TIPTOE
90 Cm High Table And Bar Leg
This is a TIPTOE steel table leg for building high tables, bars, or wall-mounted furniture. It features a wider top with clamping screws to secure a tabletop and a tapered narrow bottom, standing 90 cm (35.5 inches) tall. Made from durable commercial-grade steel in Europe, it must be paired with a wall bracket for wall-mounted configurations and cannot support a freestanding tabletop on four legs alone.
- Material
- Steel
- Category
- Furniture > Table Accessories > Table Legs
Size
Specifications
A steel leg for building high tables, bars, or wall-mounted furniture.
Sturdy and durable steel with wider upper extremity for secure table top attachment via clamping screws, narrow bottom for a discreet line, commercial grade, made in Europe, 35.5 inches tall.
- Material
- Steel
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Category
- Furniture > Table Accessories > Table Legs
Additional Attributes
- sturdy and durable steel
- must be combined with the wall bracket
- made entirely in Europe
- commercial grade
- clamping screws
- wider upper extremity
- narrower bottom
- thin discreet line
- 35.5 inches tall
Product Insights
The TIPTOE 90 cm bar leg is a wall-mounted, cantilevered table leg that clamps onto 20–40 mm tabletops without drilling, leaving no permanent marks, and supports up to 70 kg when paired with the required bracket. Its tapered profile, widest at the clamp and narrowing toward the foot, creates a floating effect that emphasizes the tabletop. Designed for commercial durability, the leg is fully recyclable and available in unpolished steel, black, grey, and a warm green-gray finish that coordinates across TIPTOE's modular system for consistent color in mixed-component builds. The main tradeoff is the necessity of a wall bracket and the limitation to wall-mounted setups, with recommendations for two legs on tops up to 180 cm and six legs on longer tops at least 40 mm thick.
Verified claims
- Wall bracket requirement
- The leg must be combined with the TIPTOE wall bracket and supports up to 70 kg in wall-mounted builds.
- Tapered design
- Upper mounting plate widens to clamp while lower two-thirds taper to a thin line.
- Color coordination
- All three finishes are shared across TIPTOE's modular system for consistent color in mixed-component builds.
- Floating effect
- When wall-mounted, the leg's taper makes tabletops appear to float over open floor.
- Load capacity
- Rated to hold 70 kg when paired with the bracket.
- Styling
- Unpolished steel and green-gray color suit industrial and warm interiors.
- Commercial aesthetic
- The unpolished commercial steel finish pairs with raw concrete, subway tile, and stainless steel in industrial spaces.
- Compliance
- Steel complies with EU REACH and EN 10025 standards.
- Sustainability
- Steel can be fully reclaimed at end of life, and the clamp attachment allows clean disassembly for reuse.
- Commercial durability
- Rated for commercial use in public spaces.
- Taper effect
- Wide-to-narrow taper lets table top dominate.
- Mounting
- Wall-mount only with TIPTOE bracket; max 70 kg total; 2 legs ≤180 cm, 6 legs >180 cm (top ≥40 mm).
- Clamping system
- Clamps onto 20–40 mm thick tops without drilling; includes Allen wrench; leaves no marks when disassembled.
- Tabletop pairing
- Clamps 20-40 mm tabletops and supports heavy tops like marble up to 70 kg when wall-mounted.
- Setup recommendations
- Two legs with brackets for tops up to 180 cm; six legs for longer tops (≥40 mm thick).
- Color continuity
- Finish colors match across TIPTOE's legs, brackets, and tabletops.
- Standard finish
- The leg has a deliberately unpolished commercial steel finish.
- Khaki/Sage/Olive finish
- Khaki/Sage/Olive is a muted green-gray finish warmer than standard black.
- Manufacturing origin
- The leg is made entirely in Europe.
- Chemical safety
- European production subjects the steel and finish to REACH limits on harmful substances.
- Batch consistency
- European steel mills operating under EN 10025 standards keep the leg's load-bearing sections and clamping screws consistent unit to unit.
Product record
- Title
- 90 Cm High Table And Bar Leg
- Brand
- TIPTOE
- Price
- 150 CAD
- Availability
- In stock
Buying Guide
1 comparison · 9 sourcesUses
Build a high table with a table top of your choice
These 90 cm steel legs are for building a high table or bar by pairing them with the table top you choose. The wider upper end holds the top securely with clamping screws, and according to the manufacturer the pieces can be built in minutes.[1]
Build your own bar-height table
TIPTOE's steel table and bar leg is designed for DIY projects, including building a bar as well as high tables and wall-mounted pieces. The 90 cm height suits bar-style setups, and the manufacturer says assembly takes just minutes.[1]
Build a wall-mounted piece of furniture
TIPTOE's 90 cm high steel leg is designed for DIY projects like building a wall-mounted table, bar, or piece of furniture. To create a wall-mounted setup, the leg must be combined with the wall BRACKET. Note that this model can't support a table top detached from the wall and mounted on four legs.[1]
Product comparison
Compared within this brand.
| 90 Cm High Table And Bar Leg: Choose this if you want to build a 35.5 inch (90 cm) high table or bar in minutes using a table top of your choice, clamped securely by the leg's top screws. The slim tapered steel leg gives a discreet line to the floor, comes in Black, Grey, or Khaki/Sage/Olive, and is described as sturdy, commercial grade, and made entirely in Europe. Note it must be paired with the wall BRACKET for wall-mounted furniture, and this model cannot support a free-standing table top mounted on four legs without wall attachment.[1,2] | 110 Cm High Table And Bar Leg: Choose this if you want to build a custom high table or bar at a 110 cm (43 inch) height by clamping these sturdy, powder-coated steel legs onto a tabletop of your choice up to 4 cm thick—sold individually for design flexibility, with a setup rated to hold up to 70 kg including the top, and finishes in Graphite Black or Cloud White. Note that this 110 cm model is not suitable as a freestanding four-leg table: for stability and safety it must be paired with the TIPTOE Wall Bracket to create a wall-mounted piece. Avoid brittle tabletop materials such as glass, marble, or stone, don't overtighten the clamp (an overtightened leg can bend outward), and plan for indoor use only.[3,4,5,6,7,8] | 75 Cm Dining Table And Desk Legs Set Of 4: Choose this if you want to build a custom dining table, desk, or console by pairing legs with a top of your choice—the clamp-screw design is easy to install without tools, and the sturdy steel legs stand 29.5 inches (75 cm) tall in a commercial-grade build made entirely in Europe. Each package contains a set of four legs in a sleek tapered design, offered in seven color variants from Graphite Black to Tangerine Red. Note that no tabletop is included, so you will need to supply your own top to complete the piece.[9] |
Image Analysis
1 images- 01
Product
Single slim tapered metal table leg shown full-length, mounted clamp at top with a visible threaded screw and white plastic contact pad, 'TIPTOE' printed vertically on the upper shaft.
- Overall shapeSlim rectangular metal leg tapering from a wider top to a narrower bottom, shown full length and vertically centered in the image.
1 region
x 0.47 · y 0.03 · w 0.07 · h 0.92 (high) - Top clamp assemblyU-shaped clamp at the top consisting of a horizontal upper plate and a vertical inner plate with a visible threaded screw and a round white plastic pressure pad.
1 region
x 0.48 · y 0.03 · w 0.06 · h 0.12 (high) - Printed vertical text“TIPTOE printed vertically on the upper third of the leg, letters in light contrasting color.”
1 region
x 0.48 · y 0.17 · w 0.04 · h 0.12 (high) - Bottom openingSmall square cutout or opening visible at the narrow bottom tip of the leg.
1 region
x 0.48 · y 0.94 · w 0.03 · h 0.04 (high) - Surface finishSmooth dark finish with subtle specular highlights along edges indicating a matte-to-semi-gloss metal surface.
1 region
x 0.47 · y 0.15 · w 0.06 · h 0.70 (medium)
Other
Product photographed against a plain light off-white background, vertically centered with soft shadowing to the left and right; minimal props or distractions.
- Background and compositionPlain off-white background with the leg centered vertically and occupying a narrow central column of the frame.
- Lighting and shadowSoft diffuse lighting with faint symmetrical shadows flanking the leg, suggesting light from above and slight directional bias.
- Image framingFull product visible with small margins at top and bottom; no visible cropping of the leg.
Colors
dark espresso black· leg shaft and clamp#241B13matte white· top pad#F6F3F2dark gunmetal· threaded screw- Overall shapeSlim rectangular metal leg tapering from a wider top to a narrower bottom, shown full length and vertically centered in the image.