Clocks and Colors
Etched Tiger And Dragon Ring
CA$109.00CAD
In Stock
The Etched Tiger and Dragon Ring is a wide stainless steel band ring with high-relief tiger and dragon motifs around the exterior, darkened recessed areas for contrast, and a polished inner band engraved with a swirl pattern. It measures 8 mm (0.25") in width and is intended as a wearable jewelry accessory. The ring has an antiqued silver-tone exterior finish and is sold in a small signature box.
- Material
- Stainless steel
- Category
- Apparel & Accessories > Jewelry > Rings
Color
Specifications
Stainless steel ring featuring an etched tiger and dragon design, 8 mm wide and presented in a small signature box.
Etched tiger and dragon motif; 8 mm width; stainless steel construction; sold in a small signature box.
- Material
- Stainless steel
- Gender
- male
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Rings
Additional Attributes
- Etched tiger and dragon motif
- Stainless steel construction
- 8 mm (0.25 inch) width
- Sold in a small signature box
- Clocks and Colors at Le 31 collection
Product Insights
Made from stainless steel with kambaba jasper. The 8 mm width changes how the ring fits compared with a thin band. The silver tone is the steel itself, with no plating layer to flake or wear through. Wipe with a soft cloth as needed; for etched grooves use lukewarm water with a drop of mild soap and a soft-bristle brush, then dry completely. Wide coverage can trap soap, water and sweat under the band, so slide it off when washing hands and dry properly. A wide, heavy-looking silver-tone ring with high-relief tiger and dragon motifs, styled for a bold masculine look.
Verified claims
- sizing
- Offered only in whole sizes 8 through 11, with no half sizes.
- value
- All four sizes carry the same 109 CAD price with no sale price, so upsizing costs nothing.
- fit
- The 8 mm width changes how the ring fits compared with a thin band.
- fit_check
- A well-fitted ring should need a gentle twist to pass the knuckle and then sit flat without digging in.
- sizing_method
- Measure your finger normally, then test an 8 mm-wide paper strip at your baseline size over the knuckle.
- comfort
- Some first-week unfamiliarity is normal, but persistent indentation or difficulty removing without soap signals a genuine size problem.
- stacking
- If you plan to stack this ring with others, size for the total combined width.
- material
- Made from stainless steel with kambaba jasper.
- material_behavior
- The silver tone is the steel itself, with no plating layer to flake or wear through.
- durability
- Stainless steel resists rust, tarnish and corrosion for everyday wear, though the surface can still scratch with hard use.
- care
- Wipe with a soft cloth as needed; for etched grooves use lukewarm water with a drop of mild soap and a soft-bristle brush, then dry completely.
- care_wide_band
- Wide coverage can trap soap, water and sweat under the band, so slide it off when washing hands and dry properly.
- construction
- The exterior has raised, high-relief sculpting with densely packed tiger and dragon motifs and darkened recesses for contrast.
- design_detail
- The inner band carries a continuous decorative swirl or cloud pattern etched or cast into the metal.
- finish
- Polished silver raised surfaces contrast with dark oxidized recesses, and the top rim is smoother and more reflective than the textured outer face.
- style
- A wide, heavy-looking silver-tone ring with high-relief tiger and dragon motifs, styled for a bold masculine look.
- use_cases
- Built for everyday wear in any environment, according to brand material guidance.
- packaging
- Sold in a small signature box.
- comparison
- Unlike silver-plated base metal, this solid stainless steel ring has no plating layer to flake, though it can scratch.
- etching
- Hardened stainless steel is typically laser-engraved because mechanical tools do not respond well to its surface; laser results are sharp and permanent, but deep engraving can compromise the darkness of oxidized marks.
- color
- Offered only in Silver.
Product record
- Title
- Etched Tiger And Dragon Ring
- Brand
- Clocks and Colors
- Price
- 109 CAD
- Availability
- In stock
Buying Guide
1 comparison · 9 sourcesProduct comparison
Compared within this brand.
| Etched Tiger And Dragon Ring: Choose this if you want a bold, wide statement ring in stainless steel and kambaba jasper, with dense high-relief dragon and tiger motifs whose recessed grooves are darkened for strong contrast against the polished silver-tone finish. The band measures 8 mm wide with a substantial, heavy look, a smooth reflective interior engraved with a decorative swirl pattern, and comes in sizes 8 through 11 in silver, packaged in a small signature box. Note that the appearance described here is based on image analysis, with the dragon-and-tiger reading of the sculpting being an interpretive one.[1,2,3] | Homecoming Silver Ring: Choose this if you want a handcrafted sterling silver signet ring with carved bird and nautical detailing, including a raised scalloped bezel and darkened oxidized recesses that highlight the sculpted swallow figure and band motifs. It suits wearers who like a chunky carved look — the band tapers from a wide 17 mm centre — and it comes offered in sizes 7 through 11 in a designer box. The brand describes its silver pieces as hand-carved in Bali by master silversmiths, and its product page reports a 5.0 out of 5 rating based on 62 reviews.[4,5,6,7] | Horizon Silver Ring: Choose this if you want a wide sterling silver band with natural turquoise — it features three raised turquoise cabochons in a horizontal row (a larger central oval flanked by two smaller stones) and engraved, stamped metalwork including a rope-style border along the edges. The 9 mm band comes in sizes 8 through 11, was designed in collaboration with Peter McKinnon, and arrives in a designer box. Note that the finer details of the stone arrangement and band patterns come from analysis of the product photos rather than the listed specifications.[8,9] |
Image Analysis
3 images- 01
Product
A wide, heavy-looking silver-tone ring shown flat on a surface with raised, sculpted relief motifs around the exterior and a polished inner band with decorative engraved swirls.
- Overall shapeWide circular band with substantial thickness and a flat base where it rests on the surface; ring is photographed face-up showing the exterior relief and part of the inner surface.
1 region
x 0.20 · y 0.44 · w 0.60 · h 0.20 (high) - Exterior reliefRaised, high-relief sculpting wraps around the exterior band depicting densely packed organic shapes and animal features consistent with dragon and tiger elements; recessed areas are darkened for contrast.
1 region
x 0.20 · y 0.46 · w 0.60 · h 0.16 (high) - Interior finishPolished inner surface with a smooth reflective finish and engraved swirling decorative pattern visible on the inner wall.
1 region
x 0.36 · y 0.44 · w 0.28 · h 0.12 (high) - Surface textureExterior surface is uneven and highly textured with many raised ridges and recessed dark lines; interior rim is smooth and reflective.
1 region
x 0.20 · y 0.44 · w 0.60 · h 0.20 (high)
Other
Studio shot on a plain light background with soft directional lighting from upper left producing a soft shadow to the right of the ring.
- Shot compositionProduct centered in lower half of image with ample negative space above; camera angle is slightly above and level with the ring showing both exterior detail and inner surface.
- Lighting and shadowSoft, diffuse lighting from upper left creating mild highlights on the polished inner rim and a soft shadow cast to the right of the ring.
1 region
x 0.56 · y 0.50 · w 0.28 · h 0.16 (medium) - BackgroundUniform off-white to very light gray background with slight gradient; no props or packaging visible.
Colors
antique silver· band exteriorpolished silver· inner polished rimdark patina gray· recessed patina- Overall shapeWide circular band with substantial thickness and a flat base where it rests on the surface; ring is photographed face-up showing the exterior relief and part of the inner surface.
- 02
Product
Front-facing closeup of a wide metal ring showing raised, highly textured etched motifs in high-relief on the outer band and a decorative swirl pattern on the inner band.
- Band geometryWide circular metal band with flat outer faces and a rounded inner edge visible at the top rim.
1 region
x 0.06 · y 0.42 · w 0.88 · h 0.34 (high) - Outer relief motifsDense raised sculptural motifs in high relief covering the outer circumference; shapes include sinuous scaled forms and flowing lines interpreted visually as dragon and tiger style textures.
1 region
x 0.10 · y 0.45 · w 0.80 · h 0.30 (high) - Surface finishPolished metallic highlights on raised surfaces with darker recessed patina in grooves creating strong contrast.
1 region
x 0.12 · y 0.46 · w 0.76 · h 0.28 (high) - Inner band decorationInterior of the ring shows a continuous decorative swirl or cloud pattern etched or cast into the inner wall.
1 region
x 0.28 · y 0.37 · w 0.44 · h 0.14 (high) - Edge detailTop rim of the ring is smoother and reflective compared with the textured outer face, forming a narrow polished band around the opening.
1 region
x 0.18 · y 0.35 · w 0.64 · h 0.06 (high)
Other
Studio product shot on a clean white background with soft shadow beneath the ring; camera centered on the ring front with shallow depth of field.
- Shot compositionRing centered horizontally near vertical middle-lower of frame and photographed from a slightly elevated front angle so the outer face is primary.
- Background and surfaceUniform white background and glossy white surface producing a soft diffuse reflection and a faint shadow under the ring to the lower right.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Focus and lightingSharp focus on the front outer ring face with smooth falloff to the back edge; diffuse studio lighting from above creates bright highlights on raised metal.
- Image qualityHigh resolution with visible fine texture and crisp edges; no visible noise or compression artifacts.
Colors
polished silver· raised outer surfacesantiqued dark gray· recessed grooves and patina- Band geometryWide circular metal band with flat outer faces and a rounded inner edge visible at the top rim.
- 03
Product
A wide silver-toned metal band ring photographed from the front; the exterior surface is heavily textured with high-relief animal motif(s) and darkened recessed areas. The inner band shows a repeating swirl pattern.
- Band geometryWide cylindrical metal ring band with flattened outer profile and rounded inner edge visible at the top opening.
1 region
x 0.06 · y 0.45 · w 0.88 · h 0.30 (high) - High-relief striped figureRaised animal figure with distinct vertical stripe marks across its flank that visually read as a tiger-like motif on the front-facing section of the band.
1 region
x 0.12 · y 0.55 · w 0.56 · h 0.22 (high) - Adjacent high-relief creature detailAnother raised creature or head-form with layered texturing and curved elements sits to the right of the striped figure; the form is sculpted in high relief and integrates with surrounding textured motifs.
1 region
x 0.60 · y 0.52 · w 0.34 · h 0.28 (medium) - Textured recessed backgroundDarkened recessed areas around the raised motifs create high contrast and a coarse, pebbled texture filling the rest of the band surface.
1 region
x 0.08 · y 0.48 · w 0.84 · h 0.26 (high) - Interior swirl patternInterior wall of the ring has a repeating swirl or wave motif etched into the metal and visible through the top opening.
1 region
x 0.22 · y 0.40 · w 0.56 · h 0.12 (high) - Polished rim finishTop rim of the band is smoother and more polished than the textured outer surface, showing brighter specular highlights.
1 region
x 0.08 · y 0.44 · w 0.84 · h 0.06 (high)
Other
Studio shot on a white background showing the front of the ring resting on a flat surface with soft shadowing and even overhead lighting.
- Shot compositionRing centered horizontally in frame, photographed near table level with the camera roughly aligned to the band plane for a front-facing view.
- Background and surfaceSmooth white background and white flat surface with a soft gray shadow on the right side of the ring.
- Lighting and reflectionsSoft diffuse overhead lighting producing even illumination and subtle specular highlights on the polished rim and raised metal surfaces.
- Image qualitySharp focus on the ring's front relief details with shallow depth of field toward the rear interior; no visible text or labels in the scene.
Colors
polished silver· raised metal surfaces#C4BCB3dark oxidized gray· recessed and patinated areas#3D3C3A- Band geometryWide cylindrical metal ring band with flattened outer profile and rounded inner edge visible at the top opening.
Variants
4 SKUs| SKU | Title | Price | Avail |
|---|---|---|---|
| 4708255 | Etched Tiger And Dragon Ring - Silver - 8 | CA$109.00 | Yes |
| 4708256 | Etched Tiger And Dragon Ring - Silver - 9 | CA$109.00 | Yes |
| 4708257 | Etched Tiger And Dragon Ring - Silver - 10 | CA$109.00 | Yes |
| 4708258 | Etched Tiger And Dragon Ring - Silver - 11 | CA$109.00 | Yes |