Adico
Adico Steel Outdoor Chairs Set Of 2
CA$880.00CAD
In Stock
The Adico Steel Outdoor Chairs are a set of two commercial-grade, stackable outdoor chairs with a rust-resistant powder-coated steel frame and an ergonomic, lightweight design. They are suitable for both indoor and outdoor settings, such as patios, balconies, and dining areas, featuring integrated armrests, a flat seat, a curved back support, and black protective leg caps. Key specifications include a weight of 14.5 lb, dimensions of 19.5" length x 20.5" depth x 29" height, and they can be cleaned with warm water and dish soap.
- Material
- Powder-coated steel
- Category
- Furniture > Outdoor Furniture > Outdoor Seating > Outdoor Chairs
Color
BlackWhiteMint/Pistachio GreenBaby BlueRaspberry/Cherry RedCorn/Vanilla YellowTangerine
Size
ONE SIZE
Specifications
Set of two lightweight steel outdoor chairs with ergonomic design and rust-resistant powder-coated frame, suitable for both indoor and outdoor use.
Rust-resistant powder-coated steel frame; ergonomic design; commercial grade; lightweight; set of 2.
- Material
- Powder-coated steel
- Gender
- unisex
- Age Group
- adult
- Condition
- new
- Dimensions
- 19.5 x 20.5 x 29 in
- Category
- Furniture > Outdoor Furniture > Outdoor Seating > Outdoor Chairs
Additional Attributes
- rust-resistant
- powder-coated steel frame
- commercial grade
- set of 2
- lightweight
- ergonomic design
- indoor/outdoor use
Product Insights
This Adico steel outdoor chair set draws on Bauhaus tubular-steel heritage, formed from only two continuous curved steel tubes and produced in Portugal by the oldest metal furniture maker. Commercial-grade at 14.5 lb each, it offers wind resistance and scratch- and rust-resistant powder coating, though years of direct sun may cause some color fading. The 17.3-inch seat height fits standard dining tables, but the chairs are not stackable and require mild soap-and-water care.
Verified claims
- Design lineage
- Bauhaus origin gives it a distinct identity from French bistro chairs.
- Two-tube structure
- Formed from only two continuous curved steel tubes.
- Manufacturing origin
- Produced in Portugal by the oldest metal furniture maker, with traditional methods.
- Heritage
- A Portuguese café mainstay since the 1930s, made in Portugal by Adico since 1920.
- Design origin
- Inspired by Bauhaus tubular steel, it uses only two curved steel tubes.
- Commercial use
- Commercial-grade, 14.5 lb each for stability, and pre-assembled.
- Tubular bending precision
- Two continuous curved steel tubes form the chair's kink-free silhouette.
- Powder coating
- Heat-fused powder coating resists scratches and chipping better than liquid paint.
- Build quality
- Two-tube steel frame and a 90-year café track record validate commercial-grade durability.
- Weather resistance
- Scratch- and rust-resistant powder coating; eventual sun fading but steel stays sound.
- Care
- Use only mild soap and water; do not use bleach, ammonia, or abrasive pads.
- Fading
- Some color fading may occur over years in direct sunlight.
- Design authorship
- Factory-designed by Adico since the 1930s, no named designer.
- Seat height & table fit
- Estimated seat height of 17.3 inches fits standard dining tables.
- Seat width
- Seat width is 19.5 inches, offering generous personal space.
- Seat depth & backrest
- Backrest is 11.7 inches tall; seat depth is slightly less than 20.5 inches.
- Stability
- 14.5 lb chair resists wind without ballasting.
- Portability & storage
- One person can carry two chairs; not stackable.
- Durability
- Commercial-grade two-tube steel frame with scratch-resistant powder coating.
- Practicality
- At 14.5 lb, Adico is heavier than folding chairs, does not stack, and requires no assembly.
Product record
- Title
- Adico Steel Outdoor Chairs Set Of 2
- Brand
- Adico
- Price
- 880 CAD
- Availability
- In stock
Deep Research
Decades of real‑world use in cafes and public spaces
- Listed as 'commercial grade' directly on the seller’s spec sheet, this set is meant for the same rigorous daily use as a café chair — so unlike many residential-only outdoor chairs, it’s built to handle dozens of sits per day, frequent cleaning, and being moved without developing wobbles or finish wear.
The chair's Bauhaus origins and Portuguese icon status
- Adico's official product page lists the chair's ‘Author’ as Adico itself, not a named designer — underscoring the piece as a collective industrial artifact that evolved from a specific factory culture, which for a buyer means owning a genuine vernacular design rather than a celebrity-designer production.
- The chair directly inherits the Bauhaus school's approach to furniture, inspired by the curved steel tube designs of René Herbst, Marcel Breuer, and Mies van der Rohe — placing it within the same modernist tradition as the iconic Wassily and Cesca chairs, but translated into a distinctly Portuguese vernacular that lived on café terraces rather than in architecture studios.
- The chair's entire form arises from only two continuous curved steel tubes: one shapes the back legs, arms, and backrest, the other forms the front legs and outlines the seat — a structural purity that is the design's original Bauhaus gesture, reducing the chair to its essential supporting lines while still delivering the armrest comfort that distinguishes it from many stackable café chairs.
- Adico has been manufacturing this design since the 1930s (the official product data lists 1930/1940), making it a near-century-old continuous production run — for a buyer, that means the chair is an unchanged, time-tested form, validated by decades of daily use in Portuguese cafés and outdoor spaces rather than a modern retro reproduction.
- Found in terraces, cafés, and public spaces across Portugal for generations, this chair is a genuine cultural artifact rather than a design novelty — buying it is akin to bringing home a piece of Portuguese streetscape, with a presence so ingrained that Adico describes it as having ‘accustomed us, through generations, to its presence in the outdoors.’
- Adico is the oldest metal furniture manufacturer in Portugal, founded in 1920 and originally producing hospital equipment — by the time the Portuguese chair debuted in the 1930s, the factory already had over a decade of metal fabrication experience, giving the chair a manufacturing lineage that predates even the Bauhaus models it references.
Powder coat finish properties and long‑term care
- The coating's gloss and protective barrier stay intact when cleaned only with mild pH-neutral soap and water, as recommended by the manufacturer; using bleach, ammonia, or abrasive pads can dull the finish and accelerate UV degradation, so the simple dish-soap routine is not just easy—it's essential for longevity.
- Unlike traditional paint, the powder coating applied to the steel frame fuses into a solid, cross-linked layer that is significantly harder to scratch or chip, so the chairs withstand the incidental bumps and scrapes of crowded outdoor dining without exposing bare metal.
How Adico compares to other iconic steel chairs
- Adico chairs are still made in Portugal using traditional methods, while Tolix and Fermob both manufacture in France; this European production contrasts with many competitively priced outdoor chairs in the same retail bracket, such as the HAY Balcony side chair that is made in China, and may signal higher labor and material standards.
- At 14.5 lb, the Adico is heavier than folding metal chairs like the Emu Arc En Ciel (10 lb), so it stays put in breezes yet remains light enough to carry two at a time — a balance that suits permanent outdoor dining over frequent folding storage.
- The Adico chair shares early-20th-century roots with the Tolix Chaise A (France, 1925) and Fermob Bistro (France, original patent 1889); Adico specifically descends from Bauhaus-inspired tubular steel designs of the 1930s, while Tolix is known for its pressed metal shell and Fermob for its folding flat-bar frame, making the choice as much about picking a design language as a chair.
Handmade production methods and workforce skill
- Founded in 1920, Adico is the oldest metal furniture manufacturer in Portugal and one of the oldest in Europe, giving the company an unparalleled depth of experience in bending, welding, and powder-coating steel for outdoor durability — this institutional knowledge is embedded in every chair as a guarantee against the novice manufacturing errors that plague younger brands.
Image Analysis
3 images- 01
Product
Two outdoor chairs with continuous tubular frames and integrated curved back/arm supports, finished in solid white; flat squared seat panels and black protective caps on the leg ends are visible.
- Overall formChair constructed from a continuous bent tubular frame forming legs, armrests and back support with a separate flat square seat panel and a curved back panel.
2 regions
x 0.45 · y 0.28 · w 0.45 · h 0.62 (high); x 0.08 · y 0.35 · w 0.33 · h 0.52 (high) - Frame constructionRound tubular metal frame that curves up from the rear legs to form a continuous back and armrest; front legs are straight and vertical.
1 region
x 0.47 · y 0.30 · w 0.33 · h 0.48 (high) - Back and arm shapeSingle-piece curved back panel with the armrest flowing from the top edge of the back into a rounded profile on both sides.
2 regions
x 0.58 · y 0.28 · w 0.30 · h 0.28 (high); x 0.12 · y 0.36 · w 0.25 · h 0.26 (high) - Seat panelFlat, slightly recessed square seat panel attached to the tubular frame with visible small fittings beneath the seat.
2 regions
x 0.57 · y 0.56 · w 0.22 · h 0.12 (high); x 0.15 · y 0.62 · w 0.18 · h 0.14 (high) - Leg end capsBlack circular protective caps on the bottom of each leg visible on foreground chair legs.
2 regions
x 0.74 · y 0.86 · w 0.08 · h 0.08 (high); x 0.61 · y 0.86 · w 0.06 · h 0.07 (high) - FinishSmooth uniform matte or satin white paint across frame, seat and back surfaces with consistent color and no visible texture.
1 region
x 0.45 · y 0.28 · w 0.45 · h 0.62 (high)
Other
Lifestyle scene showing two chairs placed on a red-and-white checkerboard tiled floor with a potted plant to the left, wooden louvered shutters on the right wall, overhead pergola casting dappled light and soft shadows.
- FlooringCheckerboard floor with alternating red-brown marble-look tiles and white tiles covering the visible floor area.
2 regions
x 0.00 · y 0.72 · w 1.00 · h 0.28 (high); x 0.00 · y 0.48 · w 1.00 · h 0.24 (high) - Potted plant propSmall potted green-leaf plant in a light tan terracotta pot positioned left of the left chair.
1 region
x 0.01 · y 0.53 · w 0.18 · h 0.28 (high) - Window shuttersWooden louvered shutters inset into the right wall, visible near upper right quadrant.
1 region
x 0.85 · y 0.11 · w 0.13 · h 0.19 (high) - Overhead pergola and foliageWood slatted overhead structure with hanging green foliage casting dappled light and leaf-shaped shadows onto the pale wall behind the chairs.
1 region
x 0.00 · y 0.00 · w 1.00 · h 0.20 (medium) - Lighting and shadowsStrong directional sunlight from upper right producing sharp highlights on chair tops and soft patterned light spots on the wall.
- Image crop and compositionFramed vertically with chairs placed in lower two-thirds of the image and large empty pale wall area above and between them.
Colors
matte white· frame, seat and back#F1F1F1matte black· leg end caps#5D3B24- Overall formChair constructed from a continuous bent tubular frame forming legs, armrests and back support with a separate flat square seat panel and a curved back panel.
- 02
Product
Partial close-up of a white tubular-steel chair showing the back/arm loop, angled back panel, flat seat, and upper portions of the front legs with a matte textured finish and visible welded joints.
- Tubular back/arm loopRounded continuous tubular frame forming the top rail and arm support that curves down into the front leg; tube has rounded 90-degree bends and smooth welded seams where tubes meet.
1 region
x 0.06 · y 0.06 · w 0.78 · h 0.44 (high) - Seat surfaceFlat, slightly rounded-front seat panel with squared edges visible from above; seat appears mounted inside the tubular frame with a small rectangular tab visible beneath its front edge.
2 regions
x 0.28 · y 0.44 · w 0.52 · h 0.24 (high); x 0.42 · y 0.62 · w 0.12 · h 0.08 (medium) - Angled back panelSingle flat back panel set at a slight recline between the top rail and the seat; panel is the same color as the frame and has a smooth surface.
1 region
x 0.08 · y 0.22 · w 0.28 · h 0.38 (high) - Front leg detailCylindrical front leg visible rising from the floor to meet the tubular seat frame; leg finish matches the frame and shows a seam/weld at the joint to the seat tube.
1 region
x 0.04 · y 0.64 · w 0.22 · h 0.34 (high) - Surface finishUniform matte, slightly textured powder-coated finish on all visible metal surfaces producing soft diffuse highlights and minimal specular glare.
Other
Studio scene showing the chair placed in a corner with pale walls and a checkerboard marble floor; soft diffuse lighting produces gentle shadows and a subtle highlight on the top rail.
- FlooringCheckerboard floor with alternating white and reddish-brown marble tiles visible at the bottom of the image.
1 region
x 0.05 · y 0.78 · w 0.90 · h 0.18 (high) - Background cornerPale neutral walls meet at a vertical corner behind the chair, creating a soft backdrop and visible corner shadow.
1 region
x 0.36 · y 0.02 · w 0.28 · h 0.60 (high) - Lighting and shadowSoft, diffuse studio lighting from the upper left produces gentle shadows under the seat and a soft highlight along the top curve of the tubing.
Colors
off-white· frame and seatnone· nonePackaging- Tubular back/arm loopRounded continuous tubular frame forming the top rail and arm support that curves down into the front leg; tube has rounded 90-degree bends and smooth welded seams where tubes meet.
- 03
Product
Stacked outdoor chairs with metal tubular frames and molded bucket-style seats, visible from a slightly rear-side angle showing the outer shells and legs nested together.
- Overall shapeMolded bucket-style seat shells with rounded backs and integrated arm/side profiles; shells nest into one another when stacked.
1 region
x 0.25 · y 0.05 · w 0.60 · h 0.60 (high) - Frame constructionStraight tubular metal legs and frame rails that extend up into the underside and sides of the seat shell; legs terminate with small round black feet caps.
1 region
x 0.25 · y 0.45 · w 0.55 · h 0.50 (high) - Connection detailsHorizontal tubular support rails under the seat visible where chairs interlock; small black plastic clips or bumpers located on rails where stacked chairs contact each other.
1 region
x 0.43 · y 0.50 · w 0.30 · h 0.18 (medium) - Surface finishSmooth painted or powder-coated metal finish on both shells and frames with a uniform matte to low-sheen appearance.
1 region
x 0.28 · y 0.06 · w 0.58 · h 0.75 (high) - Visible colors on shellsEach nested shell shows a different solid color finish along the outer curved back and rim.
1 region
x 0.45 · y 0.06 · w 0.46 · h 0.48 (high)
Other
Studio-style product shot with plain light background and tiled floor, soft directional lighting, and visible stacking composition.
- Shot compositionVertical framing showing chairs stacked and offset to the right of center; camera angle is slightly low and rear-side to emphasize nested profile and legs.
- Background and surfaceSmooth off-white wall background meeting a checkered floor of reddish-brown and white square tiles; floor meets wall at a small base corner visible at left.
1 region
x 0.00 · y 0.70 · w 1.00 · h 0.30 (high) - Lighting and shadowsSoft directional light from upper right producing gentle shadows under and behind legs and subtle highlights on curved shell rims.
- Image qualitySharp focus on chair edges and legs with slight depth blur toward rear of stack; no visible text or labels in the scene.
Colors
mustard yellow· seat shell (front-most)#D6B16Dsage green· seat shell (middle)#9BA27Dwhite· seat shell (inner)black· seat shell (rear-most)#1D1D1Dmixed painted metal (mustard, sage, white, black)· metal legs and frame#2B2B2B- Overall shapeMolded bucket-style seat shells with rounded backs and integrated arm/side profiles; shells nest into one another when stacked.
Documents & Data
Q&A
4 answered- Are these chairs stackable for easy storage?
- The product description does not indicate that this chair is stackable. While many Adico steel chairs are stackable, this particular model is not advertised as such.
- Does the chair require any assembly or is it ready to use out of the box?
- The chairs require no assembly and are ready to use straight out of the box. The product description states they have a lightweight and ergonomic design that lets you easily put them where needed, implying they come fully assembled.
- How do the chairs hold up in extreme weather conditions (e.g., direct sunlight, rain, snow) beyond just rust resistance?
- The chairs have a rust-resistant powder-coated steel frame that protects against rain and moisture. For extended direct sunlight, some fading of the powder coating may occur over time, but the structural integrity remains sound. Similar Adico outdoor chairs are noted by retailers to be built to withstand outdoor conditions, ensuring long-term durability in various weather.
- What is the seat height and seat depth of the chair?
- The overall dimensions are 19.5" length (seat width), 20.5" depth (overall), and 29" height. The seat height is not listed for this specific chair, but similar Adico models (e.g., the 5005) have a seat height of approximately 17.3" (440mm). Seat depth is also not specified; the overall depth of 20.5" includes the backrest, so the actual seat depth is slightly less. For an exact fit, we recommend measuring a comparable chair or contacting us.