Alpin Parka

Canadian-designed Alpin parka with RDS-certified down insulation, a water-repellent windbreaker shell, and a relaxed cold-weather silhouette rated to -20 °C.

RDS-certified feather-and-down insulation; water-repellent windbreaker shell; tunnel hood; raglan sleeves; two-way zip closure under a snap flap; recessed rib knit cuffs; zipped front pockets.

Material

RDS (Responsible Down Standard)-certified feather-and-down insulation; water-repellent windbreaker shell

Secondary

feathers

Style

casual, classic, utilitarian, relaxed-fit

Occasion

everyday, travel

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Clothing > Outerwear > Coats & Jackets

01

Product

Right-side three-quarter view of a black hooded parka showing high collar, hood, two visible zip pockets with waterproof-style zippers, and a circular sleeve patch on the upper left sleeve.

• Silhouette and viewThree-quarter right-side view of a hip-length parka worn by a model; torso and right arm are visible, lower hem falls to just below the model's hip.
  1 region

  x 0.22 · y 0.08 · w 0.60 · h 0.86 (high)
• Hood and collarAttached hood with a structured, slightly voluminous shape and a high stand collar that folds up around the neck; inner collar shows a contrasting lighter fabric edge.
  1 region

  x 0.45 · y 0.03 · w 0.45 · h 0.28 (high)
• Chest pocketDiagonal chest pocket on the visible side with a black waterproof-style zipper and a short black zipper pull tab attached.
  1 region

  x 0.34 · y 0.30 · w 0.18 · h 0.20 (high)
• Lower pocket and zipperLower side pocket with a horizontal opening and a visible black zipper pull; pocket area is slightly padded and integrated into the side seam.
  1 region

  x 0.40 · y 0.66 · w 0.28 · h 0.24 (high)
• Sleeve patch“Circular sewn patch on the upper sleeve with a lighter circular emblem and the text KANUK below the emblem.”
  1 region

  x 0.58 · y 0.24 · w 0.12 · h 0.11 (high)
• Sleeve shape and paddingRight sleeve is slightly padded with visible horizontal shaping at the elbow and a smooth outer shell fabric; cuff area is not visible.
  1 region

  x 0.54 · y 0.41 · w 0.28 · h 0.30 (high)
• Outer fabric appearanceSmooth matte black outer shell with minimal visible texture and low sheen under soft studio lighting.

Other

Studio product shot with a male model against a plain pale background. Soft, even lighting with minimal shadows. Blue denim jeans visible on the model; image cropped at mid-thigh on the right side.

• Model and poseMale model turned slightly away from camera, looking off to the left with left hand in pocket; upper body is angled showing the jacket's side profile.
  1 region

  x 0.05 · y 0.00 · w 0.90 · h 0.60 (high)
• Background and lightingPlain pale neutral background with even soft studio lighting that produces minimal shadows and a subtle highlight on the jacket surface.
• Visible clothing besides productMedium blue denim jeans visible from the waist to mid-thigh on the lower right side of the image.
  1 region

  x 0.36 · y 0.72 · w 0.48 · h 0.26 (high)

Colors

matte black· outer shell#0E0D13medium gray· sleeve patch emblem

02

Product

Front view of a mid-length black parka worn by a model; visible features include an attached hood with high collar, a front storm placket with snap closures, vertical zippered chest pockets, and slightly padded matte outer shell.

• Overall silhouetteMid-length parka with a straight cut falling to the upper thigh; relaxed fit over layered clothing visible on a standing model facing forward.
  1 region

  x 0.23 · y 0.08 · w 0.54 · h 0.58 (high)
• Outer shell material and finishSmooth, matte fabric with light horizontal quilting lines suggesting thin padding; fabric appears windproof and slightly structured.
  1 region

  x 0.28 · y 0.12 · w 0.46 · h 0.40 (high)
• Hood and collarAttached hood integrated into a high stand collar; collar stands up around the neck and hood opening frames the model's face.
  1 region

  x 0.32 · y 0.04 · w 0.36 · h 0.18 (high)
• Front closureCentral front zipper with an overlapping storm placket that closes with visible round snap buttons along its edge.
  1 region

  x 0.38 · y 0.18 · w 0.24 · h 0.36 (high)
• Chest pocketsVertical zippered chest pockets set into the front panels, zipper tracks visible on both sides of the chest.
  2 regions

  x 0.34 · y 0.22 · w 0.13 · h 0.16 (high); x 0.53 · y 0.22 · w 0.12 · h 0.16 (high)
• Sleeve cuffPlain straight sleeve cuff with slight gather at the wrist; no visible external elastic or ribbing detail.
  1 region

  x 0.58 · y 0.38 · w 0.20 · h 0.16 (high)
• Visible inner liningDarker inner lining or inner layer visible along the open front and inside of the collar, appearing slightly different in tone from the outer shell.
  1 region

  x 0.40 · y 0.12 · w 0.20 · h 0.18 (medium)

Other

Studio full-body product shot of a model wearing the parka against a plain light background with soft diffuse lighting and a neutral floor; slight shadow visible beneath shoes.

• Shot compositionFull-body shot with the model centered; camera angle is straight-on at standing height.
• Background and floorPlain light grey to off-white background with a smooth light grey floor surface meeting the backdrop near the lower third of the image.
  2 regions

  x 0.00 · y 0.00 · w 1.00 · h 0.92 (high); x 0.00 · y 0.92 · w 1.00 · h 0.08 (high)
• Lighting and shadowsSoft, diffuse lighting with minimal harsh shadows; faint shadow cast on the floor beneath the model's feet.
  1 region

  x 0.40 · y 0.92 · w 0.20 · h 0.06 (high)
• Model and styling not productModel is wearing additional garments and shoes that are not part of the photographed product.

Colors

black· outer shell#0E0D13very dark charcoal· inner collar/lining#1A1A1D

03

Product

Rear three-quarter view of a black hooded parka worn by a model; visible features include a plain back, attached hood, long sleeves, and a small branded patch on the upper left sleeve.

• Overall silhouetteThree-quarter rear view of a mid-length parka with a straight hem that falls to the model's upper hips; the garment has a relaxed, slightly boxy fit over the torso.
  1 region

  x 0.18 · y 0.16 · w 0.64 · h 0.72 (high)
• Hood constructionAttached hood with a smooth outer shell and a moderate volume that sits up off the back of the neck; visible seam lines run along the hood surface.
  1 region

  x 0.32 · y 0.02 · w 0.42 · h 0.22 (high)
• Sleeve and cuffLong sleeves with a straight hem at the wrist; sleeves appear smooth and unpadded on the visible exterior surface.
  1 region

  x 0.14 · y 0.30 · w 0.30 · h 0.55 (high)
• Back panelPlain back panel without visible seams, vents, or external pockets on the visible rear surface.
  1 region

  x 0.34 · y 0.18 · w 0.46 · h 0.50 (high)
• Logo patch on sleeveSmall circular or shield-shaped branded patch sewn to the upper left sleeve; patch has a lighter design on a darker background.
  1 region

  x 0.16 · y 0.33 · w 0.08 · h 0.10 (high)
• Outer material appearanceSmooth, matte fabric with minimal visible texture and subtle creasing at natural fold points.
• Partial collar detailRaised collar section visible at the neck opening, forming a short stand when viewed from the rear quarter angle.
  1 region

  x 0.28 · y 0.12 · w 0.22 · h 0.10 (medium)

Other

Studio shot of a model wearing the parka against a plain light background; three-quarter rear framing with soft, even lighting and minimal shadows.

• Model and poseMale model shown from the rear three-quarter angle, head turned slightly to the left; left arm hangs down and right arm is mostly out of frame.
  1 region

  x 0.12 · y 0.00 · w 0.76 · h 0.82 (high)
• Background and lightingNeutral off-white studio background with even diffuse lighting that produces soft shadows and minimal specular highlights on the garment.
• Visible non-product clothingBlue denim jeans visible from the waist down; jeans are not part of the product but are present in the frame.
  1 region

  x 0.28 · y 0.72 · w 0.44 · h 0.26 (high)
• Image crop and qualityFull-resolution studio photograph with the product centered and no noticeable blur or compression artifacts.

Colors

black· outer shell#0E0D12dark gray with light gray emblem· sleeve patch