Activate 20 Oz. Insulated Shaker Bottle

Insulated shaker bottle with double-wall vacuum insulation, keeps drinks cold for 8 hours and iced for 30 hours. Features a powder compartment and rotating lid for easy mixing.

Keeps contents cold for 8 hours, iced for 30 hours. Double-wall vacuum insulation. BPA and phthalate free. Rugged food-grade stainless steel. Small-mouth rotating lid. Foldable ergonomic handle. Fits most cup holders (70 mm base). Inner dome for mixing. Base compartment for powder or snacks.

Material

Rugged food-grade stainless steel

Occasion

workout

Gender

male

Age Group

adult

Condition

new

Category

Sporting Goods > Exercise & Fitness

01

Product

Tall insulated shaker bottle photographed upright from the front showing a textured dark body, hinged carry handle at the upper right, a multi-piece lid assembly, vertical STANLEY logo on the body, and a translucent bottom compartment.

• Overall shapeTall cylindrical bottle with slight outward taper near the top and a flat circular base; proportions emphasize height over width.
  1 region

  x 0.28 · y 0.08 · w 0.44 · h 0.84 (high)
• Body material and finishMain body appears to have a matte textured finish in a dark charcoal color with a slightly pebbled surface.
  1 region

  x 0.30 · y 0.18 · w 0.40 · h 0.62 (high)
• Vertical logo“Large vertical STANLEY wordmark printed down the side of the bottle in a darker glossy tone contrasting subtly with the matte body.”
  1 region

  x 0.34 · y 0.22 · w 0.18 · h 0.56 (high)
• Lid assemblyMulti-piece lid with a wider top cap and a lower glossy band; top cap is cylindrical and finished in matte black while the joint below is glossier and reflective.
  1 region

  x 0.36 · y 0.06 · w 0.28 · h 0.14 (high)
• Carry handle and hingeThick molded carry loop attached at a metal pivot on the right side of the lid; handle sits diagonally across the upper right of the bottle and has a matte finish with a recessed rectangular panel.
  2 regions

  x 0.54 · y 0.14 · w 0.26 · h 0.22 (high); x 0.48 · y 0.12 · w 0.07 · h 0.06 (high)
• Bottom compartmentRemovable translucent dark smoky plastic compartment at the base with a glossy rim where it joins the body.
  1 region

  x 0.36 · y 0.78 · w 0.28 · h 0.12 (high)

Other

Studio product shot on a uniform light gray background with soft shadow on the lower right; bottle centered and vertically framed.

• Background and shadowPlain light gray backdrop with a soft contact shadow visible to the bottle's lower right.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Shot compositionFront-facing centered composition showing the full height of the bottle with even studio lighting and minimal reflection except on glossy lid and rim.

Colors

charcoal· body#2B2C2Cblack· lid#242524matte black· carry handle#11120Esmoky gray· bottom compartment#3A3C3D

02

Product

Disassembled insulated shaker bottle shown with main cylindrical bottle body, exposed threaded stainless interior with a 500 ml marking, separate wide-mouth lid assembly, a round plastic strainer disk, and a small screw-top container component. Bottle exterior has a vertical brand wordmark running along its side.

• Bottle body shapeTall cylindrical double-wall bottle body with straight sides and a slightly rolled lip at the top; interior shows stainless finish while exterior has a matte textured finish.
  1 region

  x 0.33 · y 0.03 · w 0.34 · h 0.66 (high)
• Interior marking“Embossed interior marking reading 500 ml located on the visible inner base wall of the bottle.”
  1 region

  x 0.52 · y 0.08 · w 0.12 · h 0.11 (medium)
• Exterior logo“Vertical wordmark printed on the bottle exterior reading STANLEY visible along the right side of the body, printed in a tone slightly lighter than the exterior finish.”
  1 region

  x 0.56 · y 0.22 · w 0.18 · h 0.56 (high)
• Main lid assemblyDetachable wide-mouth lid assembly made of dark translucent plastic with a hinged flip cap, circular drinking opening, and visible internal threads that match the bottle mouth.
  1 region

  x 0.70 · y 0.57 · w 0.28 · h 0.35 (high)
• Strainer diskFlat round plastic strainer disk with a square-grid pattern and a small raised rectangular pull tab at the center.
  1 region

  x 0.20 · y 0.70 · w 0.24 · h 0.17 (high)
• Small screw-top containerSeparate small screw-top jar component made of dark translucent plastic with a matching screw lid placed beside the jar; jar interior appears glossy.
  1 region

  x 0.02 · y 0.57 · w 0.28 · h 0.27 (high)

Other

Studio product shot on a light neutral background showing the bottle and disassembled components arranged on a flat surface with soft directional lighting from the upper left producing gentle shadows.

• Shot compositionTop-down angled studio photograph showing the main bottle near center, lid assembly to the right, small jar to the left, and strainer disk near the lower left; components are spaced and fully visible within frame.
• Lighting and shadowsSoft diffuse lighting with faint shadows cast beneath components, highlights visible on glossy plastic and the stainless interior.

Colors

matte charcoal· exterior body#33312Dbrushed stainless· interior wall#BDBAB4smoky black translucent· lid and small jar#22221D