
Simons Maison
Braided Polyresin Chair
This chair is a stackable, UV-resistant seating unit made from a braided polyethylene polyresin seat and backrest, supported by a powder-coated iron frame. It is suitable for both indoor and outdoor use, with a maximum weight capacity of 250 lb. Dimensions are 32 inches high, 21 inches wide, and 21 inches deep, and the chair weighs 10 lb.
- Material
- Braided polyresin with powder-coated iron frame
- Category
- Furniture > Chairs > Kitchen & Dining Room Chairs
Specifications
Indoor/outdoor chair with braided polyresin wicker design, iron legs, and stackable storage.
UV-resistant polyethylene braided seat and backrest; powder-coated iron frame; stackable design; maximum weight 250 lb.
- Material
- Braided polyresin with powder-coated iron frame
- Secondary
- metal
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 21 x 21 x 32 in
- Category
- Furniture > Chairs > Kitchen & Dining Room Chairs
Additional Attributes
- braided polyresin
- indoor/outdoor use
- iron legs
- stackable design
- UV-resistant polyethylene braided seat and backrest
- powder-coated iron frame
- maximum weight 250 lb
Product Insights
The Simons Maison Braided Polyresin Chair is a lightweight, stackable dining chair with a UV-stabilized polyethylene braided seat and back that resists fading and retains its warm sand color for 5–10 years in moderate sun, while its powder-coated iron frame offers rust resistance only when the coating remains intact; the main tradeoff is that the frame is prone to scratching from stacking and thin-gauge dents, requiring careful handling, indoor storage during severe weather, and occasional touch-up enamel repairs to prevent corrosion.
Verified claims
- Rust prevention
- Powder coating is the sole rust protection, prone to breach at welds, stacking friction, and thin-gauge dents.
- UV resistance
- UV-stabilized polyethylene with braided construction lasts 5–10 years in moderate sun.
- Color retention
- The Sand color is expected to run through the fiber, as outdoor polyethylene wicker is typically solution-dyed; scratches and sun wear should not reveal a contrasting underlayer.
- Durability
- Powder-coated iron frame resists rust when intact; scratches can lead to corrosion.
- Stacking ease
- Lightweight 10 lb frame and flexible seat allow easy one-person stacking.
- Frame care
- Powder coating resists scratches but erodes over time; felt pads or indoor storage prevent rust.
- Cleaning
- Clean with warm water and mild soap; for stains use a 1:2 bleach solution; avoid pressure washers.
- Frame maintenance
- The powder-coated frame is prone to scratches from stacking and dents, requiring careful handling and rust repair by sanding and touch-up enamel.
- Storage
- Stackable design minimizes wear; cover or store indoors during severe weather to prevent rust.
- Color style
- Warm neutral beige tone that closely resembles natural wicker.
- Assembly
- The chair requires no assembly and is ready to use out of the box.
Product record
- Title
- Braided Polyresin Chair
- Brand
- Simons Maison
- Price
- 198 CAD
- Availability
- In stock
Buying Guide
1 comparison · 8 sourcesUses
Indoor-outdoor dining seating with a body-conforming seat
Simons describes this chair as suited to both indoor and outdoor use, with a seat designed to conform to the body for everyday dining seating. The listed weight capacity is 250 lb.[1]
A dining chair that moves between indoors and outdoors
Designed for both indoor and outdoor use, this Simons Maison chair pairs fine yet rugged iron legs with a UV-resistant polyethylene braided seat and backrest, making it a versatile pick for everyday dining in sun-exposed spaces. When you need the floor space back, it stacks easily for quick storage.[1]
Stacking chairs for quick storage
When you need to clear space, these dining chairs stack easily for quick storage. The UV-resistant design also makes them suitable for everyday use.[1]
Product comparison
Compared within this brand.
| Braided Polyresin Chair: Choose this if you want a wicker-look dining chair for indoor or outdoor use: it has a UV-resistant braided polyethylene seat and backrest on a powder-coated iron frame, and per the merchant it conforms to the body and stacks easily for storage. It comes in a Sand color, measures about 32 inches tall and 21 inches wide and deep, weighs 10 pounds, and supports up to 250 pounds.[1] | Colourfull Polypropylene Chairs Set Of 2: Choose this if you want a set of 2 polypropylene dining chairs that Simons describes as durable, easy to clean, and stackable, with use presented as suitable for both indoor and outdoor decor. The chairs come in Black, Mossy Green, and Ochre Yellow variants, measure 20 inches long by 17 inches deep by 31.5 inches high, and require some assembly. Note that the images show a dark teal finish, which differs from the listed color variants.[2,3,4,5] | Polycarbonate Square Dining Chairs Set Of 4: Choose this if you want a set of four lightweight, stackable dining chairs in a translucent Bronze/Amber finish that works indoors or out. The one-piece molded polycarbonate design has a glossy, see-through look with a square seat, contoured dip, and slightly reclined backrest, and the brand describes it as durable and easy to care for. Each chair measures 46 cm wide by 47 cm deep with a 45 cm seat height and 74 cm total height, so check those dimensions against your table and space.[6,7,8] |
Image Analysis
3 images- 01

Product
A woven tan seat and backrest on a four-leg black metal frame; visible front-right three-quarter view of the chair.
- Seat weaveSeat panel made from tightly braided wicker-like strands forming a woven grid pattern with visible horizontal and vertical weaves; edges are wrapped with the same braided material creating a rounded rim.
1 region
x 0.52 · y 0.48 · w 0.34 · h 0.21 (high) - Backrest weaveSingle-piece backrest formed from the same woven material as the seat, curving gently rearward and rounded at the top with a wrapped braid along the perimeter.
1 region
x 0.56 · y 0.28 · w 0.29 · h 0.30 (high) - Frame and legsFour slender tubular metal legs finished in a dark matte color, each leg slightly angled outward; legs terminate in small round protective caps.
1 region
x 0.64 · y 0.58 · w 0.28 · h 0.36 (high) - Seat-to-frame attachmentWoven seat appears mounted to the metal frame at the underside edge where the braid wraps around the frame, visible as a continuous edge between seat and legs.Partial
1 region
x 0.52 · y 0.52 · w 0.30 · h 0.18 (medium) - Visible wear and textureWoven material shows slight variations in strand thickness and shading producing subtle texture and tonal variation across the seat surface.
1 region
x 0.52 · y 0.40 · w 0.30 · h 0.30 (medium)
Other
Styled interior scene showing the chair beside a round wooden table on a wood floor against a light textured wall; soft directional lighting from the left casts shadows to the right.
- Table edge and propsPartial view of a round light-wood table at left foreground with a single stem flower and an empty wine glass placed on the tabletop.
1 region
x 0.02 · y 0.35 · w 0.48 · h 0.32 (high) - FlooringBrown wood-plank floor visible beneath the chair, showing wood grain and seams between planks.
1 region
x 0.30 · y 0.72 · w 0.60 · h 0.26 (high) - Wall and baseboardPlain light-colored textured wall with a white baseboard running horizontally behind the chair.
1 region
x 0.08 · y 0.18 · w 0.84 · h 0.22 (high) - Lighting and shadowsSoft directional light coming from the left producing clear, soft-edged shadows of the table and chair on the floor and wall to the right.
- Shot compositionThree-quarter front view of the chair placed right of center; image framed to include table props and negative space on the upper wall.
Colors
natural rattan tan· woven seat and back#A29285matte black· metal legs#3D2A1B- Seat weaveSeat panel made from tightly braided wicker-like strands forming a woven grid pattern with visible horizontal and vertical weaves; edges are wrapped with the same braided material creating a rounded rim.
- 02

Product
Rear three-quarter view of a woven chair showing a continuous braided seat and tall curved back made from a light tan resin weave, mounted on slender matte-black metal legs with visible small black foot caps.
- Overall viewRear three-quarter view of a single dining chair showing the back, seat and parts of the legs.
- Back constructionTall, slightly reclined rectangular back panel composed of tight horizontal braided strands forming a uniform weave with a rounded top rim where the braid is wrapped around the frame.
1 region
x 0.52 · y 0.05 · w 0.42 · h 0.62 (high) - Seat constructionJoined woven seat made from the same braided material as the back, with the weave continuing over a rounded front edge and forming a single continuous seat-back shell.
1 region
x 0.20 · y 0.44 · w 0.60 · h 0.20 (high) - Weave detailConsistent tight horizontal pattern of parallel braid strands with slightly darker gaps between rows giving a textured, basketlike appearance.
1 region
x 0.55 · y 0.18 · w 0.33 · h 0.40 (high) - Woven rimRounded tubular rim at the top and front edge where the braid is wrapped to form a thicker border.
2 regions
x 0.52 · y 0.05 · w 0.30 · h 0.08 (medium); x 0.18 · y 0.44 · w 0.20 · h 0.10 (medium) - LegsSlender tubular metal legs with a matte black finish; two rear/side legs visible curving under the seat and extending to the floor.
2 regions
x 0.22 · y 0.55 · w 0.20 · h 0.45 (high); x 0.68 · y 0.60 · w 0.18 · h 0.38 (high) - Leg detailsSmall round black foot caps visible at the ends of the legs where they meet the floor.
2 regions
x 0.30 · y 0.96 · w 0.04 · h 0.03 (medium); x 0.82 · y 0.92 · w 0.03 · h 0.05 (medium)
Other
Indoor staged photo with neutral wall, white baseboard and wood floor; soft directional lighting from the left creates a diagonal shadow on the wall and subtle seat highlights.
- BackgroundOff-white textured wall with a white baseboard visible behind the chair.
1 region
x 0.00 · y 0.00 · w 0.80 · h 0.60 (high) - FlooringWarm medium-tone wood floor with visible grain and plank seams visible beneath the chair.
1 region
x 0.00 · y 0.80 · w 1.00 · h 0.20 (high) - Lighting and shadowSoft directional light from the left casting a diagonal soft shadow on the wall and subtle highlights on the woven surface.
- Shot compositionChair is cropped on the left and bottom edges with the focus on the rear-right portion; image is vertically oriented.
Colors
light tan· woven seat and back#DDD3CBmatte black· metal legs#141312- 03

Product
Close-up of woven seat/back showing braided polyresin weaving and a wrapped rim; a rounded black metal tubular leg/frame is visible under the seat.
- Woven panel weaveTightly spaced horizontal and vertical braided strands forming a woven panel with visible over-under pattern and small gaps between strands; surface shows a smooth, slightly glossy finish and light color variation in individual strands.
1 region
x 0.03 · y 0.03 · w 0.94 · h 0.45 (high) - Wrapped rimRounded rim made from the same braided material wrapped tightly around a structural edge, showing concentric wrap lines and a thicker profile at the chair edge.
2 regions
x 0.55 · y 0.04 · w 0.40 · h 0.25 (high); x 0.48 · y 0.52 · w 0.42 · h 0.28 (high) - Seat underside weaveUnderside or front edge of the woven seat visible with same woven pattern, photographed at an angle causing tighter perspective spacing and highlights on the strands.
1 region
x 0.04 · y 0.50 · w 0.92 · h 0.30 (high) - Metal tubular frameCurved rounded tubular metal leg/frame with a smooth matte dark finish appearing under the seat and supporting the woven rim.
1 region
x 0.28 · y 0.68 · w 0.44 · h 0.30 (high)
Other
Two-panel composite close-up image with a slim horizontal divider; shallow depth of field with selective focus, neutral out-of-focus background, and soft directional lighting producing highlights and gentle shadows.
- Shot compositionImage appears split into two horizontal panels with a narrow white divider band across the middle; top panel shows backrest detail and bottom panel shows seat edge and leg.
1 region
x 0.00 · y 0.46 · w 1.00 · h 0.06 (high) - Depth of fieldShallow depth of field with the woven strands in sharp focus in select areas and gradual blur toward foreground and background.
- Background and lightingNeutral warm-beige background with soft, directional lighting that creates highlights on the woven material and subtle soft shadows under the seat.
Colors
caramel tan· braided weave and wrapped rimmatte black· metal tubular frame/leg#1D1A1A- Woven panel weaveTightly spaced horizontal and vertical braided strands forming a woven panel with visible over-under pattern and small gaps between strands; surface shows a smooth, slightly glossy finish and light color variation in individual strands.
Documents & Data
Customer Reviews
1 total1 reviews · out of 5
perfect
Looks nice. And you don't have to put it together. Will order another