
Simons
Interlaced Link Open Ring
This open ring is a brass fashion ring set with clear cubic zirconia stones, measuring 10 mm (0.5") in width. The design consists of two split bands that interlace into a flat knot at the front, with one band channel-set with rectangular baguette-cut stones and the other band pavé-set with small round faceted stones; the rear remains open with a gap between the band ends. It is worn as a decorative accessory on the finger, and the polished yellow-gold-tone finish is applied to the brass base.
- Material
- Brass, Cubic zirconia
- Category
- Apparel & Accessories > Jewelry > Rings
Specifications
Open link ring crafted in brass with cubic zirconia accents and a 10 mm width.
Interlaced link motif, open ring design, cubic zirconia accents, 10 mm width.
- Material
- Brass, Cubic zirconia
- Secondary
- stone
- Gender
- female
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Rings
Additional Attributes
- Interlaced link design
- Open ring silhouette
- Brass construction
- Cubic zirconia accents
- 10 mm (0.5") width
Product Insights
Brass with cubic zirconia accents Two split bands interlace into a front knot with mixed stone cuts Open rear means a non-standard fit Brass will patina progressively; humidity and handling matter CZ can yellow and scratch over time Affordable fashion jewellery with design-led construction
Verified claims
- category
- Jewelry ring
- material
- Brass with cubic zirconia accents
- color
- Gold-tone brass with clear stones
- size
- One size only
- dimensions
- 10 mm at widest point, not a uniform band width
- design
- Two split bands interlace into a front knot with mixed stone cuts
- fit
- Open rear means a non-standard fit
- comfort
- Front-heavy width may affect feel
- material behavior
- No plated layer to flake; brass colour will change
- care
- Brass will patina progressively; humidity and handling matter
- gemstone durability
- CZ is hard but not diamond-hard
- gemstone aging
- CZ can yellow and scratch over time
- durability
- Brass is not a very strong material; thin sections can break
- cleaning
- Openwork knot and settings need reachable cleaning
- finish
- Polished surfaces, but internal cavities may be unreachable
- styling
- Warm gold tone with mixed stone cuts for a dressy statement
- best uses
- Better for occasional wear if you want to preserve the finish
- value
- Affordable fashion jewellery with design-led construction
- comparison
- Unplated brass versus plated brass and CZ versus diamond
- gender
- Women's
- variant
- Single variant: gold/clear, one size
Product record
- Title
- Interlaced Link Open Ring
- Brand
- Simons
- Price
- 25 CAD
- Availability
- In stock
Buying Guide
1 comparison · 6 sourcesProduct comparison
Compared within this brand.
| Interlaced Link Open Ring: Choose this if you want a gold-and-clear open ring made of brass and cubic zirconia, with two split bands that interlace into a central knot—one channel-set with rectangular baguette stones and the other lined with small pavé-style round stones. It has a 10 mm (0.5 inch) width and comes in one size only, so it suits shoppers with a comfortable one-size fit. Note that care instructions are unavailable on the listing.[1,2] | Interlaced Open Ring: Choose this if you want a brass open ring with a statement front detail—three parallel tubular bands woven into a knot-like loop with a highly polished, reflective finish and a listed width of 10 mm. It comes in sizes 6 and 7 in Silver or Assorted colorways, and its open back with separated band ends appears adjustable, though that is inferred from the visible gap rather than confirmed. The gap at the back means the band does not form a closed circle, so it suits those comfortable with an open-ended design.[3,4] | Sinuous Band Ring: Choose this if you want an elaborate, feminine silver-tone ring with a sinuous multi-row look: three interlaced bands combining a polished strand, a pave row of small clear cubic zirconia, and a beaded texture. It is made of brass and cubic zirconia with a listed width of 1 cm. Note it comes in a single one-size fit and the page does not provide care instructions.[5,6] |
Image Analysis
1 images- 01

Product
A gold-tone open ring with two split bands that interlace into a central knot; one band is channel-set with rectangular baguette stones and the outer band is set with small round stones. The ring is shown flat on its outer face with the open ends visible.
- Overall shapeOpen circular ring composed of two parallel bands that separate at the back and interlace into a knot-like loop at the front; pictured from a slightly elevated front-facing angle showing the ring's outer surface and the open gap at the rear.
1 region
x 0.25 · y 0.45 · w 0.50 · h 0.25 (high) - Interlaced knot detailFront center formed by one band looping under and through the other to create a flat interlaced knot with visible inner negative space where the loop crosses.
1 region
x 0.32 · y 0.53 · w 0.36 · h 0.20 (high) - Baguette stone channelOne of the split bands features a row of rectangular baguette-cut clear stones set end-to-end in a channel that follows the curvature of the loop and the forward band.
1 region
x 0.35 · y 0.52 · w 0.34 · h 0.12 (high) - Pavé round stonesThe opposing outer band is inset with a line of small round faceted stones set closely together (pavé style) running along the visible outer edge of the band.
1 region
x 0.30 · y 0.60 · w 0.40 · h 0.10 (high) - Metal finishHighly polished warm yellow-gold metal finish visible on the bands' outer surfaces and inner faces, producing bright highlights and soft reflections.
1 region
x 0.25 · y 0.45 · w 0.50 · h 0.25 (high) - Open rearRear of the ring is open (gap between band ends) with visible inner channel and smooth inner faces of the bands.
1 region
x 0.62 · y 0.48 · w 0.16 · h 0.14 (medium)
Other
Studio-shot product image on a pale neutral background with soft shadow beneath the ring and even overhead lighting; slight top-left light reflection on metal.
- Background and surfaceSmooth off-white to very light gray seamless background and surface with no visible props.
- ShadowSoft diffuse shadow cast beneath and slightly to the right of the ring, indicating a light source from the upper-left.
1 region
x 0.48 · y 0.60 · w 0.28 · h 0.18 (high) - Shot compositionRing is centered horizontally and positioned in the lower half of the frame with visible negative space above.
- Image qualitySharp focus on the ring with small specular highlights on stones and metal; no legible printed text visible in the image.
Colors
warm yellow gold· metal bandsclear/transparent· stones- Overall shapeOpen circular ring composed of two parallel bands that separate at the back and interlace into a knot-like loop at the front; pictured from a slightly elevated front-facing angle showing the ring's outer surface and the open gap at the rear.