Steel Incense Holder

A geometrical incense holder made from powder coated steel, designed to burn incense sticks and spark conversation.

Powder coated steel, made in Ontario, geometrical design, holds incense sticks.

Material

Powder coated steel

Style

industrial, minimalist, modern

Occasion

everyday, gift

Gender

unisex

Age Group

adult

Condition

new

Dimensions

4.5x3.75x3 in

Category

Home & Garden > Decor > Home Fragrance Accessories > Incense Holders

01

Product

Glossy green steel U-shaped incense holder with a vertical end plate joined by a visible hex bolt; a single lit black incense stick is inserted through a small hole near the vertical end.

• Main body shapeU-shaped channel formed by two parallel horizontal flat arms with rounded front ends, opening upward to hold ash; channel runs roughly left to right and is attached to a vertical end plate at the right.
  1 region

  x 0.07 · y 0.57 · w 0.72 · h 0.30 (high)
• Vertical end plateShort vertical rectangular plate at the right end, rounded top corners, welded or bolted to the horizontal channel; plate sits upright and is the insertion point for the incense stick.
  1 region

  x 0.70 · y 0.45 · w 0.23 · h 0.43 (high)
• Fastener detailLarge exposed hexagonal bolt with visible nut head on the outer face of the vertical plate, shiny metallic finish and reflective faces.
  1 region

  x 0.86 · y 0.66 · w 0.10 · h 0.17 (high)
• Incense stick insertionA single thin black incense stick inserted horizontally through a small round hole in the vertical plate, extending leftward over the channel and emitting smoke from its lit tip.
  1 region

  x 0.52 · y 0.36 · w 0.46 · h 0.18 (high)
• Finish and surfaceHigh-gloss painted finish on the steel surfaces showing specular highlights and smooth reflections, with slight surface texture visible near edges where light reflects.
• Ash-catching geometryInner floor of the U-channel is flat and continuous from front to the vertical plate, forming a shallow trough to receive ash from the burning stick.
  1 region

  x 0.20 · y 0.63 · w 0.55 · h 0.18 (high)
• Incense stick color and tipThin cylindrical stick is matte black; the left tip is lit and shows a small glowing ember and wisps of smoke rising upward.
  1 region

  x 0.45 · y 0.28 · w 0.20 · h 0.12 (high)

Other

Studio shot on a reflective dark metallic surface with vertical dark gradient backdrop; soft directional lighting creates strong reflections of the product and visible rising smoke from the incense.

• Background and surfaceDark metallic vertical backdrop meeting a reflective horizontal surface at a corner; backdrop shows subtle vertical seam and horizontal gradient from dark to lighter tones.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.70 (medium)
• ReflectionClear reflection of the green product and bolt visible on the glossy surface beneath, including mirrored rounded front of the U-channel and vertical plate reflection.
  1 region

  x 0.07 · y 0.77 · w 0.78 · h 0.20 (high)
• Smoke plumeThin curling plume of pale gray smoke rises from the lit incense tip and extends upward into the upper left quadrant of the frame, with visible wispy tendrils.
  1 region

  x 0.30 · y 0.02 · w 0.40 · h 0.40 (high)
• LightingSoft directional studio lighting from above-left producing highlights along the top edges of the product and a bright specular strip on the horizontal surface.
• Image crop and framingProduct is centered horizontally and placed in the lower half of the frame; top area contains negative space with smoke rising into it.

Colors

gloss green· horizontal U-channel and vertical plate#028954metallic silver· bolt and nutmatte black· incense stick

02

Product

Close-up of a green painted metal block with two vertical square posts, a rectangular cutout containing an angled tab with a centered circular hole, and a hex bolt with washer visible on the left side.

• Main housing shapeRectangular rounded-corner metal block with glossy painted finish and a visible seam at the base where it meets the surface.
  1 region

  x 0.15 · y 0.30 · w 0.70 · h 0.65 (high)
• Vertical postsTwo vertical square-section posts rising from the top of the block, painted the same green and showing flat faces and sharp edges.
  1 region

  x 0.36 · y 0.00 · w 0.28 · h 0.45 (high)
• Cutout and internal tabRectangular cutout in the front face revealing an angled rectangular tab with a circular hole through its center; the tab projects forward slightly and is painted green.
  1 region

  x 0.45 · y 0.42 · w 0.35 · h 0.25 (high)
• Left-side fastenerHex-head bolt with washer installed through the left face; bolt head and washer are metallic and reflective.
  1 region

  x 0.03 · y 0.52 · w 0.20 · h 0.24 (high)
• Surface finish detailsHigh-gloss enamel-like paint with small specular highlights and subtle unevenness in paint texture visible in close-up.

Other

Studio-style close-up with dark neutral background, strong directional lighting creating specular highlights and a clear reflection of the product on the glossy surface below.

• Shot compositionTight detail crop framing the lower portion of the vertical posts and the top two-thirds of the block; product centered slightly right of center.
• Background and surfaceDark out-of-focus background with a reflective flat surface beneath the product producing a mirror-like green reflection.
  1 region

  x 0.18 · y 0.85 · w 0.64 · h 0.15 (medium)
• Lighting and shadowsDirectional studio lighting from upper-left producing bright highlights on edges and soft shadows on the right side of components.
• Image cropTop of the vertical posts extends beyond the top edge of the frame and is partially cropped.
  1 region

  x 0.36 · y 0.00 · w 0.28 · h 0.20 (high)

Colors

vivid glossy green· main painted steel#01A562metallic silver· hex bolt and washer

03

Product

Multiple metal hardware pieces arranged on and around stacked printed cardboard boxes: two long angled lever pieces in orange and green, a round silver holder with four short feet, a white enamel cup with black trim and a rectangular white metal plate with two bolts and SE text. Several pieces show exposed hex bolts and stamped SE logo.

• Orange leverLong rectangular metal lever piece with an angled lift profile finished in matte orange paint, secured at one rounded pivot with a visible hex bolt and nut; open slot at the pivot end.
  1 region

  x 0.06 · y 0.53 · w 0.46 · h 0.22 (high)
• Green leverLong rectangular metal lever piece finished in matte green paint, similar shape to the orange lever, showing a visible hex bolt at its pivot and an inset rectangular cutout near one end.
  2 regions

  x 0.04 · y 0.80 · w 0.38 · h 0.16 (high); x 0.66 · y 0.54 · w 0.11 · h 0.17 (medium)
• Round silver holderLow round metal component with a shallow bowl center rimmed by a thin black gasket and four short outward feet or tabs around its base, raw metallic silver finish.
  1 region

  x 0.39 · y 0.80 · w 0.20 · h 0.12 (high)
• White enamel cupCylindrical white cup with black trim rings at top and bottom and a narrow squared handle, stacked on a small cardboard box.
  1 region

  x 0.48 · y 0.20 · w 0.16 · h 0.16 (high)
• White metal plate with boltsTall narrow white rectangular metal plate standing vertically with two exposed hex bolts and the letters SE printed vertically in black.
  1 region

  x 0.62 · y 0.29 · w 0.06 · h 0.22 (high)
• Stacked cardboard boxesMultiple kraft cardboard shipping-style boxes stacked and arranged as risers; boxes bear printed line-art illustrations of the product and a circular SE logo on at least one face.
  1 region

  x 0.30 · y 0.34 · w 0.50 · h 0.48 (high)
• Exposed hex fastenersSeveral parts show polished hex-head bolts and nuts mounted through painted steel, visible on green, orange, white and silver components.
  2 regions

  x 0.02 · y 0.76 · w 0.20 · h 0.24 (high); x 0.74 · y 0.64 · w 0.24 · h 0.32 (high)

Packaging

Kraft cardboard boxes printed with black line-art product illustrations and bold SE logo; smaller printed labels with product text are visible on some box faces.

• SE circular logo on boxCircular printed emblem containing the letters SE on the face of a small square kraft box.
  1 region

  x 0.42 · y 0.36 · w 0.18 · h 0.16 (high)
• Box printed illustrationBlack line drawing of a rectangular tool printed on the long side of a cardboard box, matching the shape of the assembled product components shown.
  1 region

  x 0.18 · y 0.68 · w 0.54 · h 0.18 (high)
• Small product label text“Printed label on a small box panel reading BOTTLE OPENER STANDARD EQUIPMENT Tools for Non-Standard Living”
  1 region

  x 0.39 · y 0.59 · w 0.22 · h 0.06 (high)
• Small SE logotype on boxTwo-letter SE logotype printed on multiple box faces in bold black.
  2 regions

  x 0.38 · y 0.58 · w 0.07 · h 0.04 (high); x 0.78 · y 0.42 · w 0.10 · h 0.18 (medium)

Other

Studio lifestyle composition with reflective metallic surface and dark gradient backdrop; soft directional lighting from upper left produces reflections and subtle shadows under objects.

• Shot compositionPortrait-oriented studio shot showing arranged product parts and stacked boxes occupying the lower two-thirds of the frame with empty dark gradient background above.
• Reflective surfaceMirror-like horizontal surface reflects the objects and printed box art, producing clear inverted reflections visible beneath the objects.
  1 region

  x 0.10 · y 0.70 · w 0.80 · h 0.28 (high)
• BackgroundSmooth dark backdrop with horizontal subtle banding and gradient from deep navy at top to warmer tones lower down.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.38 (high)
• Lighting and shadowSoft directional light from upper left producing gentle highlights on painted surfaces and soft cast shadows to the right and below objects.

Colors

matte orange· orange lever#EA5402matte green· green lever#028A53gloss white· white cup and white plate#EDECF2raw silver· silver metal#BCBCC5kraft brown· cardboard boxesPackaging#BA8A5D