Island Faux-Wood Outdoor Chairs Set Of 2

Lightweight faux-wood outdoor chairs with powder-coated aluminum frame, suitable for indoor and outdoor use.

Lightweight, easy to move, sleek design, faux-wood seat and backrest, powder-coated aluminum frame, commercial grade.

Material

Aluminum, faux wood

Occasion

casual, everyday

Age Group

adult

Condition

new

Dimensions

23.5x25x31.5 in

Category

Furniture > Outdoor Furniture > Outdoor Seating > Outdoor Chairs

01

Product

Single outdoor chair shown from a front-right three quarter angle. Tubular frame with integrated armrests and a slatted faux-wood seat and back.

• Overall poseChair shown alone at a slight right-facing angle, revealing front, right side and part of the rear leg; seat and back are visible.
  1 region

  x 0.14 · y 0.13 · w 0.72 · h 0.74 (high)
• Frame material and shapeRounded tubular frame forming legs and armrests in a continuous bent profile; tubes are smooth with a matte finish.
  1 region

  x 0.18 · y 0.32 · w 0.58 · h 0.56 (high)
• Armrest designArmrests are formed from the same rounded tube as the legs, curving forward then down to meet the front legs; ends are slightly rounded.
  1 region

  x 0.22 · y 0.28 · w 0.52 · h 0.30 (high)
• Seat constructionFlat seat composed of parallel horizontal slats with visible narrow gaps between them; slats extend to the front edge of the seat.
  1 region

  x 0.34 · y 0.46 · w 0.39 · h 0.18 (high)
• Backrest constructionBackrest formed from multiple horizontal slats matching the seat, mounted between two vertical uprights; slats have a subtle wood-grain texture.
  1 region

  x 0.42 · y 0.20 · w 0.30 · h 0.28 (high)
• LegsFour straight cylindrical legs continuing from the tubular frame; right-front leg is fully visible and right-rear leg is visible behind the seat.
  1 region

  x 0.20 · y 0.60 · w 0.54 · h 0.36 (high)
• FinishUniform dark charcoal coloration across frame and slats with a matte appearance; slats show a faint horizontal grain pattern.

Other

White studio background with a soft diffuse shadow cast to the right and slightly behind the chair; image crop leaves space above the chair.

• Background and shadowNeutral white background and floor with a single soft shadow of the chair cast to the right and slightly rearward.
  1 region

  x 0.44 · y 0.64 · w 0.46 · h 0.28 (high)
• Shot compositionStudio product shot centered in frame with even lighting and minimal reflections; chair is fully visible and unobstructed.

Colors

dark charcoal gray· tubular frame and armrests#4B4A45charcoal wood-grain gray· seat and back slats#6A6A65

02

Product

Rear three-quarter view of a single outdoor chair showing a tubular metal frame with integrated armrests and a slatted faux-wood back and seat attached with visible fasteners.

• View and orientationChair shown from rear-right three-quarter angle revealing the backrest, seat, right armrest and both rear and front legs.
  1 region

  x 0.20 · y 0.16 · w 0.60 · h 0.66 (high)
• Backrest slatsBackrest composed of horizontal flat slats with narrow gaps between them; slat faces show a subtle linear woodgrain texture.
  1 region

  x 0.18 · y 0.18 · w 0.40 · h 0.44 (high)
• Fasteners along backA vertical row of small round fasteners is visible along the left and right edges of the backrest where slats meet the frame.
  2 regions

  x 0.18 · y 0.18 · w 0.06 · h 0.44 (high); x 0.46 · y 0.18 · w 0.04 · h 0.44 (high)
• Seat slatsSeat consists of matching horizontal slats aligned with the backrest slats, mounted to the frame with a small visible gap at the rear between seat and back.
  1 region

  x 0.30 · y 0.44 · w 0.40 · h 0.20 (high)
• Tubular frame and armrestFrame is made from rounded tubular members forming continuous armrest-to-leg pieces; the right armrest is a straight horizontal tube with rounded corners.
  1 region

  x 0.44 · y 0.30 · w 0.44 · h 0.28 (high)
• Leg geometryFront and rear legs are slightly splayed; front right leg visible in foreground, rear left leg visible through the gap under the seat.
  2 regions

  x 0.58 · y 0.52 · w 0.22 · h 0.42 (high); x 0.18 · y 0.58 · w 0.18 · h 0.32 (medium)
• Material finishFrame appears matte and smooth; slats have a low-sheen textured finish resembling faux wood grain.
• Visible joinsRounded welded or mitered joints where tubular armrest meets vertical supports are visible at the chair corners.
  1 region

  x 0.44 · y 0.28 · w 0.16 · h 0.18 (medium)

Other

Studio-style product shot on a white background with soft shadow on the floor to the left of the chair; image is well lit and centered lower half of frame.

• Background and shadowPlain white background with a soft hard-edged shadow cast to the lower-left of the chair indicating a single directional light source.
  1 region

  x 0.00 · y 0.68 · w 0.60 · h 0.24 (high)
• Shot compositionChair is centered horizontally and positioned in the lower half of the image with generous white space above.
• Image qualitySharp focus on the chair with even studio lighting and no visible noise or motion blur.

Colors

dark charcoal gray· tubular frame and armrests#3E3D39medium gray faux-wood· backrest and seat slats#6E6D69

03

Product

Rear view of a single outdoor chair with horizontal faux-wood slatted back, tubular legs and curved armrests in a dark charcoal finish; visible metal fastener heads along the back supports.

• Back slatted panelRectangular back composed of multiple horizontal faux-wood slats with a textured wood-grain appearance and even gaps between slats; slats mounted between two vertical supports.
  1 region

  x 0.22 · y 0.18 · w 0.56 · h 0.34 (high)
• Vertical support fastenersRows of visible round metal fastener heads aligned vertically along both left and right outer edges of the back panel, evenly spaced.
  2 regions

  x 0.21 · y 0.18 · w 0.06 · h 0.34 (high); x 0.73 · y 0.18 · w 0.06 · h 0.34 (high)
• Tubular rear legsTwo straight tubular rear legs extending down from the seat to the floor, with a smooth, matte finish and circular leg ends touching the surface.
  2 regions

  x 0.37 · y 0.48 · w 0.11 · h 0.42 (high); x 0.52 · y 0.48 · w 0.11 · h 0.42 (high)
• Curved armrestsArmrests curve upward and inward from the rear supports, forming a rounded top profile with a continuous tubular look matching the frame finish.
  2 regions

  x 0.12 · y 0.28 · w 0.17 · h 0.18 (high); x 0.71 · y 0.28 · w 0.17 · h 0.18 (high)
• Front seat support barHorizontal tubular bar forming the front edge of the seat visible just below the back panel, matching the frame color and finish.
  1 region

  x 0.28 · y 0.45 · w 0.44 · h 0.06 (high)

Other

Studio-style product shot on a white background with a soft shadow projecting forward and slight image crop at the bottom; even lighting with minimal reflections.

• Shot compositionCentered rear-facing chair on a plain white background with a soft shadow cast to the lower-left and lower-right, suggesting a single light source above.
• ShadowDiffuse gray shadow of the chair visible on the surface beneath and slightly in front of the chair, with armrest shadow outlines visible.
  1 region

  x 0.08 · y 0.66 · w 0.84 · h 0.30 (high)
• Image cropLower portion of the shadow and floor area is close to the image bottom, but the chair is fully visible; no packaging or props present.

Colors

dark charcoal gray· slatted back panels#4B4A45very dark charcoal· frame and armrests#2C2A25