Northon Regenerated Leather Card Holder

Compact card holder made from textured regenerated leather with RFID protection and multiple slots.

RFID protection, multiple card and bill slots, signature storage case included

Material

Regenerated Leather

Style

minimal, modern

Occasion

everyday, travel

Gender

unisex

Age Group

adult

Condition

new

Category

Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

01

Product

Front-facing flat rectangular card holder in black with three horizontal card slots across the upper portion, visible edge stitching, textured surface, and a small silver 'BOSS' logo centered near the lower edge.

• Overall shapeFlat rectangular card holder shown face-on with short vertical sides and a straight top edge.
  1 region

  x 0.11 · y 0.28 · w 0.78 · h 0.45 (high)
• Card slot rowsThree horizontal card-slot openings across the upper third of the front, each defined by a stitched seam and a thin exposed pocket edge.
  1 region

  x 0.13 · y 0.30 · w 0.74 · h 0.18 (high)
• Surface textureFine crosshatched textured finish across the visible front surface.
  1 region

  x 0.12 · y 0.34 · w 0.76 · h 0.36 (high)
• Edge stitchingSingle-line topstitching visible along left, right and top edges and along the slot seams.
  1 region

  x 0.12 · y 0.30 · w 0.76 · h 0.38 (high)
• Logo text“BOSS”
  1 region

  x 0.43 · y 0.65 · w 0.14 · h 0.06 (high)
• Logo materialSmall raised metallic-silver letters centered near the lower front edge reading 'BOSS'.
  1 region

  x 0.43 · y 0.64 · w 0.14 · h 0.07 (high)

Other

Product centered on a uniform light gray background with soft shadow beneath; even frontal lighting and minimal reflections; image is tightly cropped leaving padding above the product.

• Background and stagingEven light gray seamless background with a faint soft shadow directly under the card holder.
• Shot compositionCard holder centered horizontally and positioned in the lower half of the frame with generous empty space above.
• Image qualitySharp focus on product with even lighting and minimal glare; no visible props or hands.

Colors

matte black· front body#0D0E0Dmetallic silver· logo letters

02

Product

Slim rectangular black textured card holder seen flat-on with multiple horizontal card slots on the visible face, stitched edges, and a narrow top opening.

• Overall shapeFlat rectangular card holder shown face-on with the long edge horizontal and a narrow thickness not visible from this angle.
  1 region

  x 0.12 · y 0.58 · w 0.76 · h 0.30 (high)
• Surface textureFine crosshatch or pebble-like textured finish covering the entire visible surface of the holder.
  1 region

  x 0.14 · y 0.62 · w 0.72 · h 0.24 (high)
• StitchingSingle-line topstitching runs along the outer perimeter edges, visible as a narrow stitched border on the left, right, and top edges.
  1 region

  x 0.12 · y 0.58 · w 0.76 · h 0.30 (high)
• Card slot rowsThree horizontal card slot openings formed by stitched seams near the top third of the face; the topmost edge forms a narrow opening across the full width.
  1 region

  x 0.14 · y 0.58 · w 0.72 · h 0.10 (high)
• Bottom panelLarger smooth textured lower panel below the card slots without visible openings or text.
  1 region

  x 0.14 · y 0.68 · w 0.72 · h 0.18 (high)
• No visible printed textThere is no legible printed text, logos, or markings on the visible face.

Other

Product centered on a plain light gray studio background with even diffuse lighting and soft shadow at the product base.

• BackgroundUniform light gray studio background filling the image outside the product area.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.98 (high)
• Shot compositionFlat frontal shot with the card holder centered horizontally and positioned in the lower half of the frame.
• Lighting and shadowEven diffuse studio lighting with a faint soft shadow visible directly beneath the product.
  1 region

  x 0.16 · y 0.84 · w 0.68 · h 0.06 (medium)

Colors

matte black· body#0D0E0C