Tuxedo Stud Set Set Of 3 Pairs

This three-pair tuxedo stud set from Mon Art, priced at 250 CAD and in stock, uses a consistent swivel-back mechanism across all pairs to keep the genuine mother-of-pearl face centered and isolate torsional stress, preventing inlay wear. The 12mm pair fits cuffs while the two 8mm pairs serve as shirt studs, with one-handed fastening for a secure lock. Mother-of-pearl shows natural white/cream iridescence and variation, requiring careful maintenance—avoid water, chemicals, and perfume, clean with a soft cloth, and apply metal polish only to brass.

Fastening

One-handed fastening with a secure lock and centered face.

Why this is supported

The hinged toggle rotates for one-handed insertion and then locks flat against the cuff.

the 12mm mother-of-pearl face stays centered and upright on the cuff, presenting the inlay's iridescence squarelyHow swivel back cufflinks work — face_orientation

. The lock is secure,

outperforming the friction-fit retention of bullet backs or the variable hold of magnetic closures while eliminating the small parts that can detach from chain-link backsHow swivel back cufflinks work — toggle_lock_security

. This design ensures the face remains centered and low-profile during wear.

Inlay protection

Isolates torsional stress from the mother-of-pearl inlay to prevent wear.

Why this is supported

The swivel back channels twisting force away from the mother-of-pearl inlay.

The swivel back isolates the twisting motion to the toggle instead of the decorative face, meaning the mother-of-pearl inlay experiences minimal torsional stressHow swivel back cufflinks work — torque_relief_for_the_inlay

. This reduces the risk of the inlay loosening over time. Care instructions advise

Avoid exposing mother-of-pearl to moisture, chemicals, or perfume, as these can weaken the adhesive and cause the inlay to lift or fall outWhat is the recommended care for the mother-of-pearl inlay and brass construction? Can they be exposed to water or cleaning chemicals?

. The swivel back’s design thus helps preserve the inlay by reducing direct handling during dressing.

Set consistency

All three pairs share the same swivel back; smaller pair fits shirt fronts.

Why this is supported

The set includes three pairs of cufflinks, each with the same swivel-back mechanism.

This set includes 3 pairs of cufflinks only—no shirt studs.Does this set include 3 pairs of cufflinks only, or does it also include matching shirt studs? The description mentions both cufflink and stud dimensions, so which items are included?

The two smaller pairs (8mm face width) are intended for the shirt front, as noted:

The smaller cufflinks (8mm face width) are intended for the shirt front and should fit standard dress shirt buttonholesAre the studs designed to fit standard tuxedo shirt buttonholes (typically around 5-6mm), or do they require specific shirt dimensions? The stud width is 8mm, so what is the post length?

. This means the set provides a uniform fastening feel whether used for cuffs or shirt fronts.

Contents

Set contains only cufflinks; smaller 8mm pairs serve as shirt studs.

Why this is supported

The product is advertised as a 'Tuxedo Stud Set' and mentions stud dimensions, but Q&A responses clarify it contains only cufflinks.

This set includes 3 pairs of cufflinks only—no shirt studs. The largest pair has a 12mm width, and the two smaller pairs have an 8mm width [1].Does this set include 3 pairs of cufflinks only, or does it also include matching shirt studs? The description mentions both cufflink and stud dimensions, so which items are included?

This set comprises three pairs of cufflinks rather than shirt studs.Are the studs designed to fit standard tuxedo shirt buttonholes (typically around 5-6mm), or do they require specific shirt dimensions? The stud width is 8mm, so what is the post length?

The smaller cufflinks (8mm face width) are intended for the shirt front and should fit standard dress shirt buttonholes, though we don't have the exact post length.Are the studs designed to fit standard tuxedo shirt buttonholes (typically around 5-6mm), or do they require specific shirt dimensions? The stud width is 8mm, so what is the post length?

Mother-of-pearl

Genuine mother-of-pearl, naturally white/cream with iridescence and piece-to-piece variation.

Why this is supported

The brand confirms:

The mother-of-pearl has a natural white/cream color with an ethereal, shifting lustre [1]. As an organic material, there can be subtle variations in color and pattern between individual pieces.Is the mother-of-pearl a natural white/cream color, or does it have iridescent tones? Are there variations in color between pieces?

This verifies the authentic organic character described.

Swivel back

Swivel-back mechanism keeps the mother-of-pearl face centered and protects the inlay from torsional stress.

Why this is supported

The swivel-back design serves two roles:

The swivel back isolates the twisting motion to the toggle instead of the decorative face, meaning the mother-of-pearl inlay experiences minimal torsional stress when the cufflink is fastened or unfastenedHow swivel back cufflinks work — torque_relief_for_the_inlay

, and

Because the swivel mechanism anchors the cufflink from behind without relying on the face to turn during fastening, the 12mm mother-of-pearl face stays centered and upright on the cuff, presenting the inlay's iridescence squarelyHow swivel back cufflinks work — face_orientation

. These mechanical features ensure both immediate visual alignment and long-term inlay protection.

Care

Requisite care: avoid water, chemicals, perfume on mother-of-pearl; clean with soft dry cloth; metal polish on brass only.

Why this is supported

The care instructions state:

Avoid exposing mother-of-pearl to moisture, chemicals, or perfume, as these can weaken the adhesive and cause the inlay to lift or fall out [1]. Clean gently with a soft dry cloth.What is the recommended care for the mother-of-pearl inlay and brass construction? Can they be exposed to water or cleaning chemicals?

Additionally, metal polish should be used only on brass parts, avoiding the mother-of-pearl.

Sizing

The 12mm pair is for cuffs; the 8mm pairs fit standard shirt front buttonholes.

Why this is supported

The brand confirms that the set includes three pairs of cufflinks:

The largest pair has a 12mm width, and the two smaller pairs have an 8mm widthDoes this set include 3 pairs of cufflinks only, or does it also include matching shirt studs? The description mentions both cufflink and stud dimensions, so which items are included?

It further states that the smaller pair fits standard dress shirt buttonholes:

The smaller cufflinks (8mm face width) are intended for the shirt front and should fit standard dress shirt buttonholesAre the studs designed to fit standard tuxedo shirt buttonholes (typically around 5-6mm), or do they require specific shirt dimensions? The stud width is 8mm, so what is the post length?

And that the 12mm pair is for cuffs:

The 12mm pair is for the cuffs.Are the studs designed to fit standard tuxedo shirt buttonholes (typically around 5-6mm), or do they require specific shirt dimensions? The stud width is 8mm, so what is the post length?