Zair Regenerated Leather Briefcase

Luxurious regenerated leather briefcase with padded laptop compartment and removable crossbody strap.

Padded laptop compartment, removable adjustable crossbody strap, wheeled suitcase loop, recycled polyester lining, metal zip closure, removable leather ID tag holder, signature storage bag.

Material

Regenerated leather with recycled polyester lining

Secondary

polyester

Style

business, modern

Occasion

work, business-casual, travel

Gender

unisex

Age Group

adult

Condition

new

Dimensions

15 x 3 x 12 in

Category

Luggage & Bags > Briefcases

01

Product

Front-facing black briefcase with top handles, a detachable shoulder strap, two visible hanging tags, a top zipper, and two contrasting surface finishes (textured upper panel and smooth lower panel).

• Overall silhouetteRectangular briefcase seen from the front with slightly rounded top corners and a flat base, shown upright and centered in frame.
  1 region

  x 0.06 · y 0.20 · w 0.88 · h 0.68 (high)
• Top handlesPair of short, stitched top carry handles emerging from the top panel and joined at center; each handle is rounded and covered in the same textured material as the upper panel.
  1 region

  x 0.34 · y 0.14 · w 0.32 · h 0.18 (high)
• Adjustable shoulder strapLong detachable shoulder strap attached to both upper side D-rings with metal clasps; strap runs from top center toward the right and left edges and includes an adjustment slider.
  2 regions

  x 0.02 · y 0.00 · w 0.28 · h 0.38 (medium); x 0.35 · y 0.00 · w 0.63 · h 0.46 (high)
• Top zipper and pullFull-length top zipper visible along the top curvature with a slim silver zipper pull visible on the left side of the top edge.
  1 region

  x 0.12 · y 0.23 · w 0.76 · h 0.08 (high)
• Upper panel textureUpper half of the front panel has a fine crosshatch textured finish distinct from the lower panel.
  1 region

  x 0.10 · y 0.18 · w 0.80 · h 0.20 (high)
• Lower panel finishLower front panel has a smooth matte finish without visible texture, separated from the upper textured panel by a horizontal seam and narrow band.
  1 region

  x 0.05 · y 0.36 · w 0.90 · h 0.50 (high)
• Horizontal front band and seamA narrow horizontal band and visible stitched seam runs across the front slightly above mid-height, creating a visual separation between the textured and smooth panels.
  1 region

  x 0.08 · y 0.33 · w 0.84 · h 0.06 (high)
• Luggage tag (left)Rectangular hanging luggage tag attached near left handle; smooth finish and shows a small 'BOSS' wordmark near the bottom of the tag.
  1 region

  x 0.20 · y 0.46 · w 0.16 · h 0.20 (high)
• Hanging tag (right)Smaller rectangular hang tag attached near the right handle, hanging down on the front panel with a visible 'BOSS' wordmark centered on the tag.
  1 region

  x 0.57 · y 0.42 · w 0.13 · h 0.20 (high)
• Metal side hardwareSilver-toned metal D-rings and clasp hardware visible at both upper side edges where the shoulder strap connects.
  2 regions

  x 0.01 · y 0.30 · w 0.10 · h 0.22 (high); x 0.89 · y 0.28 · w 0.10 · h 0.26 (high)
• Small vertical zipper detail (left front)Short vertical silver zipper pull and inset pocket detail visible on the left front edge below the horizontal band.
  1 region

  x 0.07 · y 0.46 · w 0.06 · h 0.12 (high)
• Small decorative tab at base cornerTiny multi-striped decorative tab or metal detail visible at the lower right corner of the bag.
  1 region

  x 0.94 · y 0.78 · w 0.04 · h 0.08 (medium)
• Central wordmark“BOSS”
  1 region

  x 0.45 · y 0.30 · w 0.10 · h 0.06 (high)
• Tag wordmark (right tag)“BOSS”
  1 region

  x 0.58 · y 0.50 · w 0.10 · h 0.08 (high)
• Tag wordmark (left luggage tag)“BOSS”
  1 region

  x 0.22 · y 0.58 · w 0.10 · h 0.06 (high)

Other

Studio shot with neutral light gray background, centered product, soft shadow below base, and even frontal lighting.

• Background and stagingUniform light gray studio background with no props; bag centered and occupying the lower two thirds of the frame.
• Shadow and lightingSoft diffuse shadow beneath the bag indicating even frontal lighting with minimal specular highlights on metal hardware.
• Image framingFull front of the bag is visible and unobstructed; shoulder strap extends to image top and is partly cropped by the top edge.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)

Colors

textured black· upper front panel and handles#1C1B1Bsmooth black· lower front panel#0E0E0Epolished silver· metal hardware

02

Product

Right-side and partial front view of a black rectangular briefcase showing textured leather-like exterior, top zipper, twin short handles, a horizontal woven logo band, a metal D-ring on the side, and a detachable woven shoulder strap with metal clip and adjustable buckle.

• Overall shapeSlim rectangular briefcase with rounded vertical corners and a slightly curved top edge visible from a near-side angle.
  1 region

  x 0.30 · y 0.06 · w 0.62 · h 0.88 (high)
• Exterior materialTextured black material with fine diagonal grain visible across exterior panels, giving a saffiano-like finish.
  1 region

  x 0.36 · y 0.12 · w 0.54 · h 0.60 (high)
• Top zipperExposed metal zipper running along the top edge with visible interlocking teeth and a stitched leather zipper tape.
  1 region

  x 0.36 · y 0.04 · w 0.44 · h 0.20 (high)
• HandlesTwo narrow fixed top handles attached with stitched rectangular tabs; only lower portions of handles are visible from this angle.
  1 region

  x 0.52 · y 0.02 · w 0.30 · h 0.26 (high)
• Horizontal woven bandWide horizontal woven band running across the front panel, with raised woven lettering repeating along its length.
  1 region

  x 0.44 · y 0.32 · w 0.46 · h 0.18 (high)
• Side D-ringPolished metal D-ring anchored by a short leather loop positioned on the side seam near the top zipper.
  1 region

  x 0.29 · y 0.33 · w 0.11 · h 0.14 (high)
• Bottom corner detailRounded bottom corner with vertical piping/trim and a small fabric tab stitched into the side seam near the base.
  1 region

  x 0.45 · y 0.69 · w 0.20 · h 0.26 (high)
• Detachable shoulder strapBlack woven strap detached from the D-ring, laid out toward the foreground; strap shows an adjustable metal rectangular slider and a swivel metal clip at the end.
  1 region

  x 0.02 · y 0.68 · w 0.46 · h 0.30 (high)
• Strap adjustable bucklePolished rectangular metal slider used for adjusting strap length, located near the strap midpoint in the foreground.
  1 region

  x 0.06 · y 0.74 · w 0.20 · h 0.14 (high)
• Swivel clipPolished metal swivel clip with a spring gate at strap end, attached to a rectangular metal link.
  1 region

  x 0.18 · y 0.85 · w 0.20 · h 0.13 (high)
• Front band text instance“BOSS”
  1 region

  x 0.52 · y 0.36 · w 0.18 · h 0.12 (high)
• Strap text instance“BOSS”
  1 region

  x 0.06 · y 0.74 · w 0.36 · h 0.18 (high)

Other

Studio-style product shot on a light neutral background with soft shadows; image is a close-up perspective focusing on the bag's side and the detached strap in the foreground.

• Background and lightingUniform light gray background with soft directional lighting from upper left producing gentle shadow beneath the bag and strap.
• Shot compositionAngled close-up framing that crops most of the bag's front and shows the strap arranged toward the lower-left foreground; focus is on texture and hardware detail.
• Image qualityHigh resolution and sharpness with visible fine texture on material and crisp edges on hardware.

Colors

textured black· exterior body#0E0E0Ematte black (woven)· woven horizontal band and shoulder strap#0E0E0Epolished silver· metal hardware (D-ring, buckle, clip)

03

Product

Top-down close crop of a black textured briefcase showing the open main compartment, silver metal zipper teeth, interior black fabric lining with a stitched slip pocket, and a short fabric loop with embossed lettering.

• Exterior material textureMatte black textured leather-like exterior with a fine diagonal crosshatch pattern visible on the outer panels and handles.
  2 regions

  x 0.05 · y 0.45 · w 0.55 · h 0.45 (high); x 0.45 · y 0.05 · w 0.45 · h 0.25 (high)
• Zipper hardwareExposed metal coil zipper with evenly spaced silver teeth running along the top opening; zipper track visible on both sides of the opening.
  1 region

  x 0.12 · y 0.06 · w 0.76 · h 0.22 (high)
• HandlesTwo short top handles in the same textured black material; one handle loop and its stitching visible on the right exterior panel, another handle visible entering frame at upper left.
  2 regions

  x 0.60 · y 0.58 · w 0.36 · h 0.30 (high); x 0.30 · y 0.00 · w 0.36 · h 0.20 (medium)
• Interior lining and pocketBlack smooth fabric lining inside the main compartment with a stitched slip pocket along the inner wall; pocket opening edge visible with single row topstitching.
  1 region

  x 0.24 · y 0.20 · w 0.52 · h 0.42 (high)
• Internal fabric loopShort black woven fabric loop attached above the slip pocket with raised embossed lettering on its face.
  1 region

  x 0.44 · y 0.30 · w 0.12 · h 0.12 (high)
• Embossed loop text“BOSS”
  1 region

  x 0.46 · y 0.32 · w 0.08 · h 0.08 (medium)
• Front exterior panel constructionVisible front panel with a large flat pocket area and edge piping; topstitching follows panel edges and pocket opening.
  1 region

  x 0.48 · y 0.52 · w 0.46 · h 0.42 (high)

Other

Studio product shot, tight top-down detail crop of the bag on a neutral light gray background with soft directional lighting producing subtle highlights on metal and leather surfaces.

• Shot compositionTop-down angled close-up focusing on the open main compartment and front panel; edges of the bag are cropped by the image frame.
• BackgroundUniform light gray background with no visible props or packaging.
• Lighting and reflectionsSoft studio lighting from upper left creating subtle highlights on the metal zipper teeth and faint sheen on the textured exterior.

Colors

matte black· exterior leather panels and handles#0E0D0Dblack fabric· interior lining and slip pocket#0E0D0Cpolished silver· zipper teeth and metal hardware