Triangular Flap Card Holder

Luxury leather card holder with a triangular snap flap, multiple card and bill slots, zip change pocket, and inner key ring, made in Japan by discord Yohji Yamamoto.

Triangular snap-button flap closure, multiple card and bill slots, zip change pocket, inner key ring with link chain, embossed signature logo, designer box included.

Material

Soft and luxurious cowhide leather

Style

minimal, classic, modern, contemporary

Occasion

everyday, work, travel, gift

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

01

Product

Front-facing black triangular-flap card holder made from smooth leather-like material, with visible card-slot seams, a diagonal flap closing to a round metal snap, and a short metal chain with key ring attached at the left edge.

• Overall shapeRectangular card holder with a triangular front flap that folds down from the top-right toward the lower-left, creating a distinct diagonal seam across the front face.
  1 region

  x 0.06 · y 0.64 · w 0.88 · h 0.26 (high)
• Material and finishSmooth, matte leather-like surface on the body and flap with very fine natural grain visible in close areas.
  1 region

  x 0.14 · y 0.66 · w 0.72 · h 0.18 (high)
• Diagonal flap seamVisible topstitched seam running along the diagonal edge of the triangular flap, following the fold line from upper-left toward lower-right of the flap tip.
  1 region

  x 0.20 · y 0.65 · w 0.62 · h 0.20 (high)
• Round metal snapSmall round metal snap located near the lower-right tip of the flap with a small engraved script mark on its face.
  1 region

  x 0.72 · y 0.72 · w 0.08 · h 0.10 (high)
• Engraved script on snapTiny cursive or script-style engraving visible on the snap face; characters are legible as a short scripted mark but not transcribed.
  1 region

  x 0.73 · y 0.73 · w 0.06 · h 0.06 (medium)
• Card-slot stitchingTwo vertical stitched seams on the front-left panel indicating separate card compartments or slot divisions.
  1 region

  x 0.30 · y 0.68 · w 0.14 · h 0.18 (high)
• Left-side chain attachmentShort metal chain attached to the upper-left corner of the holder, hanging down the left side and ending in a round metal key ring.
  1 region

  x 0.06 · y 0.65 · w 0.12 · h 0.28 (high)
• Key ringCircular metal key ring attached to the chain, visible outside the left edge of the holder.
  1 region

  x 0.04 · y 0.78 · w 0.12 · h 0.12 (high)
• Edge top rollTop edge of the holder shows a slightly rolled or padded seam that runs horizontally across the top, with visible topstitching.
  1 region

  x 0.12 · y 0.62 · w 0.76 · h 0.06 (high)

Other

Product centered against a uniform light gray background with soft, even lighting and a subtle shadow beneath the item. Image is front-facing and cropped to show the full width of the holder and the hanging key ring.

• BackgroundUniform light gray backdrop filling the entire frame.
• Shadow and lightingSoft diffuse lighting with a faint drop shadow directly under the product, indicating overhead/front illumination.
• Shot compositionCentered, straight-on frontal shot showing the front face of the card holder and the left-side chain element fully visible.

Colors

matte black· main body and flapgunmetal gray· metal hardware (chain, ring, snap)

02

Product

Black rectangular leather card holder shown front-facing with a horizontal external zip pocket near the top, visible edge stitching, an embossed script mark on the lower front, and a detachable metal chain clipped to a D-ring at the right edge.

• Overall shapeRectangular, horizontally oriented card holder with slightly rounded corners and visible top-fold edge.
  1 region

  x 0.08 · y 0.48 · w 0.84 · h 0.33 (high)
• Material and finishSmooth matte black leather surface with fine natural grain visible in close areas and a soft sheen on raised parts.
  1 region

  x 0.10 · y 0.50 · w 0.80 · h 0.26 (high)
• Top zip pocketHorizontal exterior zipper set into a stitched rectangular panel across the upper third of the front face, zipper teeth and tape visible.
  1 region

  x 0.17 · y 0.52 · w 0.66 · h 0.06 (high)
• Zipper pull hardwareRectangular metal zipper pull tag attached to the zipper slider, shiny silver finish, engraved or printed cursive mark present but not legible at this resolution.Partial
  1 region

  x 0.70 · y 0.51 · w 0.06 · h 0.09 (high)
• Embossed markLow-contrast embossed cursive script or logo centered on the lower half of the front; impression is visible but the characters are faint.
  1 region

  x 0.37 · y 0.62 · w 0.26 · h 0.10 (medium)
• Edge stitchingSingle-line topstitching runs around the perimeter and around the zipper panel, contrasting slightly in texture but matching color.
  1 region

  x 0.09 · y 0.49 · w 0.82 · h 0.31 (high)
• Right-side attachmentMetal D-ring riveted at the right edge of the holder where a chain is clipped; ring and clip are shiny silver metal.
  1 region

  x 0.86 · y 0.56 · w 0.08 · h 0.16 (high)
• Chain and claspsRemovable silver metal chain attached to the D-ring, composed of alternating link styles and ending in a lobster clasp; chain is laid out on the surface in front of the holder.
  1 region

  x 0.40 · y 0.75 · w 0.55 · h 0.18 (high)

Other

Product photographed on a plain light gray background with soft shadow beneath; front-facing studio shot centered in frame.

• Background and surfaceUniform light gray backdrop and flat surface with a soft diffuse shadow under the product.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Shot compositionCenter-aligned, straight-on view showing the front face of the card holder and the attached chain arranged across the foreground.
• LightingEven, soft studio lighting from above/front creating subtle highlights on metal hardware and minimal specular reflections on the leather.

Colors

matte black· main bodypolished silver· hardware (zipper, pull, D-ring, chain)

03

Product

Black triangular-flap card holder shown open, made of smooth leather-like material with three stitched card slots on the front panel, a triangular flap with snap closure, and a short metal chain with key ring attached at the left edge.

• Front card panelRectangular front panel with three vertical stitched card slots visible as two parallel stitched lines dividing the panel into three sections; panel surface is smooth with a slight sheen.
  1 region

  x 0.08 · y 0.54 · w 0.84 · h 0.34 (high)
• Triangular flapLarge triangular flap folded open and pointing to the top-right; interior surface visible and appears to be same smooth black material as exterior; perimeter topstitching visible along flap edge.
  1 region

  x 0.42 · y 0.08 · w 0.52 · h 0.44 (high)
• Snap closure hardwareTwo circular metal snap components visible: one socket on the front panel near the lower-center and one stud on the upper-right corner of the triangular flap; both are dark gunmetal in finish.
  2 regions

  x 0.55 · y 0.72 · w 0.11 · h 0.11 (high); x 0.80 · y 0.12 · w 0.12 · h 0.14 (high)
• Edge finish and stitchingVisible single-line topstitching around panel edges and flap; outer edges have a slightly glossy painted finish contrasting subtly with the matte-sheen face.
  1 region

  x 0.06 · y 0.50 · w 0.88 · h 0.44 (high)
• Chain and key ringShort metal chain attached to the left side of the holder ending in a round split key ring; metal matches the gunmetal finish of the snap hardware.
  1 region

  x 0.00 · y 0.58 · w 0.20 · h 0.28 (high)

Other

Product photographed on a neutral light-gray background with soft studio lighting producing mild highlights and soft shadows; image is a close-up detail shot focusing on the open card holder.

• Background and lightingUniform light-gray background with even, diffuse lighting; soft shadow below and to the right of the product indicates top-left light source.
• Shot compositionClose-up three-quarter view showing the holder open at an angle toward the top-right; product is cropped with the leftmost part of the key ring slightly inset from the image edge.

Colors

black· main bodygunmetal gray· metal hardware and chain