
Simons
Shimmery Zirconia Open Gold Ring
This is an open-band gold-tone ring made of brass with a single central row of round clear cubic zirconia stones and two beaded outer edges. It is a decorative jewelry accessory worn on the finger. The band width is 5 mm (0.25 in), and the metal has a polished gold-tone finish.
- Color
- Gold
- Material
- Brass, Cubic zirconia
- Category
- Apparel & Accessories > Jewelry > Rings
Specifications
An open gold-colored ring made from brass and accented with cubic zirconia, measuring 5 mm in width.
Open ring design with cubic zirconia accents and a 5 mm width.
- Color
- Gold · yellow
- Material
- Brass, Cubic zirconia
- Gender
- female
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Rings
Additional Attributes
- open ring design
- cubic zirconia accents
- brass base metal
- gold colorway
- 5 mm band width (0.25 in)
- shimmery zirconia detailing
Product Insights
Shimmery Zirconia Open Gold Ring Brass base with cubic zirconia stones and a gold-tone finish One size only and one variant offered; the open gap may add some wiggle room, but the ring still needs to be close to the wearer's size If adjustment is intended, take the ring off the finger, hold the smooth metal ends and move them only 1–2 mm at a time, pressing on the plain metal rather than the stone-set area Brass tarnishes when copper reacts with air and moisture, and the gold-tone plating can wear thin or scratch, exposing the base metal; keeping the ring clean and dry is the best defense At 19 CAD, this is affordable fashion jewelry: brass and cubic zirconia with a gold-tone finish, sold in one size, so the value depends on accepting the care and finish-life tradeoffs
Verified claims
- materials
- Brass base with cubic zirconia stones and a gold-tone finish
- construction
- Open band with a visible gap, beaded outer edges, a central row of clear faceted stones and a polished gold-tone finish
- width
- Band width: 5 mm (0.25 in)
- sizing
- One size only and one variant offered; the open gap may add some wiggle room, but the ring still needs to be close to the wearer's size
- adjustability
- Open construction does not automatically mean the ring is adjustable; do not force the ends apart or together unless the product is described as adjustable or flexible
- adjustment method
- If adjustment is intended, take the ring off the finger, hold the smooth metal ends and move them only 1–2 mm at a time, pressing on the plain metal rather than the stone-set area
- adjustment limit
- Open bands are generally safe within about one ring size either way; larger changes can distort the shape or crack the plating
- durability
- Repeatedly bending the band back and forth weakens the metal and can crack brass or its plating, with stone settings often showing stress first
- repair
- The gap cannot be permanently closed at home; soldering it shut would heat the band and risk damaging the plating and stones
- comfort
- The open design can feel lighter and slightly flexible, but the terminals should not press sharply into the finger or rotate so the gap sits uncomfortably
- activity care
- Open ends and raised stones can catch on knitwear and fine fabrics, so remove the ring for gym, cleaning, heavy lifting, sauna and other tasks that put strong pressure on the band
- cleaning
- Clean the gold-tone brass gently with a soft cloth and no abrasives; for cubic zirconia sparkle, occasional warm soapy water and a soft brush are suitable, but keep water and chemical exposure limited and dry thoroughly
- storage
- Store in an anti-tarnish bag or padded space, separately from other jewelry, so the terminals do not catch on chains or rub against harder pieces
- material behavior
- Brass tarnishes when copper reacts with air and moisture, and the gold-tone plating can wear thin or scratch, exposing the base metal; keeping the ring clean and dry is the best defense
- skin reaction
- Brass contains copper, which can rarely leave a harmless green or black mark on skin when it reacts with sweat and acids; moisture control reduces the chance, and the residue commonly washes off with mild soap and warm water
- care tip
- A thin layer of clear nail polish or jeweler coating on the inside surface can create a barrier against green marks, but it wears off within a few weeks and needs reapplying
- stone setting
- Cubic zirconia has a hardness around 8.5 and resists scratching or chipping during normal setting, though excessive pressure on the girdle edge should be avoided; more enclosed settings protect the stone better than exposed prongs
- styling
- The open gold-tone band, beaded edges and clear cubic zirconia row create a modern, airy look that suits minimalist or artistic styling; warm gold tones generally complement warmer skin undertones
- use
- Best for light everyday wear and non-manual settings; compared with a closed band, the open design is airier and can feel slightly more flexible, but it needs more care and is more likely to catch or bend
- value
- At 19 CAD, this is affordable fashion jewelry: brass and cubic zirconia with a gold-tone finish, sold in one size, so the value depends on accepting the care and finish-life tradeoffs
Product record
- Title
- Shimmery Zirconia Open Gold Ring
- Brand
- Simons
- Price
- 19 CAD
- Availability
- In stock
Buying Guide
1 comparison · 7 sourcesUses
Fine-tuning the fit of an adjustable open ring
This open zirconia ring can be sized at home by gently easing its ends apart or together in small steps, never while wearing it. Because its band is only 5 mm wide and stone-set, the source advises stopping before you feel clear resistance and pressing only on the smooth metal ends, since the stone-set area is the ring's most sensitive spot. Once it fits well, leave the adjustment as is rather than repeatedly bending it back and forth.[1]
Fine-tuning an open ring for a secure, comfortable fit
This open ring can be gently bent at its smooth ends in small steps to make it slightly looser or tighter, so it sits securely but still slides over the knuckle without effort. Because the band is set with cubic zirconia, pressure should go on the plain metal rather than the stone-set section. Once the fit feels right, the adjustment is done and the ring should be left as is rather than repeatedly opened and squeezed.[1]
Product comparison
Compared within this brand.
| Shimmery Zirconia Open Gold Ring: Choose this if you want a dainty open band in a polished gold-tone finish, featuring a central row of clear faceted cubic zirconia stones framed by beaded edges, at a slim 5 mm (0.25 inches) width. It comes in a single ONE SIZE gold variant, so the open design allows gentle adjustment, but since it is a narrow band it should be opened carefully and in small steps, stopping before you feel resistance; the setting is brass, not solid gold, and the listing does not provide care instructions.[1,2,3] | Small Stone Openwork Ring: Choose this if you want a delicate, gold-tone double-band ring with an open space across the front, small prong-set clear stones in marquise and baguette shapes, and tiny beaded metal accents. It features cubic zirconia on gold-plated brass with a polished, reflective finish, and is offered in a size 7 variant in an Assorted color. Note that the metal is plated rather than solid gold, and the listed 6 mm width does not specify whether it refers to the band or the stone.[4,5] | Mini-Stone Double-Like Wavy Ring: Choose this if you want a low-profile gold-tone ring with a gentle wavy top edge, featuring two parallel rows of small cubic zirconia stones that catch highlights along the outer band. It is gold-plated brass with a smooth polished inner band and a slim 3 mm width, offered in sizes 6 and 7. Note that care instructions are not provided on the product page, so handling guidance is unavailable.[6,7] |
Image Analysis
1 images- 01

Product
A single open gold-tone ring shown flat on a white background. The ring has two beaded outer edges and a central row of clear faceted stones set along the band; the band is open (split) at one point.
- Overall shapeOpen circular band photographed lying flat with a visible open gap on the right side; the band forms a near C-shape in the image plane.
1 region
x 0.28 · y 0.58 · w 0.44 · h 0.19 (high) - Edge beadingTwo raised rows of small rounded bead-like metal elements run along both outer edges of the band, creating a textured border.
1 region
x 0.30 · y 0.60 · w 0.40 · h 0.14 (high) - Central stone rowA single central row of closely set clear faceted stones runs along the band between the beaded edges; stones are round and individually visible.
1 region
x 0.33 · y 0.62 · w 0.34 · h 0.10 (high) - Inner band detailInner face of the band shows rectangular openings or settings behind each stone, visible along the inner curve at the top of the ring.
1 region
x 0.37 · y 0.56 · w 0.22 · h 0.07 (high) - FinishMetal surface has a polished reflective gold-tone finish visible on beads and inner band surfaces.
1 region
x 0.30 · y 0.60 · w 0.40 · h 0.14 (high)
Other
Studio product shot on a plain white background with soft shadow on the lower-right of the ring; even diffuse lighting with minimal reflections.
- Background and surfaceSmooth white background and flat surface occupying the full image, providing a clear shadow under the ring.
- ShadowSoft diffuse shadow projects slightly down and to the right from the ring, indicating light from upper-left.
1 region
x 0.48 · y 0.64 · w 0.20 · h 0.10 (high) - Shot compositionRing is centered horizontally and placed in the lower third of the frame with ample empty space above.
- Image qualityHigh-resolution studio image with clear detail and minimal noise; highlights visible on metal and stones.
Colors
warm gold· band and beaded edgesclear crystal· central stones- Overall shapeOpen circular band photographed lying flat with a visible open gap on the right side; the band forms a near C-shape in the image plane.