Le 31
Bead And Chain Double Bracelet
This is a double-layer bracelet featuring a beaded strand paired with a flat curb chain. Crafted from stainless steel with a polished silver finish, it closes with a snap hook and measures 20.5 cm (8 inches) in length and 9 mm in width. It is designed for wearing on the wrist as a jewelry accessory.
- Material
- Stainless steel
- Gender
- unisex
- Category
- Apparel & Accessories > Jewelry > Bracelets
Color
Size
Specifications
Stainless steel double bracelet with bead and chain design, featuring snap hook closure.
Double bracelet design, bead and chain combination, snap hook closure.
- Material
- Stainless steel
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Category
- Apparel & Accessories > Jewelry > Bracelets
Additional Attributes
- stainless steel construction
- snap hook closure
- double bracelet design
- bead and chain combination
- designed in Canada
- length: 20.5 cm
- width: 9 mm
- exclusive design
Product Insights
The Bead And Chain Double Bracelet by Le 31 is a solid stainless steel piece designed in Canada that offers the value of two bracelets in one, with a deliberate bead-and-chain aesthetic. Its construction resists dents, tarnish, and rust thanks to a self-healing chromium-oxide layer, and it is water-safe with simple care. The main tradeoff is a snap-hook clasp that is secure for daily wear but can open if snagged.
- Clasp security
Snap hook is secure in daily wear but can open if snagged.
Why this is supported
The product Q&A addresses the clasp's security:
it can potentially open if the hook is snagged or pulled with enough force
Does the snap hook closure have a locking mechanism, or can it accidentally open during wear?. It also states that
for normal everyday wear it is secure and reliable
Does the snap hook closure have a locking mechanism, or can it accidentally open during wear?- Construction
Solid stainless steel beads feel heavier and resist dents better than hollow alternatives
Why this is supported
Many sub-C$50 men's bracelets use hollow or plated beads to cut costs, but the Le 31 bracelet uses solid stainless steel beads. This construction
avoids the lightweight, dent-prone feel
How it compares to other stainless steel options — solid_stainless_steel_beadsand
provides durable articulation
How it compares to other stainless steel options — solid_stainless_steel_beadsAdditionally, because the beads are solid stainless steel rather than plated, there is no coating to chip or wear away, so the finish lasts.
Scratch it and it quietly re-forms on its own.
stylr.usSurface grime from daily wear
It wipes right off, because it is grime, not corrosion.
stylr.usThese qualities combine to deliver a heavier, more durable feel than hollow alternatives.
- Value
Doubles as two bracelets in one piece, saving money and adjustment effort.
Why this is supported
The double-strand design integrates a beaded line and a curb chain into a single bracelet, eliminating the need to purchase separate pieces and coordinate their alignment. This effectively halves the cost and ensures a consistently balanced layered appearance.
- Design origin
Designed in Canada by Le 31 Simons, the bead-and-chain pairing is a deliberate aesthetic choice.
Why this is supported
Le 31 by Simons is a house label designed in Canada, meaning the bead-and-chain composition is a deliberate aesthetic choice rather than a generic factory design, adding a curated element to the piece.
- Care
Haze from lotion or sweat wipes off; water-safe but rinse after salt/chlorine.
Why this is supported
A dull film on the bracelet is often just surface buildup —
Surface buildup. Lotion, sunscreen, soap film, and sweat residue leave a haze that looks like dulling. It wipes right off, because it is grime, not corrosion.
stylr.usSo a simple clean with mild soap and water restores the finish. The bracelet can be worn in water, but
Rinse with fresh water after the ocean or a chlorinated pool to
stylr.usmaintain its best appearance.
- Durability
Solid stainless steel with self-healing scratch layer; hypoallergenic and tarnish-resistant.
Why this is supported
The beads use
solid stainless steel construction here avoids the lightweight, dent-prone feel
How it compares to other stainless steel options — solid_stainless_steel_beads. The steel itself has
an ultra-thin, invisible film called a chromium-oxide passive layer. That film seals the surface so water, sweat, and air cannot reach the metal beneath. Scratch it and it quietly re-forms on its own.
stylr.us. This makes it
generally corrosion-resistant and safe for most people with sensitive skin.
Is the stainless steel grade used in this bracelet (e.g., 316L) known to be hypoallergenic and resistant to tarnish?.
- Water resistance
Stainless steel resists water corrosion and self-heals scratches
Why this is supported
Catalog verified the bracelet's water resilience through technical documentation. As stated by stylr.us:
an ultra-thin, invisible film called a chromium-oxide passive layer. That film seals the surface so water, sweat, and air cannot reach the metal beneath. Scratch it and it quietly re-forms on its own.
stylr.usThis passive layer prevents rust and tarnish even after scratching. Additionally, a QA resource states:
The bracelet is made entirely of stainless steel, and the beads are solid stainless steel, not plated or hollow.
Is the bead part of the bracelet solid metal or plated/hollow?This construction ensures water exposure won't cause internal corrosion or structural damage.
The beads are solid stainless steel, confirmed in Q&A. The stainless steel's passive oxide layer makes the bracelet resistant to tarnish, water, and sweat; minor scratches self-heal.
Scratch it and it quietly re-forms on its own.
stylr.us. The bracelet is also water-resistant; after ocean or pool use,
Rinse with fresh water after the ocean or a chlorinated pool to
stylr.usrestore the finish with mild soap.
Catalog Research verified through the Q&A that the beads are solid stainless steel:
the beads are solid stainless steel, not plated or hollow.
Is the bead part of the bracelet solid metal or plated/hollow?The deep research on stainless steel confirms the material forms a passive layer that seals against water and sweat:
This layer ensures the bracelet resists tarnish and can be worn during showers and swimming. After saltwater or chlorinated water, a rinse is advised:
Finally, any surface haze from residues like lotion or sweat is easily cleaned:
It wipes right off, because it is grime, not corrosion.
stylr.us- Maintenance
Rinse after pool or ocean; wipe off lotion haze with mild soap.
Why this is supported
Catalog verified the maintenance guidelines from stylr.us: after saltwater or chlorinated pool,
Rinse with fresh water after the ocean or a chlorinated pool to
stylr.usprevent spotting. It also notes that any dull film is simply
Surface buildup. Lotion, sunscreen, soap film, and sweat residue leave a haze that looks like dulling. It wipes right off, because it is grime, not corrosion.
stylr.usSo simple soap and water restore the polish.
- Tarnish resistance
Chromium-oxide layer reforms when scratched, preventing tarnish and rust.
Why this is supported
The bracelet's stainless steel uses a self-healing chromium-oxide passive layer.
an ultra-thin, invisible film called a chromium-oxide passive layer. That film seals the surface so water, sweat, and air cannot reach the metal beneath. Scratch it and it quietly re-forms on its own.
stylr.usThis property ensures the bracelet resists tarnish and corrosion from daily wear, including water, sweat, and chlorine. It is also hypoallergenic and safe for sensitive skin. Surface haze from lotions or soap is just buildup that wipes away.
Image Analysis
1 images- 01
Product
A double-layer silver-tone bracelet composed of one beaded strand of polished metal spheres paired with a flat curb-style chain, shown laid flat with visible end hardware and clasp.
- Beaded strandSingle strand of polished spherical metal beads strung on a thin wire or link, forming one layer of the double bracelet and arranged in a near-circular layout.
1 region
x 0.20 · y 0.56 · w 0.60 · h 0.18 (high) - Curb chainFlat curb-style chain with closely interlocking twisted links forming the second layer of the bracelet, lying parallel to the beaded strand.
1 region
x 0.16 · y 0.65 · w 0.68 · h 0.14 (high) - Clasp and end hardwareMetal lobster-claw clasp attached to a small jump ring on one end and a rectangular metal barrel or end cap joined to the beaded strand on the other; both pieces are polished metal and located at the top center of the bracelet.
1 region
x 0.43 · y 0.40 · w 0.14 · h 0.12 (high) - Surface finishAll visible components have a highly reflective, polished metallic finish producing distinct highlights and reflected studio lighting.
- ArrangementBracelet is laid flat on a light background with the two layers roughly concentric and the clasp positioned near the top center of the composition.
Other
Studio-style product shot on a plain light background with soft shadows; composition is top-down with slight perspective showing the bracelet laid flat near the lower half of the frame.
- BackgroundSmooth off-white or very light neutral background occupying the full image, with subtle shadowing under the bracelet.
- Lighting and shadowSoft directional studio lighting from above-left causing mild cast shadows to the lower-right of the bracelet and bright specular highlights on metal surfaces.
- Shot compositionBracelet centered horizontally and positioned in the lower third of the image with generous negative space above.
Colors
polished silver· metal components#BBBBB3- Beaded strandSingle strand of polished spherical metal beads strung on a thin wire or link, forming one layer of the double bracelet and arranged in a near-circular layout.