Daystorm Horizon Gtx Boots Men

Men's all-weather leather and rubber boots with GORE-TEX waterproof protection and rugged Vibram traction.

GORE-TEX waterproof and breathable membrane; removable OrthoLite antimicrobial foam footbed; EVA midsole; Vibram rubber outsole; back pull loop.

Material

Genuine leather and rubber upper; fabric lining; EVA midsole; Vibram rubber outsole

Secondary

rubber, eva

Style

utilitarian, technical, waterproof, performance

Occasion

hiking, travel, everyday

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Shoes

01

Product

Side-profile of a black ankle-height winter boot showing leather upper, lace-up eyelets, molded lower toe and chunky lug sole with visible brand marks.

• Overall profileRight-side view of a single ankle-height boot resting on its sole, showing full lateral profile from heel to toe.
  1 region

  x 0.05 · y 0.48 · w 0.90 · h 0.42 (high)
• Upper materialSmooth black leather or leather-like upper with a slightly matte finish and visible seam stitching along the ankle and around the lower quarter.
  1 region

  x 0.12 · y 0.50 · w 0.60 · h 0.28 (high)
• Lacing and eyeletsCentral lace row with round black laces threaded through metal D-ring eyelets and hooks; laces tied loosely over the tongue.
  1 region

  x 0.55 · y 0.44 · w 0.20 · h 0.36 (high)
• Lower molded toe and splash weltRubberized lower toe and welt area with molded vertical toe ridges and textured band running around the lower perimeter of the upper.
  1 region

  x 0.57 · y 0.70 · w 0.33 · h 0.18 (high)
• Chunky lug soleThick multi-layered platform sole with deep lug tread; sole profile includes a raised midsole and aggressive outsole lugs.
  1 region

  x 0.08 · y 0.76 · w 0.84 · h 0.17 (high)
• Rear pull tabFabric pull tab loop at the back of the ankle collar, stitched into the heel seam.
  1 region

  x 0.09 · y 0.52 · w 0.06 · h 0.09 (high)
• Embossed brand mark on upper“Circular embossed mark on the lateral ankle area containing an icon above the word SOREL.”
  1 region

  x 0.18 · y 0.55 · w 0.14 · h 0.11 (medium)
• Gore-Tex tag“Small rectangular fabric tag near the lower lateral seam reading GORE-TEX.”
  1 region

  x 0.29 · y 0.67 · w 0.06 · h 0.03 (medium)
• Vibram logo on outsole“Yellow lowercase vibram logo printed on the lateral side of the sole near the heel.”
  1 region

  x 0.16 · y 0.81 · w 0.10 · h 0.06 (high)

Other

Studio product shot on a neutral light gray background with soft shadow under the sole; boot centered horizontally and cropped with generous top space.

• Background and stagingEven light gray backdrop with no visible props or packaging; product rests on an invisible surface producing a soft shadow.
• Lighting and shadowDiffuse studio lighting from above and front producing minimal specular highlights on the leather and a subtle shadow under the sole.
• Shot compositionBoot shown in full lateral profile, positioned low in the frame with empty space above; image crop includes full sole and toe.

Colors

black· upper#0E0E0Cdark charcoal· lower molded toe and midsole#11120Ebright yellow· outsole logo

02

Product

Rear three-quarter view of a pair of black ankle boots showing the rear heel, stacked lug sole, embossed brand marks, stitched upper panels, metal lace hardware, and a small woven side tag.

• Overall silhouettePair of ankle-height lace-up boots shown from rear three-quarter angle; shafts rise above the ankle with pull tabs at the center back and visible top collars.
• Upper material and finishSmooth matte black leather or leather-like upper with visible single and double-row topstitching along panel seams and around the heel counter.
  2 regions

  x 0.45 · y 0.16 · w 0.46 · h 0.57 (high); x 0.05 · y 0.20 · w 0.36 · h 0.56 (high)
• Heel pull tabVertical stitched pull tab centered on each heel counter extending above the top line of the shaft.
  2 regions

  x 0.61 · y 0.11 · w 0.07 · h 0.18 (high); x 0.14 · y 0.14 · w 0.06 · h 0.20 (high)
• Stitched welt and heel counterProminent stitched welt line encircles the boot where upper meets the textured heel counter and midsole; textured heel counter panel wraps rear-lateral heel.
  1 region

  x 0.40 · y 0.47 · w 0.52 · h 0.32 (high)
• Lace hardwareMetal D-ring and hook lace hardware visible on the outer side of the right boot near the shaft opening; laces tied with short ends.
  1 region

  x 0.72 · y 0.22 · w 0.12 · h 0.17 (high)
• Embossed logo on shaft“Circular embossed mark with a small pictorial element above and the word 'SOREL' beneath it on the outer side of the right boot shaft.”
  1 region

  x 0.64 · y 0.26 · w 0.12 · h 0.12 (high)
• Heel rubber patch text“Embossed block text 'SOREL' on the rubber heel patch of both boots.”
  2 regions

  x 0.66 · y 0.56 · w 0.22 · h 0.15 (high); x 0.07 · y 0.57 · w 0.24 · h 0.19 (high)
• Small woven side tagSmall rectangular woven side tag attached at the lateral seam above the midsole on the right boot; tag shows contrasting lighter text on a dark background.Partial
  1 region

  x 0.67 · y 0.53 · w 0.03 · h 0.03 (medium)
• Stacked lug soleThick stacked lug rubber sole with deep tread blocks, a stepped midsole profile, and a textured wraparound heel counter area.
  1 region

  x 0.30 · y 0.64 · w 0.65 · h 0.33 (high)
• Yellow sole logo“Small bright yellow sole logo recessed into the lateral midsole near the right boot outer edge.”
  1 region

  x 0.73 · y 0.78 · w 0.12 · h 0.10 (high)

Other

Studio shot with two boots on a light neutral background, soft even lighting and subtle shadows; image focuses on rear and outer sides of the boots with slight depth blur toward the left boot.

• Shot compositionTwo boots placed with the right boot slightly forward and the left boot set back and turned slightly outward; camera angle at low three-quarter rear level.
• Background and lightingUniform light grey studio background with soft diffuse lighting and minimal hard shadows beneath the soles.
• Depth and focusRight boot is the primary focus with sharper detail; left boot is slightly less sharp indicating shallow depth of field.
  2 regions

  x 0.05 · y 0.18 · w 0.38 · h 0.62 (medium); x 0.56 · y 0.10 · w 0.40 · h 0.74 (high)

Colors

matte black· upper leather#0E0E0Bdark charcoal· sole and heel counter#2C2C2Bvibrant yellow· Vibram sole logo

03

Product

Pair of black ankle boots shown from a three-quarter front angle; visible details include stitched leather uppers, textured rubber toe with vertical ridges, lace-up eyelets with round metal grommets, lugged rubber outsoles, and a small yellow rectangular brand/performance tag on the outer side of the right boot.

• Overall shapeAnkle-height boots with a rounded, slightly raised toe and a thick multi-layered midsole leading to a deep lug outsole; the image shows both boots with the right boot prominent in the foreground.
  1 region

  x 0.18 · y 0.08 · w 0.72 · h 0.86 (high)
• Upper material and constructionSmooth black leather or leather-like upper panels with visible double-row stitching where panels join around the toe cap and along the sidewall; ankle collar lined with a padded textile visible at the opening.
  1 region

  x 0.30 · y 0.08 · w 0.50 · h 0.60 (high)
• Toe and lower shellMatte black rubberized toe guard with vertical decorative ridges running from the vamp toward the toe tip and a textured rubber bumper wrapping the lower perimeter above the midsole.
  1 region

  x 0.28 · y 0.50 · w 0.56 · h 0.34 (high)
• Lacing systemCentral lace-up closure with round woven black laces threaded through metal round grommet eyelets and hooks near the ankle; laces have aglets and are tied in a bow on the right boot.
  1 region

  x 0.42 · y 0.12 · w 0.35 · h 0.65 (high)
• Outsole and treadThick black rubber lug outsole with deep rectangular and notched tread blocks visible on the front and side, and a pronounced heel block on the right boot.
  1 region

  x 0.18 · y 0.60 · w 0.65 · h 0.34 (high)
• Small side tagSmall vertical rectangular fabric tag on the outer side of the right boot with yellow lettering or motif on a darker background; text is not legible at this scale.Partial
  1 region

  x 0.85 · y 0.58 · w 0.07 · h 0.12 (medium)

Other

Studio product shot with neutral light gray background, even lighting and soft shadows; two boots positioned with the right boot in foreground and the left boot partially visible behind it.

• Shot compositionThree-quarter front close-up showing both boots at an angle, with the right boot centered in the foreground and the left boot cropped at the left edge.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Background and lightingUniform pale gray background with soft directional lighting producing mild shadow below and slightly to the lower left of the boots; no props or packaging present.
• Image qualityHigh-resolution, well-focused image with clear material texture and visible stitching detail; no motion blur.

Colors

matte black· upper leather#0E0E0Cblack rubber· rubber toe and bumper#0E0E0Cmetallic gray· metal eyelets#5D5C5Ayellow· small side tag / outsole badge