Croc-Band Rectangular Watch

Rectangular watch with leather strap and Japanese movement.

Water-resistant stainless-steel case, leather strap, Japanese quartz movement.

Material

Leather strap, stainless-steel case

Secondary

stainless-steel

Gender

male

Age Group

adult

Condition

new

Category

Apparel & Accessories > Jewelry > Watches

01

Product

Rectangular wristwatch with a gold-tone metal case, champagne-colored dial with Roman numerals and black dauphine hands, and a black croc-pattern leather strap with visible topstitching. A ridged crown is visible at the case right.

• Case shape and finishRectangular metal watch case with rounded internal corners and a polished gold-tone finish visible on the bezel and case sides.
  1 region

  x 0.28 · y 0.28 · w 0.44 · h 0.36 (high)
• Dial layoutChampagne-colored rectangular dial with an inner recessed rectangular panel, minute track along the edge, and large black Roman numeral hour markers at the corners and sides.
  1 region

  x 0.30 · y 0.24 · w 0.39 · h 0.44 (high)
• HandsThree black metal hands: an hour and minute pair with tapered dauphine-style shapes and a thin straight seconds hand terminating near the dial center.
  1 region

  x 0.33 · y 0.33 · w 0.33 · h 0.28 (high)
• CrownSmall gold-tone ridged crown projecting from the right mid-case, with a rounded tip.
  1 region

  x 0.67 · y 0.41 · w 0.06 · h 0.08 (high)
• Strap material and patternBlack leather strap with an embossed croc pattern and parallel stitched seams running along each edge; strap shows a glossy finish.
  2 regions

  x 0.33 · y 0.02 · w 0.34 · h 0.24 (high); x 0.33 · y 0.62 · w 0.34 · h 0.36 (high)
• Dial text“STACCATO”
  1 region

  x 0.40 · y 0.30 · w 0.21 · h 0.06 (high)
• Minute trackNarrow printed minute track with small rectangular markers running around the inner edge of the dial near the bezel.
  1 region

  x 0.30 · y 0.24 · w 0.39 · h 0.44 (high)

Other

Studio-style front view of the watch centered on a light neutral background with soft shadow beneath; image is vertically oriented and the product is well lit with slight reflections on the case and strap.

• Shot compositionCentered vertical crop showing the watch from the front, with the full strap visible top and bottom and the case orientated upright.
• BackgroundUniform light gray background extending across the frame.
• Shadow and reflectionSoft drop shadow beneath the lower strap and subtle specular reflections on the polished case and glossy strap.
• Image qualitySharp focus on the watch face and strap; no visible compression artifacts or major blur.

Colors

polished gold· case#AD9975champagne· dial#D2C6ACblack· strap#121216

02

Product

Rear view of a rectangular watch showing the strap, buckle, and case back. Black croc-embossed leather exterior, tan inner lining stamped 'GENUINE LEATHER', brushed stainless steel case back, and gold-tone metal frame and buckle are visible.

• Rectangular case backBrushed stainless steel rectangular case back with concentric circular fine-print engraving; only the metal surface and engraved ring are visible, text on the ring is not legible at this resolution.Partial
  1 region

  x 0.06 · y 0.32 · w 0.34 · h 0.33 (high)
• Gold-tone case framePolished gold-tone metal rectangular frame surrounds the case back on the visible edge, with a reflective finish and chamfered corner visible near the strap attachment.
  1 region

  x 0.28 · y 0.27 · w 0.17 · h 0.21 (high)
• Croc-embossed strap exteriorBlack croc-embossed leather strap exterior with visible gloss and stitched perimeter detail; strap shows several adjustment holes and a tapered end with a stitched pointed tip.
  1 region

  x 0.04 · y 0.58 · w 0.74 · h 0.36 (high)
• Tan inner liningSmooth tan/beige inner lining of the strap visible where the strap curves toward the case; inner surface has a debossed stamp reading 'GENUINE LEATHER'.
  1 region

  x 0.59 · y 0.30 · w 0.36 · h 0.38 (high)
• Inner lining text“GENUINE LEATHER”
  1 region

  x 0.65 · y 0.39 · w 0.23 · h 0.20 (high)
• Gold-tone tang bucklePolished gold-tone metal tang buckle with a single prong and a rectangular frame; buckle surface is reflective and shows a small hole for the spring bar at the tongue hinge.
  1 region

  x 0.62 · y 0.62 · w 0.28 · h 0.23 (high)
• Strap keepersTwo black leather strap keepers (one fixed and one movable) sit over the strap exterior near the buckle; both are croc-embossed and match the strap exterior finish.
  1 region

  x 0.15 · y 0.62 · w 0.21 · h 0.21 (high)
• Stitching detailContrast stitching visible along the inner edge of the strap where the tan lining meets the black exterior; stitches are evenly spaced and light-colored.
  1 region

  x 0.56 · y 0.30 · w 0.37 · h 0.27 (high)
• Case back engraving illegibleFine-print circular engraving on the stainless steel case back is present but characters are too small or blurred to transcribe.Partial
  1 region

  x 0.06 · y 0.32 · w 0.34 · h 0.33 (high)

Other

Studio product shot on a light neutral background with soft shadows. Image frames the rear strap and buckle of the watch with even lighting and minimal reflections.

• Shot compositionClose-up rear-angle studio shot focused on the strap and buckle; top of the watch case is cropped at the left edge.
• Background and lightingEven, diffuse lighting on a light gray background producing soft shadow under the strap and minimal harsh highlights.
• Image qualityHigh-resolution image where most textures and stitched details are sharp; very small engraved text on the case back is not legible.

Colors

gloss black· strap exterior#0C0E13tan beige· inner lining#C4A591brushed silver· case back#C5BCB2polished gold· case frame and buckle#B2A69B