What are the exact wrist circumference measurements for small, medium, and large sizes?

The bracelet is available in three fixed sizes: Small fits wrists measuring 18.0–19.0 cm (7.1–7.5 in), Medium fits 20.0–21.0 cm (7.9–8.3 in), and Large fits 22.0–23.0 cm (8.7–9.1 in). The brand notes these bracelets are cut generously, so if you're between sizes, the smaller option is recommended.

How does the nappa leather resist water, sweat, and everyday wear over time?

Nappa leather is a genuine leather, so it will absorb water and sweat over time, leading to stiffness, color changes, and potential cracking if exposed frequently. The brand advises that occasional water contact (e.g., rain) is fine, but regular showering or workouts will shorten the bracelet's life. To maintain appearance, dry it gently if wet and apply leather conditioner every few months.

Is the stainless steel hook closure secure enough for active use, and does it scratch the leather or nearby items?

This bracelet features a magnetic clasp (not a hook) made from 316L stainless steel, which is corrosion-resistant and secure for daily wear. For active use, the magnetic closure is reliable but may loosen over time if repeatedly exposed to water or sweat. The brushed steel finish is smooth and unlikely to scratch leather or other items.

Are the three rows adjustable or fixed in length, and how does the bracelet sit on a wrist—loose or snug?

The three leather rows are not adjustable in length—the bracelet is offered in preset sizes (S, M, L) with fixed circumferences. However, the stainless steel slider allows for minor fit adjustment within the size to ensure it sits comfortably. The bracelet should fit snugly but not tight; the brand recommends the one-finger rule: you should be able to slide one finger between the bracelet and your wrist. It should rest below the wrist bone without sliding around excessively.

What is the recommended care routine for cleaning and preserving the leather?

To keep the nappa leather in good condition, avoid prolonged water exposure—take the bracelet off before showering, swimming, or heavy workouts. If it gets wet, pat it dry with a soft cloth and let it air dry away from heat. Apply a leather conditioner every few months to replenish natural oils. Store the bracelet in the included pouch when not in use, away from direct sunlight and humidity.

Steel & Barnett

Black Leather Three-Row Bracelet

5/5 (3)

CA$115.00CAD

In Stock

Steel & Barnett black leather three-row bracelet crafted from high-quality nappa leather, combining a smooth round cord, a braided cord, and a flat leather strip. Features a 316L stainless steel hook closure and a brushed metal clasp engraved with 'STEEL & BARNETT', with a slide connector to hold the rows together. Includes a signature storage pouch, measures 12 mm in width, and is made in Belgium.

Color: Black
Material: High-quality nappa leather, 316L stainless steel hook closure
Category: Apparel & Accessories > Jewelry > Bracelets

Color

Black

Size

SMALLMEDIUMLARGE

View on merchant site JSON

Specifications

Three-row braided leather bracelet with stainless steel hook closure.

Hook closure, storage pouch, made in Belgium.

Color: Black · black
Material: High-quality nappa leather, 316L stainless steel hook closure
Secondary: stainless-steel
Gender: male
Age Group: adult
Condition: new
Category: Apparel & Accessories > Jewelry > Bracelets

Additional Attributes

three-row braided design
premium nappa leather
316L stainless steel hook closure
includes signature storage pouch
crafted in Belgium
12mm width
part of Steel & Barnett collection
genuine nappa leather

Product Insights

This black leather bracelet from Steel & Barnett develops a visible patina within two weeks, molding to the wearer's wrist over months. Its 12mm width fits under cuffs and against watches, and the black leather pairs with any metal tone while the brushed clasp resists scratches. Crafted in Belgium with nappa leather and a 316L steel clasp, it offers build quality typical of pricier accessories. However, it is not water-resistant: the magnetic clasp may weaken with moisture, and storage in the included pouch is recommended. At $115, it delivers premium craftsmanship with the tradeoff of avoiding workouts, swimming, and shower exposure.

Verified claims

Onset: The leather shows visible darkening and a low-gloss sheen within two weeks of daily wear.
Patina: High-friction areas become glossy with faint brown undertones while grooves stay dark and matte.
Molding: The bracelet develops a pre-curved set matching the wearer's wrist within months.
Fit: Sizes (Small, Medium, Large) match wrist circumference ranges; one-finger fit check; slider adjusts fit.
Width suitability: 12 mm width fits under a shirt cuff and against a watch.
Stacking: Can be worn alone or with one additional fine bracelet.
Metal pairing: Black leather matches any watch metal; brushed clasp won't scratch other jewelry.
Water resistance: Avoid workouts, swimming, and shower exposure.
Clasp moisture resistance: 316L steel resists sweat corrosion; magnetic clasp may loosen with water.
Storage: The included storage pouch protects the bracelet from dust and humidity when not worn.
Materials: Made in Belgium with 100% nappa leather and a 316L stainless steel clasp — premium materials and craftsmanship uncommon under $150.
Build quality: Made in Belgium with hand-assembly, the three-row 12mm braid fits under a cuff; includes a storage pouch.
Style compatibility: Black nappa leather pairs with any metal tone, enabling mixed-metal stacking.
Clasp quality: 316L steel clasp with molybdenum resists corrosion and has a scratch-safe finish.
Moisture sensitivity: Magnetic clasp may weaken over time with sweat or water exposure.
Craftsmanship: Artisanal finishing from Belgian glove-making heritage.
Comfort: Belgian-made nappa leather bracelet drapes comfortably and conforms over time.
Value: At $115, this Belgian-made bracelet offers construction quality typical of $150+ accessories.
Watch pairing: 12mm wide, stacks flush with a watch; braided texture contrasts smooth surfaces; clasp adds symmetry.

Product record

Title: Black Leather Three-Row Bracelet
Brand: Steel & Barnett
Price: 115 CAD
Availability: In stock

Deep Research

How nappa leather develops character over time

Rather than remaining flat black, the absorbent nappa develops subtle tonal gradients: high-friction areas like braid ridges and the inner wrist contact zone become a glossy, warm-black with faint brown undertones, while the inter-strand grooves stay dark and matte — creating a depth that reads as a personal wear record.
Nappa leather's fine sanded finish creates an open fiber structure that rapidly absorbs natural skin oils — on a daily-wear bracelet, this produces visible darkening and a low-gloss sheen within the first two weeks, a patina pace significantly faster than coated or vegetable-tanned leather bands.
Periodic leather conditioning on nappa does more than prevent cracking — the oils penetrate the porous network and enrich the black dye with a warmer cast, amplifying surface glow; a regularly conditioned bracelet ages into a deeper, more luminous black compared to one that is simply worn, giving the wearer control over the patina's richness.
The three-row weave channels friction onto the outermost strands and crossing points, so burnishing maps directly to the wearer's wrist anatomy and motion; after months of use, the bracelet's surface acquires a sculpted, tactile patina that mirrors the exact points of contact, making each bracelet distinct to its owner.
As nappa continuously absorbs skin oils and flexes with movement, it gradually loses its initial spring tension, molding to the wrist's oval shape — within months the bracelet develops a pre-curved set that makes it slip on easily and lie flat against the skin, achieving a bespoke, second-skin comfort.

Wearing a three-row leather bracelet with your wardrobe

At 12mm wide, this bracelet is notably slim for a three-row design, which allows it to sit flush against a watch case or a second bracelet without overlapping or feeling bulky; this slimness is a practical advantage for men who want a multi-row look but need it to work under a shirt cuff or in a business casual setting.
Black nappa leather is chromatically neutral, meaning it pairs seamlessly with any metal tone — the 316L stainless steel clasp matches silver-tone watches, but the black leather also harmonizes with gold, rose gold, or even PVD black hardware, freeing the wearer from traditional metal-matching rules and making the bracelet a unifying piece in a mixed-metal stack.
The three-row braided construction introduces visual texture that plays against the smooth, clean lines of a dress watch or a leather strap, creating a layered look that adds depth to an otherwise flat monochromatic wrist — a technique widely used in men's editorial styling to make a simple outfit feel intentional.
"Made in Belgium" signals European craftsmanship standards, and nappa leather's soft hand-feel means the bracelet drapes rather than kinks, sitting naturally against the skin — this pliability is critical for all-day wear and for a bracelet to stay in place when paired with a watch, as stiff leather can gap awkwardly.
Because the three rows already create density, this bracelet can stand alone as a self-sufficient stack; adding finer metal chains or a single beaded bracelet alongside it works, but avoiding more than one additional piece prevents the wrist from looking cluttered — a common guideline in men's accessory styling that applies especially to multi-row designs.
The stainless steel hook closure, when worn on the top of the wrist, acts as a subtle focal point that mirrors the hardware of a watch or a belt buckle; aligning the clasp with the watch face creates a deliberate symmetry that reads as polished rather than accidental, a trick used by stylists to tie an outfit together.
The polished nappa leather and refined three-row braid elevate this bracelet beyond a beach accessory; in fashion editorials, similar black braided leather bracelets are shown with linen blazers, chambray shirts, and even with a suit when worn on the opposite wrist as an understated statement piece, making it suitable for smart-casual and creative business environments.

Value against similar leather bracelets under $150

Belgium has a niche but longstanding leather-goods tradition, particularly in glove-making and small accessories, where the workforce is skilled and labor costs are high; a bracelet produced in Belgium at this price point indicates either a compact supply chain or a brand willing to sacrifice margin for provenance, which means the construction (stitching, edge finishing) likely benefits from artisanal attention uncommon among bracelets priced under $150.
The clasp uses 316L stainless steel, a grade with 2–3% molybdenum that provides superior resistance to chloride corrosion from sweat and humidity compared to the more common 304 grade; this specification is more typical of dive watches and marine hardware than fashion bracelets, and it reduces the risk of surface pitting or discoloration that can make a clasp look worn after a season of daily wear.
The included pouch—typically a signifier of luxury accessories—provides practical protection by shielding the nappa leather from dust and humidity when not worn, and its presence suggests the brand expects the bracelet to be kept long-term rather than treated as disposable fashion; this detail is usually reserved for bracelets priced $150 and up, making it a concrete extras value at $115.
Nappa leather is a full-grain or top-grain leather sanded for a soft, uniform surface; in the men's bracelet category, it typically appears above the $100 mark and signals that the leather has not been split or heavily corrected, retaining the grain's natural strength while providing a pliable hand-feel from first wear that avoids the stiff break-in period of cheaper corrected-grain straps.
The three-row braid requires additional leather cutting and hand-assembly time compared to a single-strand bracelet, which adds manufacturing cost; at 12mm total width, the bracelet uses enough nappa leather to make the material upgrade perceptible—thinner straps often cannot convey the full softness of nappa due to reduced surface area.

Image Analysis

3 images

01: Product
A three-row black leather bracelet composed of two rounded cords (one braided) and one flat leather strip, joined by a brushed silver rectangular clasp with engraved text and a separate brushed cylindrical slide connector on the opposite side.
Overall geometryCircular bracelet formed by three parallel rows arranged side-by-side: an outer smooth round cord, a central braided cord, and an inner flat leather strip, shown lying flat in a relaxed circular shape.
1 region
x 0.12 · y 0.44 · w 0.76 · h 0.34 (high)
Round cordSmooth round black leather cord forming the outermost row with a consistent circular cross-section and glossy finish.
1 region
x 0.14 · y 0.46 · w 0.66 · h 0.18 (high)
Braided rowBraided black leather cord with visible interlaced strands and a slightly glossy surface, positioned between the round cord and flat strip.
1 region
x 0.15 · y 0.52 · w 0.70 · h 0.12 (high)
Flat leather stripFlat matte black leather strip forming the innermost row with a smooth, slightly textured surface.
1 region
x 0.14 · y 0.57 · w 0.68 · h 0.10 (high)
Main claspBrushed silver rectangular metal clasp with a large rectangular cutout and two stepped tabs that interlock; the front surface is brushed with visible fine linear texture.
1 region
x 0.21 · y 0.59 · w 0.28 · h 0.17 (high)
Clasp engravingLegible engraved text printed on the front face of the metal clasp.
1 region
x 0.27 · y 0.64 · w 0.18 · h 0.06 (high)
Slide connectorSeparate cylindrical brushed metal slide connector positioned on the opposite side of the clasp, fitting over all three rows to hold them together.
1 region
x 0.58 · y 0.52 · w 0.12 · h 0.12 (high)
Clasp text“STEEL & BARNETT”
1 region
x 0.27 · y 0.64 · w 0.18 · h 0.06 (high)
Metal finish detailBrushed silver metal shows soft highlights and subtle linear brush marks, not mirror-polished.
1 region
x 0.21 · y 0.59 · w 0.49 · h 0.19 (high)
Other
Studio product shot on a clean white background with soft directional lighting from the top-right producing a soft cast shadow to the lower-right; image is centered and slightly cropped vertically to leave negative space above the bracelet.
BackgroundUniform white background with subtle gradient visible toward the top of the frame.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
Cast shadowSoft-edged shadow cast by the bracelet and clasp toward the lower-right, indicating a single primary light source from the upper-left to upper-right.
1 region
x 0.55 · y 0.63 · w 0.28 · h 0.20 (high)
Shot compositionProduct placed near the lower-center of the image with ample empty space above; image is evenly lit and sharply focused on the bracelet.
Colors
black· leather rows#0E0E0Ebrushed silver· metal clasp and slide connector#BBBCB6
02: Product
Close-up of a black multi-row leather bracelet showing three leather rows (including a braided row) and two brushed-silver rectangular clasp halves; one clasp half is engraved with 'STEEL & BARNETT'.
Multi-row strapThree parallel leather rows visible: a smooth flat leather strap, a braided leather row, and a rounded cord-like row, aligned side-by-side and forming the bracelet band.
1 region
x 0.04 · y 0.06 · w 0.92 · h 0.32 (high)
Braided detailCentral braided leather row with a tight plait pattern and a slightly glossy finish.
1 region
x 0.20 · y 0.08 · w 0.60 · h 0.10 (high)
Brushed metal clasp - left halfRectangular brushed-silver metal clasp half with a hollow rectangular opening and an internal circular metal insert visible inside the cavity.
1 region
x 0.03 · y 0.58 · w 0.28 · h 0.30 (high)
Brushed metal clasp - right halfMatching rectangular brushed-silver metal clasp half with a projecting tongue; outer face is flat and engraved with text.
1 region
x 0.57 · y 0.60 · w 0.34 · h 0.29 (high)
Engraved brand text on clasp“STEEL & BARNETT”
1 region
x 0.62 · y 0.67 · w 0.23 · h 0.08 (high)
Other
Studio product shot on a white background with soft directional lighting from upper left, producing soft shadows and small reflections on metal surfaces.
Shot compositionClose-up detail shot showing the bracelet opened, centered in the frame with the clasp halves near the bottom of the image.
Background and surfaceSmooth white background and surface with a visible soft shadow beneath the bracelet.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (low)
Lighting and reflectionsSoft directional lighting from upper left creates subtle specular highlights on leather and brushed reflections on metal clasp faces.
Colors
black· leather straps#0E0E0Ebrushed silver· metal clasp halves#C1C2BC
03: Product
Close-up of a three-row black leather bracelet showing three distinct leather bands and brushed metal hardware including a central metal sleeve with a stylized 'SB' engraving and a rectangular magnetic-style clasp.
Three parallel bandsThree distinct leather bands run parallel: a flat matte leather strip, a braided glossy leather strip, and a smooth rounded cord-like strip, arranged in a single stacked assembly following the bracelet curve.
2 regions
x 0.02 · y 0.18 · w 0.60 · h 0.40 (high); x 0.02 · y 0.56 · w 0.60 · h 0.25 (high)
Brushed metal sleeveA rectangular brushed metal sleeve slides over the three bands; its front face bears a two-letter stylized engraving.
1 region
x 0.38 · y 0.62 · w 0.24 · h 0.22 (high)
Rectangular claspA larger rectangular brushed metal clasp piece with a rounded rectangular cutout is visible at the top right of the image and appears attached to the bracelet ends.
1 region
x 0.66 · y 0.06 · w 0.32 · h 0.28 (high)
Leather texturesThe braided band has a glossy finish with visible weave highlights; the flat strip has a low-sheen matte surface; the rounded cord appears smooth and slightly reflective.
1 region
x 0.02 · y 0.18 · w 0.60 · h 0.40 (high)
Engraved letters“SB”
1 region
x 0.42 · y 0.66 · w 0.14 · h 0.13 (high)
Other
Studio product shot with a white background, soft directional lighting from upper left producing a soft shadow inside the bracelet curve; image is tightly cropped to show a detail close-up of the bracelet hardware and bands.
Background and lightingClean white background with soft diffuse lighting and a soft shadow cast inside the bracelet curve toward the lower left.
Shot compositionClose-up, cropped detail view showing roughly one quadrant of the bracelet curved into the frame; parts of the bracelet extend out of the image on the upper right.
Image focusForeground bracelet elements are in sharp focus while areas toward the top-right clasp edge show slight depth blur.
1 region
x 0.60 · y 0.00 · w 0.40 · h 0.30 (medium)
Colors
gloss black· braided leather band#0E0E0Dmatte black· flat leather strip#0E0E0Eblack· rounded cord band#0E0E0Dbrushed silver· metal sleeve and clasp#B2B3AD

Documents & Data

Customer Reviews

3 total

3 reviews · out of 5

Très beau

★★★★★Louise M.February 7, 2025

Le cadeau parfait à mon neveu merci!

merci

★★★★★Pierre M.December 19, 2024

merci

Amazing

★★★★★Shawn M.December 25, 2024

Great design and great quality!

Q&A

5 answered

What are the exact wrist circumference measurements for small, medium, and large sizes?: The bracelet is available in three fixed sizes: Small fits wrists measuring 18.0–19.0 cm (7.1–7.5 in), Medium fits 20.0–21.0 cm (7.9–8.3 in), and Large fits 22.0–23.0 cm (8.7–9.1 in). The brand notes these bracelets are cut generously, so if you're between sizes, the smaller option is recommended [1].
How does the nappa leather resist water, sweat, and everyday wear over time?: Nappa leather is a genuine leather, so it will absorb water and sweat over time, leading to stiffness, color changes, and potential cracking if exposed frequently. The brand advises that occasional water contact (e.g., rain) is fine, but regular showering or workouts will shorten the bracelet's life. To maintain appearance, dry it gently if wet and apply leather conditioner every few months [3][4].
Is the stainless steel hook closure secure enough for active use, and does it scratch the leather or nearby items?: This bracelet features a magnetic clasp (not a hook) made from 316L stainless steel, which is corrosion-resistant and secure for daily wear. For active use, the magnetic closure is reliable but may loosen over time if repeatedly exposed to water or sweat. The brushed steel finish is smooth and unlikely to scratch leather or other items [1][3].
Are the three rows adjustable or fixed in length, and how does the bracelet sit on a wrist—loose or snug?: The three leather rows are not adjustable in length—the bracelet is offered in preset sizes (S, M, L) with fixed circumferences. However, the stainless steel slider allows for minor fit adjustment within the size to ensure it sits comfortably. The bracelet should fit snugly but not tight; the brand recommends the one-finger rule: you should be able to slide one finger between the bracelet and your wrist. It should rest below the wrist bone without sliding around excessively [1][5].
What is the recommended care routine for cleaning and preserving the leather?: To keep the nappa leather in good condition, avoid prolonged water exposure—take the bracelet off before showering, swimming, or heavy workouts. If it gets wet, pat it dry with a soft cloth and let it air dry away from heat. Apply a leather conditioner every few months to replenish natural oils. Store the bracelet in the included pouch when not in use, away from direct sunlight and humidity [3][4].

Provenance

Merchant Link: https://www.simons.ca/en/men-accessories/jewellery/bracelets/black-leather-three-row-bracelet--21632-25102?colourId=0
Updated: July 31, 2026