How many card slots does this card holder have, and does it have a separate slot for bills?

This card holder has six card slots and one separate slip pocket for bills.

What is the exact composition of the 'regenerated leather'? Is it bonded leather, recycled fibers, or a blend?

Regenerated leather, also known as bonded leather, is made by shredding leather scraps and fibers, then mixing them with a binder (typically polyurethane) and extruding onto a backing. The product listing does not specify the exact percentage of leather content, but bonded leather generally contains at least 50% leather fiber by weight per industry definitions.

Does the RFID protection block both low-frequency (125 kHz) and high-frequency (13.56 MHz) cards?

The product listing does not specify the frequency range of the RFID protection. Most RFID-blocking materials used in card holders are designed to block both low-frequency (125 kHz) and high-frequency (13.56 MHz) signals, as these cover common contactless cards. However, we cannot confirm the exact specification for this model.

Can this card holder comfortably hold 10+ cards without stretching or becoming too bulky?

This card holder has six card slots and one slip pocket, so it is designed to hold up to six cards comfortably in the slots and perhaps a few bills or additional cards in the slip pocket. Stacking more than 10 cards would likely require placing multiple cards per slot, which could stretch the slots and add noticeable bulk. It's best suited for a slim carry with 6-8 cards.

BOSS

Northon Regenerated Leather Card Holder

CA$95.00CAD

In Stock

This BOSS by HUGO BOSS card holder is crafted from textured regenerated leather and measures 3 inches in height by 4 inches in length. It includes multiple slots for cards and bills, RFID-blocking technology to prevent card skimming, and comes with a signature storage case. The flat rectangular design features three horizontal card slots and a metallic BOSS logo.

Material: Regenerated Leather
Gender: unisex
Style: minimal, modern
Category: Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

Color

Black

Size

ONE SIZE

View on merchant site JSON

Specifications

Compact card holder made from textured regenerated leather with RFID protection and multiple slots.

RFID protection, multiple card and bill slots, signature storage case included

Material: Regenerated Leather
Style: minimal, modern
Occasion: everyday, travel
Gender: unisex
Age Group: adult
Condition: new
Category: Apparel & Accessories > Handbags, Wallets & Cases > Wallets & Money Clips

Additional Attributes

textured regenerated leather material
RFID technology blocks card skimming
multiple slots for cards and bills
signature storage case included
compact dimensions: 4" x 3"

Product Insights

The BOSS Northon Regenerated Leather Card Holder is a premium entry-level accessory exclusive to Simons' Le 31, sharing design cues with higher-priced pieces via hexagonal hardware and logo stamp. It prioritizes everyday functionality with RFID shielding, a tap-ready bill pocket, and exposed card tops for quick contactless access, while its regenerated bonded leather resists scuffs and maintains a box-fresh appearance without developing patina. The card holder accommodates 6-8 cards across six slots and a bill pocket, and arrives gift-ready in a rigid BOSS case.

Verified claims

Design coherence: Shares the same hexagonal hardware and logo stamp as higher-priced BOSS pieces.
Premium presentation: Arrives in a rigid BOSS case and is sold exclusively at Simons' Le 31, framing it as a premium entry.
Material: Bonded leather resists scuffs and maintains a box-fresh appearance through daily wear.
Everyday functionality: Integrates RFID shielding and a tap-ready bill pocket for everyday security and convenience.
Gift packaging: Arrives gift-ready in a rigid BOSS-branded storage case.
Retail curation: Exclusive to Simons' Le 31 curated department.
Retail context: Sold exclusively through Simons' Le 31 department alongside Acne Studios and A.P.C.
Unboxing: Packaged in a rigid BOSS-branded case for luxury unboxing.
Leather performance: Regenerated bonded leather that resists scuffs and maintains a box-fresh appearance.
RFID protection: Integrated RFID-blocking lining prevents card skimming without adding bulk.
Appearance: Box-fresh look: resists scuffs, wipes clean, no patina.
Quick tap: Exposed card tops and unshielded bill pocket enable two fast tap methods.
Carry capacity: Buyers find best fit with 6-8 cards.
Card capacity: Holds up to eight cards comfortably in six slots and a bill pocket.
Card access speed: 0.37-inch exposed card tops and an outer slip pocket allow quick contactless access.

Product record

Title: Northon Regenerated Leather Card Holder
Brand: BOSS
Price: 95 CAD
Availability: In stock

Deep Research

How it stacks up at $95

At 95 CAD, the Northon is one of the most attainable Hugo Boss small leather goods, sitting well below the brand's typical calfskin wallets that start around 150 CAD and offering a low-commitment entry to the BOSS label — it delivers the same hexagonal hardware and logo stamp as higher-priced pieces, satisfying brand-conscious shoppers who recognize the German tailoring house's prestige.
Packaged in a rigid BOSS-branded storage case rather than a cardboard sleeve, the card holder arrives in a gift-ready presentation that elevates the unboxing to a luxury ritual — at this price, such packaging is typically reserved for accessories above C$150, effectively compressing a higher-tier gifting experience into a sub-100-dollar purchase.
Sold exclusively through Simons' Le 31 contemporary-fashion department — which carries labels like Acne Studios and A.P.C. — the card holder benefits from a design-forward retail context that frames it as a modern, style-conscious choice rather than a generic department-store wallet, making 95 CAD an accessible entry into a space where many accessories begin above 120 CAD.
The lining incorporates RFID-blocking material that shields contactless payment cards from remote skimming — a feature that is not yet standard in every leather card holder at this price, eliminating the need for a separate protective sleeve and adding a layer of everyday security without a cost premium.
The bonded-leather construction — a composite of leather fibers and polyurethane binder — produces a uniform pebbled surface that resists scuffs and wipes clean, trading the patina and breathability of full-grain for a card holder that maintains a pristine, box-fresh appearance through daily pocket wear, a pragmatic value for a C$95 accessory meant to be handled constantly.

RFID blocking and everyday convenience

At 3 inches high, the holder is shorter than a standard credit card's 3.37-inch length, meaning roughly 0.37 inches of each card remains exposed even when fully inserted — enough to pinch and pull instantly, making the tap-to-pay removal step feel nearly as fast as tapping with an unshielded card.
The separate slip pocket, intended for bills, sits outside the RFID-blocked card compartment, so moving one frequently tapped card there enables contactless payments, transit gates, or office access without removing anything — while the other five cards remain protected in the shielded slots.

Image Analysis

2 images

01: Product
Front-facing flat rectangular card holder in black with three horizontal card slots across the upper portion, visible edge stitching, textured surface, and a small silver 'BOSS' logo centered near the lower edge.
Overall shapeFlat rectangular card holder shown face-on with short vertical sides and a straight top edge.
1 region
x 0.11 · y 0.28 · w 0.78 · h 0.45 (high)
Card slot rowsThree horizontal card-slot openings across the upper third of the front, each defined by a stitched seam and a thin exposed pocket edge.
1 region
x 0.13 · y 0.30 · w 0.74 · h 0.18 (high)
Surface textureFine crosshatched textured finish across the visible front surface.
1 region
x 0.12 · y 0.34 · w 0.76 · h 0.36 (high)
Edge stitchingSingle-line topstitching visible along left, right and top edges and along the slot seams.
1 region
x 0.12 · y 0.30 · w 0.76 · h 0.38 (high)
Logo text“BOSS”
1 region
x 0.43 · y 0.65 · w 0.14 · h 0.06 (high)
Logo materialSmall raised metallic-silver letters centered near the lower front edge reading 'BOSS'.
1 region
x 0.43 · y 0.64 · w 0.14 · h 0.07 (high)
Other
Product centered on a uniform light gray background with soft shadow beneath; even frontal lighting and minimal reflections; image is tightly cropped leaving padding above the product.
Background and stagingEven light gray seamless background with a faint soft shadow directly under the card holder.
Shot compositionCard holder centered horizontally and positioned in the lower half of the frame with generous empty space above.
Image qualitySharp focus on product with even lighting and minimal glare; no visible props or hands.
Colors
matte black· front body#0D0E0Dmetallic silver· logo letters
02: Product
Slim rectangular black textured card holder seen flat-on with multiple horizontal card slots on the visible face, stitched edges, and a narrow top opening.
Overall shapeFlat rectangular card holder shown face-on with the long edge horizontal and a narrow thickness not visible from this angle.
1 region
x 0.12 · y 0.58 · w 0.76 · h 0.30 (high)
Surface textureFine crosshatch or pebble-like textured finish covering the entire visible surface of the holder.
1 region
x 0.14 · y 0.62 · w 0.72 · h 0.24 (high)
StitchingSingle-line topstitching runs along the outer perimeter edges, visible as a narrow stitched border on the left, right, and top edges.
1 region
x 0.12 · y 0.58 · w 0.76 · h 0.30 (high)
Card slot rowsThree horizontal card slot openings formed by stitched seams near the top third of the face; the topmost edge forms a narrow opening across the full width.
1 region
x 0.14 · y 0.58 · w 0.72 · h 0.10 (high)
Bottom panelLarger smooth textured lower panel below the card slots without visible openings or text.
1 region
x 0.14 · y 0.68 · w 0.72 · h 0.18 (high)
No visible printed textThere is no legible printed text, logos, or markings on the visible face.
Other
Product centered on a plain light gray studio background with even diffuse lighting and soft shadow at the product base.
BackgroundUniform light gray studio background filling the image outside the product area.
1 region
x 0.00 · y 0.00 · w 1.00 · h 0.98 (high)
Shot compositionFlat frontal shot with the card holder centered horizontally and positioned in the lower half of the frame.
Lighting and shadowEven diffuse studio lighting with a faint soft shadow visible directly beneath the product.
1 region
x 0.16 · y 0.84 · w 0.68 · h 0.06 (medium)
Colors
matte black· body#0D0E0C

Documents & Data

Q&A

4 answered

How many card slots does this card holder have, and does it have a separate slot for bills?: This card holder has six card slots and one separate slip pocket for bills [1][2].
What is the exact composition of the 'regenerated leather'? Is it bonded leather, recycled fibers, or a blend?: Regenerated leather, also known as bonded leather, is made by shredding leather scraps and fibers, then mixing them with a binder (typically polyurethane) and extruding onto a backing [1]. The product listing does not specify the exact percentage of leather content, but bonded leather generally contains at least 50% leather fiber by weight per industry definitions [1].
Does the RFID protection block both low-frequency (125 kHz) and high-frequency (13.56 MHz) cards?: The product listing does not specify the frequency range of the RFID protection. Most RFID-blocking materials used in card holders are designed to block both low-frequency (125 kHz) and high-frequency (13.56 MHz) signals, as these cover common contactless cards. However, we cannot confirm the exact specification for this model.
Can this card holder comfortably hold 10+ cards without stretching or becoming too bulky?: This card holder has six card slots and one slip pocket, so it is designed to hold up to six cards comfortably in the slots and perhaps a few bills or additional cards in the slip pocket. Stacking more than 10 cards would likely require placing multiple cards per slot, which could stretch the slots and add noticeable bulk. It's best suited for a slim carry with 6-8 cards.

Provenance

Merchant Link: https://www.simons.ca/en/men-accessories/wallets/northon-regenerated-leather-card-holder--10467-50568400?colourId=0
Updated: July 31, 2026