
Yamazaki
Sliding Shelves Cabinet Storage Solution
This is a two-tier cabinet storage unit with sliding shelves, designed to fit under a sink or inside a cabinet. It features a steel frame with a white finish and pull-out trays on metal rails, providing easy access to stored items. It measures 17.75 x 12 x 27 inches (H x W x D) and requires some assembly.
- Material
- Steel frame
- Category
- Furniture > Cabinets & Storage > Storage Cabinets & Lockers
Specifications
Two-shelf storage solution with sliding shelves for under-sink cabinets.
Designed to fit under sink cabinets; sliding shelves keep items handy; steel frame construction.
- Material
- Steel frame
- Condition
- new
- Dimensions
- 27x12x17.75 in
- Category
- Furniture > Cabinets & Storage > Storage Cabinets & Lockers
Additional Attributes
- steel frame
- sliding shelves
- under sink storage
- two-shelf design
- some assembly required
- Yamazaki
Product Insights
The Yamazaki Sliding Shelves Cabinet Storage Solution is a fixed 12 in side-lane under-sink organizer, not an expandable 11-20 in unit: a 27 in deep, 17.75 in tall powder-coated steel cabinet insert whose upper shelf locks into four heights about 2 in apart and whose lower tray is fixed, with capacity rated at 11 lb upper and 22 lb lower and raised basket sides to keep bottles and jars corralled as trays slide. Its core promise is a rigid steel build that resists water and rust under the sink, slides better and is sturdier than generic Amazon under-sink organizers, assembles in about 20 minutes with a basic screwdriver, and is designed in Japan while manufactured in China, so the 183 CAD price buys the design rather than Japanese fabrication; it is out of stock. The tradeoff is precise installation, care limits, and non-removable trays: at 27 in deep it needs more floor depth than the 22-23 in standard sink base leaves, so it fits beside a rear-wall trap only with a clear side lane, cannot use the 8-10 in directly under the trap, needs 2-3 in beside the drain for trap cleanout, needs about 30 in front clearance and a door swing clear of shelf travel, and can be blocked by an inward-swinging door, face-frame rail, garbage disposal plumbing pushed 6-8 in into the base, or any trap, valves, or supply lines in the 27 in slide run; it is also too long for an 18-21 in bathroom vanity. Each shelf has a stopper so it cannot roll out completely, making trays non-removable and cleaned in place, weight must be spread evenly because front-edge loading strains the pull lip, bleach, drain cleaners, lime-scale removers, and high-pH cleaners attack the powder coat unless wiped or rinsed off promptly, finish care requires a soft damp cloth and prompt drying to avoid watermarks, and the printed instructions ship in Japanese, requiring a translation app.
Verified claims
- Depth clearance
- At 27 in deep, it needs more floor depth than the 22-23 in a standard sink base leaves
- Trap clearance
- Fits beside a rear-wall trap; a garbage disposal pushes plumbing 6-8 in into the base
- Slide clearance
- An inward-swinging door, a face-frame rail, or plumbing in the run can block the trays as they slide out
- Width fit
- At 12 in wide it fits the side zone beside a trap with room to spare
- Height clearance
- At 17.75 in tall it cannot fit the 8-10 in directly under the trap, so it needs a clear side lane
- Trap access
- Leave 2-3 in of clearance beside the drain so the trap cleanout stays reachable
- Uninterrupted floor
- The 27 in slide run must stay clear of the trap, valves and supply lines
- Vanity fit
- 27 in deep, so too long for a bathroom vanity that runs only 18-21 in
- Shelf stops
- Each shelf has a stopper so it cannot roll out completely; the trays are not removable.
- Front clearance
- Needs about 30 in of front clearance and a door swing clear of the shelves' forward travel
- Cleaning access
- Trays stop from rolling out fully, so they are wiped clean in place rather than removed
- Capacity
- Top shelf rated 11 lb, lower tray 22 lb; heavy jugs go on the bottom.
- Load distribution
- Spread weight evenly across each tray; front-edge weight strains the pull lip.
- Frame rigidity
- Solid steel frame, not a thin wire build, shows little flex under a loaded tray.
- Shelf height
- Upper shelf locks into four positions about 2 in (5 cm) apart; the lower tray is fixed.
- Chemical resistance
- Bleach, drain cleaners and lime-scale removers attack the powder coat unless wiped off promptly
- Rust resistance
- Powder-coated steel frame and shelves resist water and rust under the sink
- Finish care
- Wipe clean with a soft damp cloth and dry promptly to avoid watermarks
- Assembly
- About a 20-minute build with a basic screwdriver; a helper eases screw-hole alignment
- Instructions
- Printed instructions ship in Japanese, so plan on a translation app
- Shelf heights
- The upper shelf locks into four heights 2 in apart; the lower shelf is fixed
- Design lineage
- Yamazaki started with kimono sewing tables and built its name on steel ironing boards
- Origin
- Designed in Japan and manufactured in China; the price buys the design, not Japanese fabrication
- Build quality
- Buyers report it is sturdier and slides better than generic Amazon under-sink organizers
- Adjustable shelf
- The upper shelf adjusts to four heights about 2 in apart while the bottom shelf is fixed
- Positioning
- A fixed 12 in side-lane column, not an 11-20 in expandable unit
- Placement
- A kitchen-base organizer: at 27 in deep it outruns the 18-21 in cabinet of a bathroom vanity
- Cleaner compatibility
- Bleach and high-pH cleaners attack the coating if left to dwell; rinse promptly.
- Containment
- Raised basket sides keep bottles and jars corralled as the tray slides out
Product record
- Title
- Sliding Shelves Cabinet Storage Solution
- Brand
- Yamazaki
- Price
- 183 CAD
- Availability
- Out of stock
Buying Guide
1 comparison · 6 sourcesUses
Pull-out under-sink cabinet storage
Designed to fit inside the cabinet under your sink, this two-tier shelving unit helps organize cleaning bottles, tins, and baskets in a tight space. The trays slide out on metal rails from a white metal frame mounted to the cabinet base, so items in the back are easier to reach.[1,2]
Pull-out shelves for reaching items at the back of a cabinet
This two-tier sliding shelf unit sits inside a cabinet, with shallow white trays that slide out on metal rails so bottles, jars, tins, and boxes come toward you instead of being buried at the back. The trays are shown pulled forward with a hand reaching in to grab a jar, making it easy to keep everyday items handy. The unit is described by the merchant as great for keeping everything within easy reach.[1,2,3]
Pull-out cabinet shelves for bottles, tins, and jars
Install this two-tier sliding shelf unit inside a cabinet to organize bottles, tins, jars, and boxes so items slide out toward you instead of getting lost at the back. The trays have a raised front lip to keep contents in place, and the lower tray pulls fully forward on metal rails for easy reaching. As shown, the trays can hold everything from tall plastic bottles to round metal tins.[2,3]
Product comparison
Compared within this brand.
| Sliding Shelves Cabinet Storage Solution: Choose this if you want to organize the cabinet under your sink, since its two shallow white trays slide out on metal rails to keep everything handy. The steel-framed unit measures 17.75 inches (45 cm) high, 12 inches (30.5 cm) wide, and 27 inches (68.5 cm) deep in a single size, and comes only in white. Note that some assembly is required, and as an online-only item it ships from the supplier separately from regular Simons orders and may arrive in different packaging within a different time frame.[1,2] | Sliding Slim Storage Solution: Choose this if you need a slim freestanding unit for a tight bathroom spot: it stands just 5.5 inches wide, 21.5 inches tall, and 22 inches deep, with a two-tier sliding drawer and a wooden top for organizing toiletries. It is built from steel and wood, and is offered in Black or White, each in one size.[4] | Drawer And Shelf Storage Solution: Choose this if you want to reclaim countertop space taken up by kitchen appliances: it combines a drawer, a pull-out shelf, and an appliance stand in one compact steel unit (5.25 inches high by 17.75 inches wide by 15.5 inches deep) with a matte black finish. The cabinet and shelf can be flipped so the pull-out shelf sits either under or above the drawer, and it is stated to be a winner of Good Housekeeping's Kitchen Awards 2026 per the brand's page. Note that some assembly is required and it comes in a single one-size black variant.[5,6] |
Image Analysis
3 images- 01

Product
A two-tier white metal sliding shelf unit installed inside a cabinet; lower drawer tray is pulled out on metal side rails and the upper shelf holds bottles and a wire basket.
- Overall structureTwo-level rectangular metal frame with vertical corner posts and horizontal supports forming an upper shelf and a lower sliding tray; frame is installed inside a cabinet and aligned front-to-back.
1 region
x 0.22 · y 0.20 · w 0.56 · h 0.66 (high) - Lower sliding trayFlat rectangular plastic tray on metal side rails that is pulled forward from the cabinet; tray has a shallow lip around the perimeter.
1 region
x 0.19 · y 0.62 · w 0.60 · h 0.20 (high) - Upper shelfRaised rectangular shelf sitting within the frame with open sides; contains a small wire basket and tall bottles.
1 region
x 0.28 · y 0.33 · w 0.44 · h 0.28 (high) - Frame material and finishSlim metal posts and rails with a smooth painted white finish on visible surfaces.
1 region
x 0.30 · y 0.30 · w 0.40 · h 0.55 (high) - Sliding railsPolished metal sliding rails visible at the lower tray edges; rails run front-to-back and are mounted to the tray.
2 regions
x 0.18 · y 0.62 · w 0.22 · h 0.12 (high); x 0.66 · y 0.62 · w 0.12 · h 0.12 (medium) - Wire basketSmall rectangular wire basket with vertical and horizontal thin metal wires, placed on the upper shelf.
1 region
x 0.36 · y 0.42 · w 0.18 · h 0.12 (high) - Bottles on upper shelfSeveral bottles and containers of different heights placed on the upper shelf, including a tall bottle with a black cap at the rear.
1 region
x 0.52 · y 0.32 · w 0.19 · h 0.23 (high) - Visible printed label 'ecostore'“ecostore”
1 region
x 0.53 · y 0.45 · w 0.08 · h 0.12 (high)
Other
Interior of a white cabinet with the sink basin underside visible at top right; a small plant pot and a metal container sit on the cabinet shelf above. Soft even studio lighting with mild shadows and a light colored floor surface.
- Cabinet interior and sinkWhite cabinet interior with the underside of a sink basin visible at the top right of the image.
1 region
x 0.66 · y 0.08 · w 0.28 · h 0.20 (high) - Plant and container on top shelfSmall textured round plant pot with a green succulent and a reflective silver container placed on the cabinet shelf above the product.
2 regions
x 0.37 · y 0.02 · w 0.20 · h 0.14 (high); x 0.58 · y 0.03 · w 0.10 · h 0.10 (high) - Jar label text“CLAYD”
1 region
x 0.88 · y 0.63 · w 0.08 · h 0.18 (medium) - Dermatology box text“DERMATOLOGIST TESTED”
1 region
x 0.45 · y 0.62 · w 0.18 · h 0.12 (high) - Small sachet text“Stain”
1 region
x 0.38 · y 0.71 · w 0.08 · h 0.09 (high) - Shot compositionFront-facing view of an open cabinet with the product centered and the left cabinet door visible and opened; image cropped close to the cabinet interior.
- Lighting and shadowsSoft, diffuse studio lighting resulting in gentle shadows beneath shelves and objects; no harsh highlights except on the reflective metal container.
Colors
matte white· metal frame#EDEEF1soft white plastic· lower tray#F1F1F4polished chrome· sliding rails and wire basket#E1E1DE- Overall structureTwo-level rectangular metal frame with vertical corner posts and horizontal supports forming an upper shelf and a lower sliding tray; frame is installed inside a cabinet and aligned front-to-back.
- 02

Product
A white metal framed two-tier pull-out shelving unit installed inside a cabinet; two shallow rectangular white trays slide out on metal rails and are shown loaded with bottles and tins. A human hand is placing a plastic bottle on the lower tray.
- Overall structureWhite vertical metal frame with two horizontal slide-mounted trays installed inside a cabinet opening; frame attaches to cabinet base and supports trays on metal slide rails.
1 region
x 0.48 · y 0.08 · w 0.44 · h 0.84 (medium) - Lower sliding trayRectangular white shallow tray with a raised front lip and smooth flat base; tray is fully extended and holds multiple bottles.
1 region
x 0.12 · y 0.48 · w 0.76 · h 0.36 (high) - Upper sliding traySmaller white shallow tray with raised front lip mounted above the lower tray; it is partially extended and contains two round metal tins.
1 region
x 0.56 · y 0.12 · w 0.36 · h 0.18 (high) - Slide rails and hardwareExposed metal slide rails run along the right side of the trays; visible screw fasteners secure the vertical frame to the cabinet base and the slide assembly.
1 region
x 0.78 · y 0.22 · w 0.14 · h 0.66 (medium) - Cabinet hingeSilver metal European-style cabinet hinge mounted on the inner left cabinet door panel, visible when door is open.
1 region
x 0.20 · y 0.10 · w 0.16 · h 0.14 (high) - Hand interactionLeft hand with wrist and forearm visible placing or lifting a tall clear plastic bottle onto the lower tray; fingers grasp bottle near the cap.
1 region
x 0.18 · y 0.30 · w 0.38 · h 0.28 (high) - Contents presentVarious consumer bottles and a dark rectangular bottle sit on the lower tray; two round metal tins are on the upper tray, indicating trays are shown loaded for demonstration.
2 regions
x 0.22 · y 0.50 · w 0.48 · h 0.32 (high); x 0.60 · y 0.14 · w 0.28 · h 0.14 (high)
Other
Studio-lit product shot inside an open cabinet with soft even lighting and minimal shadows; neutral light-gray floor surface visible below cabinet. Image is portrait oriented and crops cabinet top and parts of the extended tray area.
- Shot compositionPortrait-oriented close-up centered on the cabinet interior and extended trays; framing includes part of the cabinet door at left and a small portion of the cabinet base at bottom.
- Lighting and shadowsEven diffuse lighting with soft shadows under the extended tray and subtle highlights on plastic bottles and metal tins.
- Image croppingTop edge of cabinet interior is visible but the very top of the cabinet is cropped out; right side shows full depth of frame while left side shows inner face of cabinet door.
- Image qualitySharp focus on trays, hardware, and bottles; minimal noise and neutral color balance.
Colors
matte white· trays and framebrushed silver· metal hardware and slide rails#B2B4AC- Overall structureWhite vertical metal frame with two horizontal slide-mounted trays installed inside a cabinet opening; frame attaches to cabinet base and supports trays on metal slide rails.
- 03

Product
A shallow white sliding tray mounted on metal inner rails inside a cabinet, shown pulled partway out and holding tins, jars, and boxes; visible metal hinge and vertical support frame at the cabinet side.
- Tray geometryShallow rectangular sliding tray with a flat base and short vertical side walls; tray front has an integrated rectangular cutout handle at the left corner.
1 region
x 0.04 · y 0.23 · w 0.66 · h 0.38 (high) - Tray finishSmooth matte white finish on tray and side walls, consistent across visible surfaces.
1 region
x 0.04 · y 0.23 · w 0.66 · h 0.38 (high) - Slide railNarrow horizontal metal slide rail visible along the right outer edge of the tray with a polished metallic finish.
1 region
x 0.64 · y 0.33 · w 0.26 · h 0.10 (high) - Cabinet hingeConcealed-style metal hinge visible on the rear inner cabinet wall near the top-left of the image, attached with visible screws.
1 region
x 0.38 · y 0.09 · w 0.18 · h 0.12 (high) - Vertical support frameWhite vertical metal support frame at the right side of the tray with a rectangular profile and a visible rail that supports a lower shelf.
1 region
x 0.75 · y 0.34 · w 0.20 · h 0.49 (high) - Round metal tinsThree circular metal tins with silver lids arranged along the left and front areas of the tray; lids have a dull metallic finish.
2 regions
x 0.07 · y 0.34 · w 0.28 · h 0.23 (high); x 0.27 · y 0.46 · w 0.18 · h 0.18 (high) - Small glass jarsTwo small clear glass jars with white plastic lids near the back-left of the tray; one jar is being grasped by a hand.
1 region
x 0.39 · y 0.20 · w 0.18 · h 0.18 (high) - Decorative rectangular tinTall rectangular tin with a blue decorated lid and pale blue sides with printed ornamentation, positioned at the right-rear corner of the tray.
1 region
x 0.57 · y 0.30 · w 0.19 · h 0.26 (high) - Lower shelf contents visiblePortion of a lower shelf is visible beneath the tray holding tall bottles, including a clear bottle with yellow liquid and a dark label.
1 region
x 0.72 · y 0.62 · w 0.20 · h 0.30 (high)
Packaging
Several packaged food containers are visible on the tray, including brown rectangular boxes labeled with legible text and a decorative tin box.
- Coffee box text“Coffee”
1 region
x 0.74 · y 0.21 · w 0.18 · h 0.18 (high) - Blue tin panel textDecorative printed panel, small text not legible at this resolutionPartial
1 region
x 0.57 · y 0.30 · w 0.19 · h 0.26 (medium) - Small jar label textBlock of label text on jar, characters small and partially legible but not fully readablePartial
1 region
x 0.40 · y 0.20 · w 0.12 · h 0.12 (medium) - Round tin label textRound tin with handwritten-style label, small and partly obscured by reflectionPartial
1 region
x 0.18 · y 0.38 · w 0.20 · h 0.26 (medium)
Other
Image shows a close-up interior cabinet shot with a hand reaching to pick up a jar; soft diffuse lighting and neutral background with slight shadowing under the tray.
- Hand interactingA left hand enters the frame from the left, grasping the lid of a small jar near the back of the tray.
1 region
x 0.22 · y 0.14 · w 0.36 · h 0.24 (high) - Shot compositionThree-quarter top-down close-up of tray interior, cropped at cabinet edges showing part of the lower shelf and right-side support.
- Lighting and shadowSoft diffuse lighting from above-left producing subtle shadows beneath tins and along the tray edges.
- Image qualityHigh resolution with clear focus on tray contents; slight reflective glare visible on metal lids.
Colors
matte white· tray and side wallspolished chrome· slide rail#6CB1D3light kraft brown· coffee boxesPackaging#D3C1AEsky blue· decorative rectangular tin lidPackaging#72B1D4dull silver· round tin lidsPackaging#9C9D92golden yellow· bottle liquidPackaging- Tray geometryShallow rectangular sliding tray with a flat base and short vertical side walls; tray front has an integrated rectangular cutout handle at the left corner.