Le 31
Watch Storage Case
This watch storage case is a compact travel case designed to hold and protect a single wristwatch during storage or transport. It features a genuine leather exterior with a textured grain, a soft microfibre interior lining, and a padded cylindrical cushion that the watch strap wraps around. Two metal snap fasteners secure the flap closure, and a stitched oval end panel reinforces the case structure.
- Material
- Genuine leather; soft microfibre interior
- Category
- Luggage & Bags > Luggage Accessories > Travel Pouches
Specifications
Genuine leather watch storage case with a soft microfibre interior and snap closure.
Genuine leather construction, soft microfibre interior, snap closure.
- Material
- Genuine leather; soft microfibre interior
- Gender
- male
- Age Group
- adult
- Condition
- new
- Category
- Luggage & Bags > Luggage Accessories > Travel Pouches
Additional Attributes
- Genuine leather
- Soft microfibre interior
- Snap closure
Product Insights
Compact travel pouch for storing and carrying one watch Genuine leather exterior with a textured black finish Soft microfibre interior that cushions the watch and creates a low-abrasion contact surface Padded cylindrical cushion holds the watch in place, but a firm cushion can gradually curve leather straps if stored tightly for long periods Snap hardware is a high-wear point; plated snaps can lose plating and weaken over long use Soft leather pouch offers separation and some padding but cannot match a rigid shell against crushing
Verified claims
- category
- Compact travel pouch for storing and carrying one watch
- exterior material
- Genuine leather exterior with a textured black finish
- interior material
- Soft microfibre interior that cushions the watch and creates a low-abrasion contact surface
- cushion firmness
- Padded cylindrical cushion holds the watch in place, but a firm cushion can gradually curve leather straps if stored tightly for long periods
- closure
- Snap closure with two visible metal fasteners on the flap
- closure durability
- Snap hardware is a high-wear point; plated snaps can lose plating and weaken over long use
- closure fit
- Snap fit matters: too loose may fall open, too tight can stress the surrounding leather
- lining colour
- Light grey neutral lining is preferable to deep-dyed interiors for long-term contact with pale straps and polished metals
- moisture management
- Microfibre lining can allow better air circulation than leather, helping limit humidity spotting on the case
- crown clearance
- Watch should sit without its crown pressing into a seam or the closure
- lid clearance
- Cushion height and case depth should clear tall crystals, pronounced bezels and thick cases
- fit security
- For travel, the watch should not slide, flip or rotate inside the case; if it does, the case is too loose
- abrasion protection
- Smooth microfibre interior reduces friction against the case, bezel, crystal and bracelet
- dust maintenance
- Plush microfibre can trap dust over time; periodic cleaning helps keep the interior clear
- leather care
- Wipe surface dust with a soft cloth, keep away from direct heat and sunlight, and store dry and uncrushed
- humidity storage
- For long-term leather storage, aim for stable 45–55% relative humidity at about 18–20°C
- hotel safe use
- The case can be placed inside a hotel safe to add security while keeping the watch physically protected
- magnetic shielding
- The case provides physical organization, not magnetic shielding; keep the watch away from magnetic chargers, speakers and phone mounts
- crush protection
- Soft leather pouch offers separation and some padding but cannot match a rigid shell against crushing
- styling
- Textured black exterior with light grey lining, contrast piping and an oval end cap gives a tailored, understated look
- variants
- Offered in a single black, one-size variant
Product record
- Title
- Watch Storage Case
- Brand
- Le 31
- Price
- 99 CAD
- Availability
- In stock
Buying Guide
0 comparisons · 3 sourcesUses
A compact case for carrying a watch when you travel
This small travel watch case holds a watch on a padded cylindrical cushion with a soft microfibre interior, so the piece stays nestled inside while in a bag or luggage. The rounded rectangular case with an oval end closes with snaps, keeping the watch enclosed in transit or in storage.[1,2,3]
Image Analysis
2 images- 01
Product
Partially open cylindrical watch storage case with a textured dark exterior and a soft grey interior, showing the oval end and two snap fasteners on the flap.
- Overall shapeRectangular shell folded into a U-shape around a central cylindrical cushion; visible oval end cap on the cushion.
1 region
x 0.35 · y 0.28 · w 0.50 · h 0.52 (high) - Exterior material and textureDark textured exterior with a fine crosshatch or Saffiano-like grain visible across outer panels and oval end cap.
1 region
x 0.05 · y 0.34 · w 0.58 · h 0.55 (high) - Interior liningSoft light grey suede- or microsuede-like lining covering the cushion and inner panels, with a slightly napped texture.
1 region
x 0.32 · y 0.22 · w 0.50 · h 0.50 (high) - Cylindrical cushionPadded cylindrical cushion wrapped in the same light grey lining, sitting inside the case and visible along the midline.
1 region
x 0.42 · y 0.34 · w 0.42 · h 0.42 (high) - Oval end capOval-shaped end cap covered in the same textured dark exterior material, with a stitched edge trim.
1 region
x 0.52 · y 0.50 · w 0.36 · h 0.34 (high) - Snap fastenersTwo visible round metal snap studs on the left exterior flap and one on the right inner flap, metallic finish.
3 regions
x 0.10 · y 0.36 · w 0.14 · h 0.12 (high); x 0.22 · y 0.36 · w 0.10 · h 0.10 (high); x 0.81 · y 0.10 · w 0.08 · h 0.08 (medium) - StitchingNarrow visible stitching along the perimeter of the oval end cap and along folded edges of the exterior panels.
1 region
x 0.48 · y 0.48 · w 0.42 · h 0.40 (high)
Other
Studio product shot on a light neutral background with soft shadow; low oblique close-up angle focusing on the open case.
- Shot compositionLow-angle close-up of the open case occupying the lower two-thirds of the frame, cropped at right and left edges.
- Background and surfaceEven light grey or off-white seamless background with a soft shadow beneath the product.
- Lighting and reflectionsSoft diffuse lighting producing mild highlights on the textured exterior and faint shadowing under the case.
Colors
textured black· exterior panels and oval end caplight grey suede· interior lining and cushionmetallic silver· snap fasteners- Overall shapeRectangular shell folded into a U-shape around a central cylindrical cushion; visible oval end cap on the cushion.
- 02
Product
A small rounded rectangular travel watch case with an oval end, textured black exterior, and a rounded flap closure with visible edge piping and stitching.
- Overall shapeRounded rectangular body with an oval end panel; the case appears boxy along its length with fully rounded corners and a separate top flap that follows the curved contour.
1 region
x 0.05 · y 0.20 · w 0.90 · h 0.62 (high) - Exterior textureCrosshatched fine grain texture covering the entire exterior surface, creating a subtle diagonal grid pattern across panels.
1 region
x 0.08 · y 0.24 · w 0.80 · h 0.56 (high) - Top flapRounded rectangular flap that folds over the front of the case; flap edge is slightly raised and follows the case contour.
1 region
x 0.28 · y 0.08 · w 0.48 · h 0.28 (high) - Edge piping and stitchingContrasting lighter-colored narrow piping and visible stitching run along the flap edge and around the oval end panel, creating a defined border.
1 region
x 0.44 · y 0.40 · w 0.46 · h 0.40 (high) - Oval end panelFlat oval end panel visible on the right side of the image with the same textured surface and a stitched seam where it meets the main body.
1 region
x 0.52 · y 0.38 · w 0.38 · h 0.38 (high) - Material appearanceExterior appears to be a coated or synthetic material with a semi-matte finish that reflects small highlights along the crosshatch ridges.
1 region
x 0.10 · y 0.22 · w 0.80 · h 0.56 (medium)
Other
Studio product shot on a light neutral background with soft shadow beneath the case; image is well lit with mild specular highlights on textured surface.
- Background and surfaceUniform light grey background with no visible props; case casts a soft shadow beneath and slightly to the lower left.
1 region
x 0.00 · y 0.00 · w 1.00 · h 1.00 (high) - Shot compositionThree-quarter angled view from slightly above and to the left, showing the top flap, curved side, and oval end panel.
- LightingSoft diffuse lighting with small specular highlights along the textured crosshatch ridges and no harsh shadows.
Colors
black· exterior body#131413medium grey· edge piping and visible stitching#BCBCBC- Overall shapeRounded rectangular body with an oval end panel; the case appears boxy along its length with fully rounded corners and a separate top flap that follows the curved contour.