TIPTOE
Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long
This wall-mounted shelf unit from Tiptoe is made of powder-coated steel with a folded-sheet construction, offering a compact storage and display solution for small items. It measures 11.7" (30 cm) long, 6" (15 cm) deep, and 8" (20 cm) high. The commercial-grade steel is manufactured in Europe and available in a range of neutral and pastel colors.
- Material
- Powder-coated steel
- Category
- Furniture > Shelving > Wall Shelves & Ledges
Size
Specifications
Folded steel wall-mounted shelf unit with sleek modern lines, available in a range of trendy colors, made in Europe.
Wall-mounted, powder-coated steel, commercial grade, made in Europe, can be combined with different sizes and colors.
- Material
- Powder-coated steel
- Occasion
- everyday
- Condition
- new
- Dimensions
- 11.7x6x8 in
- Category
- Furniture > Shelving > Wall Shelves & Ledges
Additional Attributes
- powder-coated steel
- made in Europe
- commercial grade
- trendy colour palette
- sleek modern lines
- folded sheet
- wall-mounted
- 30 cm length
Product Insights
The Pli Folded Steel Wall-Mounted Shelf Unit 30 cm Long is a 129 CAD wall shelf whose load-bearing rigidity comes from its folded 20 cm sides rather than steel thickness, constructed as one continuous folded steel sheet with no welds or separate bracket, mounting through two holes in the steel itself with included screws and wall plugs. It holds up to 15 kg when properly installed, but on hollow walls the anchor—not the shelf—sets that limit; match the plug to plasterboard, brick or concrete and use a stud for heavier loads. Heavy items should stay centred because the 6-in depth levers front-edge weight outward. The powder coat is solvent-free, so no paint smell when unboxed, but it is thinnest at the sheared cut edges where corrosion starts and chips begin; the coating is thickest on the rounded folds. At 30 cm, the shortest Pli width, it holds paperbacks, A5 notebooks, plants and candles, with folded side panels acting as end-stops. It shares the same 15 cm depth as longer Pli shelves for flush mixed-length runs, though butt-jointing two 30 cm units leaves each folded side upstand visible so a run reads as separate modules; mixing with longer shelves creates intentional asymmetry. It stacks into a bookcase column with 25-40 cm between units, mounting level. All six matte powder-coat finishes—Black through Lemon/Canary Yellow—cost the same 129 CAD, are in stock together, and share the same 30 x 15 x 20 cm frame so mixed-color units sit flush. It ships flatpack in the fewest possible packages, is made entirely in Europe from a single material, assembled and packed with French ESAT centres that employ adults with disabilities, and recycles as one material with no veneer or glue.
Verified claims
- Rigidity
- Load-bearing rigidity comes from the folded 20 cm sides, not the steel's thickness.
- Edge protection
- Powder coat is thinnest at the sheared cut edges, where corrosion starts.
- Mounting
- Mounts through two holes in the folded steel itself, using the supplied screws and wall plugs; there is no separate or concealed bracket, which gives the unit its clean, near-floating look.
- Wall compatibility
- Match the plug to plasterboard, brick or concrete; use a stud for heavier loads.
- Included hardware
- Screws and wall plugs are included in the box.
- Wall anchorage
- On hollow walls the anchor, not the shelf, decides whether the 15 kg rating holds.
- Weight capacity
- Holds up to 15 kg when properly installed; on hollow walls the anchor sets that limit.
- Load placement
- Keep heavy items centred; the 6 in depth levers front-edge weight outward.
- Finish durability
- Powder-coated steel shelf resists daily scratches, but the cut sheet edges chip first.
- Edge durability
- Coating is thickest on the rounded folds; the sheared cut ends are the thin points where chips start.
- Compact size
- At 30 cm, one of the shorter Pli widths, it suits small spaces and holds paperbacks, A5 notebooks, small plants, candles, pictures and other small decor and essentials.
- Retention design
- Folded side panels act as end-stops that keep books and objects from slipping off.
- Modular depth alignment
- Shares the same 15 cm depth as longer Pli shelves, keeping a mixed-length run flush.
- Modular styling
- 30 cm shelf creates intentional asymmetry when mixed with longer shelves.
- Stacking
- Stacks into a bookcase column with 25-40 cm between units; mounts level, not sideways.
- Finish options
- All six matte powder-coat finishes carry the same 129 CAD price and identical 30 cm footprint.
- Seamless jointing
- Butting two 30 cm units leaves each folded side upstand visible, so a run reads as separate modules.
- Colour selection
- All six finishes, Black through Lemon/Canary Yellow, cost the same 129 CAD and are in stock together.
- Recyclability
- A single powder-coated steel sheet with no veneer or glue, so one module recycles as one material.
- Construction
- One continuous folded steel sheet, with no welds or separate bracket.
- Ethical assembly
- Assembled and packed with French ESAT centres that employ adults with disabilities.
- Flatpack shipping
- Designed to ship flatpack in the fewest possible packages.
- Finish pricing
- All six finishes cost the same $129 CAD and are all in stock.
- Color mixing
- Every finish shares the same 30 x 15 x 20 cm frame, so mixed-color units sit flush.
- Production
- Made entirely in Europe from a single material, shipped flatpack and assembled in French ESAT workshops.
- Humidity suitability
- Intended for interior use only; not recommended for humid environments such as bathrooms or kitchens because the powder-coated steel may rust with high humidity or moisture.
- Finish durability
- The powder-coated steel finish is commercial grade and designed for daily use, offering good scratch resistance; sharp impacts or abrasive cleaners can still damage it.
- Cleaning
- Clean with a soft dry cloth, or a damp cloth with mild detergent for marks; avoid abrasive, solvent, and alcohol-based cleaners or disinfectants, which can dull or stain the finish over time.
- Usable depth
- Usable interior depth is close to the full 15 cm — roughly 14 cm of clear depth after the thin folded front lip; standard paperbacks sit comfortably, while a wine bottle lies flat but cannot stand upright under the 20 cm side height.
- Commercial grade
- The 'commercial grade' label on this $129 shelf is a trade descriptor for heavier, more constant use, not a certified or regulated rating; it expresses an intent to be durable rather than a verified measurement.
Product record
- Title
- Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long
- Brand
- TIPTOE
- Price
- 129 CAD
- Availability
- In stock
Buying Guide
1 comparison · 9 sourcesUses
Building a custom wall storage layout
This 30 cm wall-mounted steel shelf is designed to be part of a larger arrangement: the Pli line comes in different sizes, colours, and layouts that can be combined. By mixing configurations, you can create a wall layout that is both practical and suited to your space and needs.[1]
Wall storage that adds style to a living space
This wall-mounted shelf is designed to be put up in a living space where you want both a functional surface and a decorative touch. Per the merchant, its folded powder-coated steel construction is meant to be elegant as well as sturdy, so it can work as part of a room's look while holding everyday items. This is a marketing expectation rather than a reported customer outcome.[1]
Compact display shelf for small corners
This 30 cm folded steel wall shelf works as a compact spot for displaying or keeping small everyday items within reach. In the product's lifestyle scene it is mounted in a kitchen corner above the countertop, holding a few small objects. Its folded steel construction gives it a flat shelf surface on a wall-mounted frame.[1,2,3,4]
Product comparison
Compared within this brand.
| Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long: Choose this if you want a small, wall-mounted accent shelf for displaying compact items: it is a powder-coated folded steel unit measuring 11.7 inches (30 cm) long, 6 inches (15 cm) deep, and 8 inches (20 cm) high at the sides, in a sleek modern style the brand describes as elegant and sturdy and commercial grade. It comes in a range of matte finishes from neutrals to bright pastels (including Black, Ivory/Cream Beige, Mossy Green, Slate Blue, Pink, and Lemon/Canary Yellow), and the line can be combined in different sizes, colours, and layouts to build a custom wall arrangement. Note the shallow 6-inch depth suits small objects rather than larger storage needs, and the easy fit into a wide range of decors is stated as a marketing expectation.[1] | Pli Folded Steel Wall-Mounted Shelf Unit 45 Cm Long: Choose this if you want a compact, wall-mounted accent shelf with sleek, modern lines: it is made from a folded sheet of powder-coated steel, measures 17.75 inches (45 cm) long, 6 inches (15 cm) deep, and 8 inches (20 cm) high on the sides, and Pli units can be combined in different sizes and colours to build a custom wall layout. It is listed as commercial grade, made entirely in Europe, and comes with a 5-year TIPTOE functional warranty. Colour options include Black, Ivory/Cream Beige, Mossy Green, Slate Blue, Pink, and Lemon/Canary Yellow; note the 6-inch depth means it is a shallow shelf suited to narrower storage needs.[5,6] | Pli Folded Steel Wall-Mounted Shelf Unit 60 Cm Long: Choose this if you want the largest shelf in Tiptoe's modular Pli range: at 23.5 inches (60 cm) long, 6 inches deep, and 8 inches in side height, it suits wall storage where the raised sides can also work as bookends. It's made in Europe from powder-coated recycled steel with a simple two-screw mounting system described as easy to install on most wall types, and comes with a 5-year functional warranty covering defects affecting function, including welds and bending. Note that each shelf holds a maximum of 15 kg, and units can be combined in different sizes and colours for a custom wall layout.[7,8,9] |
Image Analysis
3 images- 01
Product
A small wall-mounted folded-steel shelf in a saturated yellow finish, shown front-on in a kitchen corner with three small objects placed on the shelf.
- Shelf geometrySingle horizontal steel shelf panel with two vertical end panels that extend above and below the shelf plane and a flat back panel running between the ends; all visible parts are a uniform yellow-painted folded-steel sheet with 90-degree bends.
1 region
x 0.34 · y 0.14 · w 0.32 · h 0.18 (high) - Visible fastenerSmall circular dark/black screw or mounting cap visible on the right side of the back panel near the shelf plane.
1 region
x 0.64 · y 0.19 · w 0.02 · h 0.03 (high) - Left item - jarSmall clear glass jar with a metal lid containing dark round granules, placed near the left side of the shelf.
1 region
x 0.39 · y 0.20 · w 0.04 · h 0.08 (high) - Center item - grinderTall turned light-wood pepper or salt mill with a metallic top knob, standing on the shelf center.
1 region
x 0.47 · y 0.15 · w 0.06 · h 0.12 (high) - Right item - red objectSmall glossy red apple-shaped object sitting on the right area of the shelf.
1 region
x 0.57 · y 0.20 · w 0.05 · h 0.06 (high)
Other
Kitchen corner lifestyle scene showing the shelf mounted on a pale cream wall above a two-tone backsplash and countertop with kitchen props and utensils.
- Wall and cornerPale cream wall forming a corner at the left edge; shelf mounted on the right panel of the corner.
1 region
x 0.00 · y 0.00 · w 1.00 · h 0.60 (low) - Backsplash and countertopHorizontal terracotta-colored backsplash strip runs along the wall above a light-colored countertop surface in the lower third of the image.
1 region
x 0.00 · y 0.58 · w 1.00 · h 0.28 (high) - Utensils on leftThree stainless-steel kitchen utensils hang from a horizontal rail on the left wall, partly visible and cropped by the image edge.
1 region
x 0.00 · y 0.20 · w 0.22 · h 0.30 (high) - Cutting board and pitcher on countertopVertical wooden cutting board rests against the wall on the countertop to the right of center; in front of it sits a clear glass pitcher with amber liquid and a ridged vertical texture.
1 region
x 0.56 · y 0.64 · w 0.24 · h 0.30 (high) - Lighting and shadowSoft even studio lighting with mild shadows beneath the shelf and objects, no strong directional highlights beyond gentle top-front illumination.
Colors
bright yellow· shelf panels#E5CC3Dblack· mounting fastener- Shelf geometrySingle horizontal steel shelf panel with two vertical end panels that extend above and below the shelf plane and a flat back panel running between the ends; all visible parts are a uniform yellow-painted folded-steel sheet with 90-degree bends.
- 02
Product
Wall-mounted folded steel shelf in a matte yellow finish with two vertical side panels, a flat horizontal shelf, and two visible round mounting holes in the back panel.
- Overall geometrySingle-piece folded sheet forming a rectangular back panel, a flat horizontal shelf extending forward from the lower edge, and two vertical side panels that extend above and below the shelf plane.
1 region
x 0.18 · y 0.28 · w 0.64 · h 0.34 (high) - Side panelsTwo vertical end panels (left and right) are perpendicular to the back panel; each panel extends slightly above the top edge of the back panel and below the shelf plane.
2 regions
x 0.14 · y 0.26 · w 0.12 · h 0.36 (high); x 0.74 · y 0.26 · w 0.12 · h 0.36 (high) - Shelf plane and front lipFlat horizontal shelf panel with a thin front edge that is slightly chamfered or folded downward, producing a visible thin lip along the front.
1 region
x 0.22 · y 0.47 · w 0.56 · h 0.06 (high) - Mounting holesTwo round black mounting holes or screw covers visible in the back panel, arranged roughly horizontally and centered vertically on the back panel.
2 regions
x 0.36 · y 0.41 · w 0.03 · h 0.03 (high); x 0.56 · y 0.41 · w 0.03 · h 0.03 (high) - Material and finishSmooth matte-coated metal surface with consistent color and subtle surface texture visible in highlight and shadow transitions.
- Edge constructionFolded sheet-metal edges visible where the back panel meets the shelf and side panels, showing crisp 90-degree bends.
Other
Product photographed centered on a plain white wall with soft studio lighting that produces a faint shadow below the shelf; image is framed with substantial empty whitespace above and below.
- Background and stagingNeutral white wall background with no visible props or packaging; product mounted on wall.
- Lighting and shadowSoft directional lighting from above-left producing a subtle shadow under the shelf and a gentle highlight on the top surfaces.
- Shot compositionCentered composition with the shelf occupying the middle third of the image and ample empty space above the product.
Colors
lemon yellow· main panels#F4D55Dblack· mounting hole accents- Overall geometrySingle-piece folded sheet forming a rectangular back panel, a flat horizontal shelf extending forward from the lower edge, and two vertical side panels that extend above and below the shelf plane.
- 03
Product
Close-up view of the shelf's folded steel construction showing a vertical mounting plate and a horizontal shelf panel with a folded lip, finished in a uniform matte yellow.
- Vertical mounting plateFlat rectangular vertical steel plate with squared corners and a thin rounded edge visible along the right side; surface appears smooth with a matte finish.
1 region
x 0.12 · y 0.03 · w 0.46 · h 0.84 (high) - Horizontal shelf panelHorizontal steel shelf panel that meets the vertical plate at a tight right-angle fold; top surface is flat and the front edge has a narrow folded lip creating a thin visible border.
1 region
x 0.45 · y 0.33 · w 0.50 · h 0.40 (high) - Underside and inner foldUnderside of the horizontal panel and inner folded junction are visible, showing consistent thickness and the same finish as outer surfaces.
1 region
x 0.55 · y 0.60 · w 0.40 · h 0.30 (high) - Finish and textureUniform matte paint finish with subtle shading from lighting; no visible fasteners, seams, or printed markings on the visible surfaces.
Other
Studio-style product close-up on a neutral white background with soft diffuse lighting and slight shadow under the shelf; image is tightly cropped to show the shelf corner.
- Background and lightingSmooth white background with even, soft lighting producing gentle shadows beneath the shelf and soft highlights on edges.
- Shot compositionTight detail shot focused on the corner where the vertical plate meets the horizontal shelf; portions of the shelf extend out of frame to the right and bottom.
- Image limitationsNo text or labels visible; only a portion of the whole shelf unit is shown.
Colors
matte yellow· main body (vertical plate and horizontal shelf)#DEC04B- Vertical mounting plateFlat rectangular vertical steel plate with squared corners and a thin rounded edge visible along the right side; surface appears smooth with a matte finish.
Variants
6 SKUs| SKU | Title | Price | Avail |
|---|---|---|---|
| 4439683 | Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long - Black - One Size | CA$129.00 | Yes |
| 4439684 | Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long - Ivory/cream Beige - One Size | CA$129.00 | Yes |
| 4439685 | Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long - Mossy Green - One Size | CA$129.00 | Yes |
| 4439686 | Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long - Slate Blue - One Size | CA$129.00 | Yes |
| 4439687 | Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long - Pink - One Size | CA$129.00 | Yes |
| 4439688 | Pli Folded Steel Wall-Mounted Shelf Unit 30 Cm Long - Lemon/canary Yellow - One Size | CA$129.00 | Yes |