
Nardi
Net Outdoor Side Table
The Net Outdoor Side Table is a small, square table intended for outdoor use. It is constructed from a commercial-grade, UV-resistant resin and fiberglass blend, features a perforated top and non-skid legs, and measures 15.5 inches (39.5 cm) on all sides. It serves as a stable surface for placing drinks or small items next to outdoor seating, and is made in Italy.
- Color
- neutral tone
- Material
- Commercial-grade UV-resistant resin and fibreglass blend
- Category
- Furniture > Outdoor Furniture > Outdoor Tables
Color
Size
Specifications
Small minimalist outdoor side table with UV-resistant resin and fibreglass, non-skid legs, and modern matte finish.
Commercial-grade UV-resistant resin and fibreglass blend; non-skid legs; matte finish; made in Italy.
- Color
- neutral tone · gray
- Material
- Commercial-grade UV-resistant resin and fibreglass blend
- Occasion
- everyday, vacation
- Condition
- new
- Dimensions
- 15.5x15.5x15.5 in
- Category
- Furniture > Outdoor Furniture > Outdoor Tables
Additional Attributes
- UV-resistant
- commercial-grade
- non-skid legs
- made in Italy
- matte finish
- small
- minimalist
- neutral tone
- square top
- fibreglass blend
Product Insights
The Nardi Net Outdoor Side Table is a lightweight, stackable companion to the Net collection, made from fiberglass-reinforced mass-colored resin that resists fading, scratching, and warping while being fully recyclable. Its perforated surface drains rain and matches the chair design, with non-slip feet for stability. The tradeoff: it requires cleaning with mild soap only, avoiding bleach and ammonia, and should be stored indoors when not in use; its 39.5 cm height positions it 2.5 cm below the Net Lounge seat for ergonomic pairing.
Verified claims
- Mass coloring
- The resin is uniformly pigmented and UV-stabilized, so it resists fading, and scratches or scuffs reveal the same color rather than white stress marks.
- Recyclability
- Virgin-grade polypropylene resin is fully recyclable, and integral color avoids coating removal.
- Warp resistance
- Fiberglass reinforcement and monoblock construction prevent sagging under heat or weight.
- Impact toughness
- Weighs only 1.7 kg and withstands bumps without cracking.
- Color retention
- Mass-colored resin with UV stabilizers resists fading and hides scuffs.
- Chemical resistance
- Polypropylene resists chlorine, salt, and acids; clean with mild soap; avoid bleach and ammonia.
- Resin quality
- Fiberglass-reinforced virgin-grade polypropylene resin with no recycled fillers.
- Perforated surface
- Identical square dot pattern and rectangular border as Net chairs; perforations drain water.
- Table height
- 39.5 cm table height sits 2.5 cm below Net Lounge chair's 42 cm seat.
- Stackability
- Nests with Net chairs and stools for compact stackable storage.
- Height pairing
- Tabletop at 39.5 cm is 2.5 cm below Net Lounge seat height for ergonomic pairing.
- Stability
- Non-slip feet provide good grip on concrete and wooden deck surfaces, helping keep the table stable.
- Cleaning
- Only neutral detergents are safe; avoid bleach and ammonia to protect the matte finish.
- Storage
- Cover or store indoors when not in use; the table is stackable for compact storage.
- Weather resistance
- UV-stabilized resin and perforated top withstand sun, frost, and chemical exposure.
- Drainage
- Grid holes drain rain instantly, preventing pooling and freeze-thaw cracks.
- Color durability
- Resin color runs through, so scratches don't expose a different base.
- Design match
- Perforation pattern matches Net collection chairs.
- Debris maintenance
- Rain drains through the perforated top, but small debris like leaves or dirt can collect in the openings; a quick rinse with water clears them.
- Scratch resistance
- The matte finish is durable for daily outdoor use but can show scratches over time; the UV-stabilised fibreglass polypropylene resists fading and is commercial-grade.
Product record
- Title
- Net Outdoor Side Table
- Brand
- Nardi
- Price
- 129 CAD
- Availability
- In stock
Image Analysis
2 images- 01

Product
Square outdoor side table with a perforated grid top, rounded corners, and four integrated legs in a coral-red matte finish. A small stemmed glass sits on the tabletop.
- Top surfaceSquare tabletop with rounded corners and a uniform square perforation grid across the entire surface; perforations are evenly spaced and create a lattice pattern.
1 region
x 0.05 · y 0.08 · w 0.62 · h 0.42 (high) - Leg constructionFour straight legs integrated into the table top with slightly rounded outer edges where they meet the tabletop; legs are hollow-appearing and share the same coral-red finish as the top.
1 region
x 0.18 · y 0.40 · w 0.43 · h 0.52 (high) - Surface finishMatte or low-sheen solid-colored finish across top and legs without visible texture other than the perforations.
- On-table objectSingle small stemmed glass with a short stem and rounded bowl placed near the center of the tabletop; glass casts a faint patterned shadow onto the perforated surface.
1 region
x 0.33 · y 0.22 · w 0.10 · h 0.16 (high) - Visible occlusionRight-front corner of the table is partially occluded by the arm and seat of a matching coral-red chair and by a green-and-white striped towel draped over the chair.
1 region
x 0.59 · y 0.34 · w 0.36 · h 0.46 (high)
Other
Lifestyle shot showing the table in a staged interior with a potted plant behind it, a checkered marble-and-white tiled floor, and soft directional lighting from upper left creating patterned shadows.
- Background plantPotted leafy plant with thin brown trunk located behind the table, pot rim visible above the rear edge of the tabletop.
1 region
x 0.22 · y 0.00 · w 0.32 · h 0.30 (high) - Floor patternCheckerboard floor of alternating dark brown marble and off-white tiles visible beneath and around the table.
1 region
x 0.00 · y 0.42 · w 0.98 · h 0.56 (high) - Prop chair and towelPartial view of a coral-red chair arm and perforated seat at the right edge of the image with a draped green-and-white striped towel.
1 region
x 0.62 · y 0.28 · w 0.36 · h 0.56 (high) - Lighting and shadowSoft directional lighting from the upper left creates a patterned shadow of the tabletop perforations on the floor and on the table legs.
- Shot compositionAngled overhead three-quarter view focusing on the tabletop and upper leg area, with the camera positioned slightly left of center and above the product.
Colors
coral red· table top and legs#CA4C44- Top surfaceSquare tabletop with rounded corners and a uniform square perforation grid across the entire surface; perforations are evenly spaced and create a lattice pattern.
- 02

Product
Close-up of a red metal or plastic outdoor side table top with a uniform square perforation pattern, rounded outer corner, and an integrated straight leg visible at the near corner.
- Perforated top patternFlat tabletop surface with a regular grid of square holes punched through, aligned in rows and columns across the visible surface.
1 region
x 0.02 · y 0.02 · w 0.78 · h 0.48 (high) - Rounded cornerTabletop corner visible at upper right has a smoothly rounded radius connecting the top surface to the outer vertical skirt.
1 region
x 0.58 · y 0.02 · w 0.40 · h 0.20 (high) - Integrated vertical legSingle straight leg formed as a continuous piece with the tabletop skirt, with a rectangular outer face and a subtle inward curve at the top where it meets the skirt.
1 region
x 0.62 · y 0.32 · w 0.36 · h 0.66 (high) - Material finishOpaque matte painted finish on tabletop and leg with slight specular highlights on raised edges and a uniformly smooth surface texture.
- Edge skirtOuter skirt along the tabletop edge is continuous and flush with the perforated top surface, forming a shallow vertical rim around the holes.
1 region
x 0.12 · y 0.18 · w 0.68 · h 0.34 (medium)
Other
Staged close-up shot showing the table on a checkered tile floor with directional lighting that casts the perforation pattern's shadow onto the tiles.
- Shot compositionTight angled overhead-to-side closeup framing focusing on the tabletop corner and adjacent leg; table fills most of the frame and is cropped at the lower right and upper left edges.
- Background surfaceFloor with alternating light and dark square tiles visible beneath the table, forming a subtle checkerboard pattern.
1 region
x 0.18 · y 0.56 · w 0.64 · h 0.42 (high) - Perforation shadowDistinct shadow of the tabletop's square perforations projected onto the floor, creating a secondary grid of darker squares on the tiles.
1 region
x 0.18 · y 0.56 · w 0.60 · h 0.32 (high) - LightingDirectional soft light from upper-left producing gentle highlights along the tabletop edges and leg, and moderate contrast in the perforation shadows.
Colors
matte coral red· tabletop and leg#E44B43- Perforated top patternFlat tabletop surface with a regular grid of square holes punched through, aligned in rows and columns across the visible surface.