fixed circumference among sizes 6, 7, or 8 will both clear the joint and sit snugly below it.
- Fit
- Same size feels tighter than a narrow ring, and the fused triple band sits against the finger as one smooth, broad shank rather than three loose edges.
- Grip
- The 10 mm face reaches the finger-base crease and can pinch on a fist or a grip.
- Heat retention
- Covering 10 mm of finger traps warmth and moisture, so the band feels tighter as the day runs on.
- Price parity
- All three sizes are 29 CAD with no upcharge for the larger bands.
- Ring structure
- A single fused piece, not three separate rings — the bands don't roll independently.
- Band motion
- Bands are permanently fused and do not rotate independently like a Cartier Trinity.
- Shank
- The three bands merge into one smooth shank at the back, fused so they never roll against the finger.
- Pressure distribution
- The fused 10 mm face presses as one wide band, not three, so it can't be spread to relieve pressure.
- Plating durability
- How long both tones last is set by the plating, not the brass: 6-18 months light to 3-7 years heavy.
- Finish durability
- The finish wears first where the band rubs, and the colors hold only as long as the plated layer lasts.
- Two-tone consistency
- The gold-to-silver contrast varies by production lot, so a repeat order may not match exactly.
- Brass alloy
- A gold-tone plating over a cast-brass body — the standard build for affordable two-tone jewelry.
- Maintenance
- Remove before water, wipe dry after each wear, and store the ring airtight; light tarnish polishes out.
- Colorway
- The two-tone finish is fixed across sizes 6, 7, and 8 — it is not selectable.
- Skin sensitivity
- The brass base is naturally nickel-free, but the two-tone plated finish may contain nickel, so the ring is not guaranteed nickel-free for very sensitive skin; the copper in the brass can also leave a harmless greenish mark when it reacts with sweat and skin acids.
Product record
- Title
- Two-Tone Triple Ring
- Brand
- Simons
- Price
- 29 CAD
- Availability
- In stock
Buying Guide
1 comparison · 7 sourcesProduct comparison
Compared within this brand.
| Two-Tone Triple Ring: Choose this if you want a Simons-exclusive statement ring made of brass that stacks three interlocked, polished tubular bands in a mixed silver-tone and gold-tone design, linked by small matching-tone connectors with a 10 mm thickness and rounded edges. It comes in sizes 6, 7, and 8, and works well if you like a two-tone look with a decorative looped knot detail at the top. Note that the material is brass, so care instructions for brass composition apply.[1,2,3] | Three-Hoop Ring: Choose this if you want a bold statement ring: it is a gold-plated brass ring with three interlocking, smoothly rounded hoop bands in a polished, high-gloss gold-tone finish, with a 1 cm width. It comes in sizes 7 and 8 in an Assorted color listing. Note that the gold-tone and glossy finish descriptions come from image analysis rather than manufacturer specifications.[4,5] | Two-Hoop Ring: Choose this if you want a statement ring with a modern double-band look: it is a brass ring in silver with two parallel tubular hoops joined by small interior connector bars, an 8 mm width, and a high-gloss reflective finish with smooth, rounded profiles and no visible stones or engravings. It comes in sizes 7 and 8, so it suits shoppers within that range who prefer a polished, unadorned design.[6,7] |
Image Analysis
2 images- 01
Product
A stack of three interlocked metal rings presented as a single triple-ring piece; rings alternate between a bright silver-tone and a warm gold-tone with smooth, polished finishes.
- Overall geometryThree separate round band loops are intertwined and stacked to form one compact triple-ring assembly; bands have consistent circular cross-sections and rounded edges.
1 region
x 0.28 · y 0.48 · w 0.44 · h 0.20 (high) - Two-tone arrangementOne or two bands are a bright silver-tone and one or two bands are a warm gold-tone, arranged so gold bands loop through and sit partially above the silver bands at the top right.
2 regions
x 0.30 · y 0.50 · w 0.30 · h 0.15 (high); x 0.45 · y 0.48 · w 0.25 · h 0.18 (high) - Finish and surfaceBands have highly reflective, polished metal surfaces producing specular highlights and soft reflections of the studio lighting.
1 region
x 0.34 · y 0.49 · w 0.32 · h 0.16 (high) - Top knot detailA small looped end of a gold-tone band forms a visible knot or coil resting atop the front-right portion of the stack.
1 region
x 0.57 · y 0.44 · w 0.10 · h 0.10 (medium)
Other
Studio product shot on a plain light background with soft shadow beneath the ring; centered low in frame with even, diffused lighting and minimal props.
- Background and surfaceSmooth, uniform off-white background and surface with no visible texture or markings.
- ShadowSoft diffuse shadow cast to the lower-right of the ring, suggesting a light source from the upper-left.
1 region
x 0.53 · y 0.55 · w 0.22 · h 0.12 (high) - Shot compositionProduct is photographed close-up and placed slightly below the vertical center of the image with generous negative space above.
- Image qualitySharp focus on the rings with clear specular highlights; no visible text or labels in the scene.
1 region
x 0.28 · y 0.46 · w 0.44 · h 0.24 (high)
Colors
polished silver· silver-tone bands#C6C2BCwarm gold· gold-tone bands#BBB5AB- Overall geometryThree separate round band loops are intertwined and stacked to form one compact triple-ring assembly; bands have consistent circular cross-sections and rounded edges.
- 02
Product
Three polished tubular metal rings linked in a row; two outer rings are silver-toned and the center ring is gold-toned. Each large ring is connected by a smaller matching-tone link that passes through adjacent large rings.
- Left large ringRounded, tubular silver-toned ring with a smooth high-gloss polished finish; appears as the nearest, mostly visible ring on the lower-left of the frame and casts a soft shadow on the white surface.
1 region
x 0.02 · y 0.54 · w 0.48 · h 0.38 (high) - Center large ringRounded, tubular gold-toned ring with a smooth high-gloss polished finish; sits centered in the image and is interlocked with small links on each side.
1 region
x 0.30 · y 0.36 · w 0.48 · h 0.44 (high) - Right large ring (partial)Rounded, tubular silver-toned ring with the same polished finish as the left ring; only the left portion of this ring is visible at the top-right edge of the frame.
1 region
x 0.66 · y 0.04 · w 0.34 · h 0.28 (high) - Small interlink between left and centerSmall silver-toned circular link passing through both the left silver ring and the center gold ring, with the same polished finish.
1 region
x 0.24 · y 0.52 · w 0.12 · h 0.12 (medium) - Small interlink between center and rightSmall gold-toned circular link passing through the center gold ring and the right silver ring, reflecting light similarly to the larger rings.
1 region
x 0.61 · y 0.30 · w 0.12 · h 0.12 (medium) - Surface reflections and highlightsStrong specular highlights and mirror-like reflections visible on all metal surfaces, indicating a highly polished finish; highlights vary with the ring curvature.
- ShadowsSoft, diffuse shadows cast by the rings onto the white surface beneath, giving slight depth and indicating overhead diffuse lighting.
Other
Studio-style product shot on a plain white background with even, diffuse lighting and minimal props; image is cropped so the rightmost ring is partially outside the frame.
- BackgroundUniform white background and surface with no visible texture or pattern.
- Shot compositionDiagonal arrangement of the linked rings from lower-left to upper-right; rightmost ring is cropped at the frame edge.
- LightingEven, soft studio lighting producing clear specular reflections on metal and soft shadows beneath the rings.
- Image qualityHigh-resolution, sharply focused on the rings; no visible noise or compression artifacts.
Colors
polished silver· silver rings#CDCBC4polished gold· gold ring#D4BA93- Left large ringRounded, tubular silver-toned ring with a smooth high-gloss polished finish; appears as the nearest, mostly visible ring on the lower-left of the frame and casts a soft shadow on the white surface.