Forest Green Checkers Rectangular Jewellery Box

Rectangular jewellery box with forest green checkerboard pattern, cotton exterior, faux-suede lining, and compartmentalized interior.

Compartmentalized interior with flap panel, metallic zip closure.

Color

Forest Green · green

Material

100% cotton exterior fabric, soft faux-suede lining

Secondary

suede

Style

classic, travel-friendly

Occasion

gift, everyday

Gender

female

Condition

new

Dimensions

9.5x6.75x2.25 in

Category

Home & Garden > Decor

01

Product

A rectangular zippered jewelry case shown open, revealing a green fabric interior with necklace hooks, an elastic pouch, and a flat padded panel with ring/earring storage; exterior shows a green-and-white checker pattern and a gold zipper.

• Overall shapeRectangular clamshell case with rounded corners shown open at about 90 degrees; base and lid are similar thickness and connected by a zipper running around three sides.
  1 region

  x 0.05 · y 0.20 · w 0.90 · h 0.65 (high)
• Exterior patternCheckerboard pattern of alternating dark green and white squares covering the outer shell visible on the base rim and lid edge.
  2 regions

  x 0.05 · y 0.62 · w 0.90 · h 0.30 (high); x 0.05 · y 0.20 · w 0.18 · h 0.38 (high)
• Zipper hardwareMetallic gold zipper track visible along the lid and base perimeter, with the zipper pull not visible in this view.
  1 region

  x 0.07 · y 0.60 · w 0.86 · h 0.14 (high)
• Interior lining materialUniform deep green soft fabric lining covering lid interior, base pad, and elastic pocket; appears suede-like or velvety in texture.
  1 region

  x 0.18 · y 0.18 · w 0.64 · h 0.58 (high)
• Necklace hooks and storageRow of small vertical tabs/hooks along the upper interior lid used to hang necklaces; several chains are hanging from them.
  1 region

  x 0.25 · y 0.19 · w 0.50 · h 0.20 (high)
• Elastic pocketGathered elastic-top pocket attached to the lower portion of the lid interior spanning nearly the full internal width.
  1 region

  x 0.18 · y 0.35 · w 0.64 · h 0.18 (high)
• Padded insert with earring/ring slotsFlat padded panel in the base with small perforated/indented holes and two raised multi-ridge metal ring/earring holders attached on the right side.
  1 region

  x 0.20 · y 0.48 · w 0.63 · h 0.28 (high)
• Visible jewelry piecesThree separate gold-tone jewelry items placed on the base pad: a pair of flat teardrop-shaped pieces near the front-left and two ribbed semi-circular pieces near the right mid-area; also several thin gold chains hanging from lid hooks.
  3 regions

  x 0.28 · y 0.66 · w 0.22 · h 0.10 (high); x 0.58 · y 0.60 · w 0.20 · h 0.14 (high); x 0.38 · y 0.24 · w 0.30 · h 0.18 (high)
• Interior embossingFaint embossed text or logo centered on the base pad, visually subtle and not clearly legible at this resolution.Partial
  1 region

  x 0.44 · y 0.60 · w 0.12 · h 0.06 (medium)

Other

Studio shot of the open jewelry case on a flat neutral surface with a paneled vertical backdrop; soft directional lighting from the left creates gentle shadows.

• Shot compositionProduct is staged three-quarters view slightly turned to the right, occupying the lower-center of the frame with lid open behind the base.
• BackgroundVertical paneled wall in a muted taupe color behind the product.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.45 (high)
• Surface and shadowFlat pale surface under the product with a soft shadow cast to the right and slightly rearward.
  1 region

  x 0.00 · y 0.45 · w 1.00 · h 0.55 (high)
• Image qualitySharp product focus with even studio lighting and low visible noise; no motion blur.

Colors

forest green· interior lining and padded insert#5D8A64dark green check and white· exterior shell checker squares#2C332Bmetallic gold· zipper hardware and visible jewelry

02

Product

Rectangular jewellery box interior shown open with forest-green soft fabric lining, multiple divided compartments including ring rolls, an elastic pocket on the lid, and a checker-pattern exterior visible on the case edge; several gold-tone jewelry pieces rest inside.

• Interior lining materialSoft suede-like or velour fabric lining in a saturated forest green covering all internal surfaces and compartment dividers.
  1 region

  x 0.08 · y 0.08 · w 0.84 · h 0.64 (high)
• Compartment layoutGrid of small square/rectangular compartments on the right and center, separated by padded dividers; one larger open compartment holding a cuff-style bracelet.
  1 region

  x 0.38 · y 0.36 · w 0.54 · h 0.42 (high)
• Ring rollsHorizontal padded ring-roll section with multiple parallel ridges for storing rings, located along the lower-left interior.
  1 region

  x 0.06 · y 0.62 · w 0.48 · h 0.30 (high)
• Elastic pocket in lidGathered elastic-top pocket attached to the inside of the lid, made from the same green fabric, running horizontally near the top of the open lid.
  1 region

  x 0.06 · y 0.06 · w 0.68 · h 0.20 (high)
• Removable flap/coverA fabric-covered flap or shelf hinged from the lid folds over the compartments; it is covered in the same green fabric and rests partly open in this image.
  1 region

  x 0.18 · y 0.20 · w 0.66 · h 0.20 (high)
• Checker exterior trimExterior side of the box visible along the bottom edge shows a small square checkerboard pattern in green and white wrapping the case edge.
  1 region

  x 0.02 · y 0.82 · w 0.96 · h 0.16 (high)
• Metal zipperGold-tone metal zipper runs around the case opening; teeth and zipper tape visible along the case edge.
  1 region

  x 0.04 · y 0.78 · w 0.92 · h 0.12 (high)
• Jewelry pieces presentSeveral gold-tone jewelry items placed inside: a cuff-style open bangle in the lower-right compartment, small dome-shaped stud or bead in a center compartment, and multiple gold rings or clips on the flap and in ring rolls.
  3 regions

  x 0.62 · y 0.60 · w 0.30 · h 0.28 (high); x 0.28 · y 0.46 · w 0.18 · h 0.14 (medium); x 0.12 · y 0.70 · w 0.26 · h 0.18 (medium)
• Interior checker accentSmall section of the checkerboard pattern appears on an interior hinge area or trim near the lid, matching the exterior pattern.
  1 region

  x 0.60 · y 0.22 · w 0.06 · h 0.08 (medium)

Other

Close-up angled product shot composed with the box open on a flat neutral surface; warm studio lighting from upper left creates soft shadows and subtle highlights on metal jewelry and fabric texture.

• Shot compositionAngled close-up from above and front-right focusing on the open interior; lower-left corner of the case is nearest the camera.
• Lighting and shadowDirectional warm light from upper-left producing soft highlights on the gold hardware and mild shadows inside compartments.
• Background and surfaceNeutral pale surface visible beneath the case along the right and bottom edges, out of focus compared with the product.
  1 region

  x 0.60 · y 0.84 · w 0.36 · h 0.14 (high)
• Image qualitySharp detail on fabric texture and metal pieces; no legible printed text visible in the frame.

Colors

forest green· interior lining and compartment dividers#345B3Cforest green (checker) and white· exterior checker pattern#392C23gold metallic· metal zipper teeth and jewelry pieces#9C8B7B

03

Product

Low rectangular fabric-covered jewellery box with a two-tone small-check pattern, a stitched rectangular fabric label on the front face, and a metal zipper running around the sides and front. The box is shown lying flat with the top facing slightly toward the viewer.

• Overall shapeRectangular shallow box with rounded corners and a low profile; top and bottom panels are parallel and the sides are vertical.
  1 region

  x 0.04 · y 0.62 · w 0.92 · h 0.27 (high)
• Surface coveringAll visible outer surfaces are covered in a small square checker fabric pattern composed of alternating dark green and off-white squares.
  2 regions

  x 0.06 · y 0.62 · w 0.88 · h 0.20 (high); x 0.06 · y 0.76 · w 0.88 · h 0.08 (high)
• Front fabric labelRectangular stitched fabric label sewn onto the front face, lighter beige in tone with printed dark text.
  1 region

  x 0.45 · y 0.73 · w 0.26 · h 0.08 (high)
• ZipperMetal zipper runs around the front and sides at the seam between top and bottom halves; zipper teeth are metallic and the zipper pull is attached on the right side.
  2 regions

  x 0.06 · y 0.76 · w 0.88 · h 0.06 (high); x 0.90 · y 0.77 · w 0.06 · h 0.08 (high)
• Zipper pull tabShort fabric loop pull tab covered in the same checker fabric attached to the metal zipper pull on the right front corner.
  1 region

  x 0.90 · y 0.78 · w 0.08 · h 0.08 (high)
• Label text“SHRIMPS x DAISY”
  1 region

  x 0.48 · y 0.74 · w 0.20 · h 0.06 (medium)

Other

Product photographed on a flat neutral-toned surface with a vertical paneled backdrop; soft directional lighting from above-left creates a faint shadow beneath the box toward the lower right.

• Background panelsVertical paneled wall in a muted brown tone behind the product occupying the upper portion of the image.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 0.62 (high)
• Supporting surfaceSmooth flat tabletop in a pale neutral tone on which the box rests.
  1 region

  x 0.00 · y 0.62 · w 1.00 · h 0.38 (high)
• Shadow and lightingSoft shadow visible under and to the right of the box consistent with a diffuse light source positioned above-left.
• Shot compositionThree-quarter overhead frontal view showing top and front faces; product centered horizontally and cropped with full box visible.

Colors

forest green· checker squares (dark)off-white· checker squares (light)light beige· front label#DBD1C6warm gold· zipper teeth and slider