Beverage Holder For The Shower

A practical and fun shower accessory to hold a beverage, made from easy-care antibacterial silicone with drainage holes.

Compartment with drainage holes to release water; Sticks well on glossy surfaces; Easy-care antibacterial silicone.

Material

antibacterial silicone

Style

playful, modern

Gender

unisex

Age Group

adult

Condition

new

Dimensions

4x2.5x6 in

Category

Home & Garden > Bathroom Accessories > Bath Caddies

01

Product

A wall-mounted silicone beverage pocket in dark gray attached to an octagonal suction backing plate; a beverage can is held inside the pocket. The front of the pocket has an embossed brand wordmark.

• Pocket shape and mountingSoft-sided pocket with a rounded-bottom cup shape formed from a single molded piece, attached to a flat octagonal backing plate that sits flush against the wall.
  1 region

  x 0.17 · y 0.12 · w 0.65 · h 0.76 (high)
• Material and finishMatte, flexible silicone or rubbery material with visible water droplets and streaks on its surface.
  1 region

  x 0.25 · y 0.28 · w 0.50 · h 0.50 (high)
• Front embossing“Embossed wordmark centered on the front lower area of the pocket reading 'TOOLETRIES™'.”
  1 region

  x 0.34 · y 0.62 · w 0.33 · h 0.18 (high)
• Held item visibleA standard beverage can seated inside the pocket with its top and upper side visible above the pocket rim.
  1 region

  x 0.32 · y 0.14 · w 0.36 · h 0.28 (high)
• Can label fragment“Large uppercase letters visible on the can: 'KOM' (legible) and additional partial characters visible but cropped.”Partial
  1 region

  x 0.36 · y 0.24 · w 0.28 · h 0.18 (high)

Other

Close-up front-facing product shot on a light-colored wet wall with directional soft lighting from above-left producing subtle shadow on the lower right; visible water droplets on wall and product; image is vertically oriented and tightly cropped around the product.

• Background and surfaceSmooth, light-colored wall with scattered water droplets and small drips.
  1 region

  x 0.00 · y 0.00 · w 1.00 · h 1.00 (high)
• Lighting and shadowSoft diffuse lighting from above-left creating a soft shadow to the lower-right of the backing plate and a mild highlight on the can rim.
• Water droplets and dripVisible water beads and a drip forming at the bottom edge of the pocket.
  1 region

  x 0.41 · y 0.70 · w 0.19 · h 0.12 (high)
• Shot compositionCentered composition with the product filling most of the vertical frame; slight crop at the very bottom edge of the backing plate.

Colors

charcoal gray· pocket (front cup)#2F3032dark charcoal· backing plate#262529

02

Product

Close-up view of the underside of a dark matte plastic shower beverage holder showing its rounded base with multiple small drainage holes and an integrated shallow drip-tray; water is actively draining through the holes.

• Underside geometryRounded, slightly tapered underside of a cup-shaped container with a smooth curved base visible near the top-center of the image.
  1 region

  x 0.08 · y 0.02 · w 0.84 · h 0.48 (high)
• Embossed brand text“Partial raised/embossed text 'TOOLETRIES' visible along the upper-left curve of the holder.”
  1 region

  x 0.05 · y 0.02 · w 0.48 · h 0.18 (medium)
• Drain holes and water streamsMultiple small circular drainage holes along the lower edge of the holder with distinct streams and droplets of water pouring downward through them.
  1 region

  x 0.28 · y 0.35 · w 0.44 · h 0.28 (high)
• Integrated shallow trayOctagonal-ish shallow tray attached beneath the holder with an inner rim that catches and channels dripping water; tray sits flush against a vertical wall surface.
  1 region

  x 0.12 · y 0.52 · w 0.76 · h 0.36 (high)
• Water on tray surfaceBeads and small pools of water visible on the tray surface and along its front edge, including a hanging droplet on the tray lip.
  1 region

  x 0.18 · y 0.60 · w 0.62 · h 0.28 (high)

Other

Close, low-angle product shot focusing on the underside and dripping action; plain light-colored wall background; soft diffuse lighting with visible highlights on water and matte finish on the product.

• Shot compositionClose-up low-angle framing from slightly below the product, centered on the drainage area so the bottom and tray fill most of the frame.
• BackgroundSmooth, light-colored vertical wall behind and below the tray, largely uniform and unobtrusive.
  1 region

  x 0.02 · y 0.68 · w 0.96 · h 0.30 (high)
• Lighting and reflectionsDiffuse soft lighting produces subtle highlights on the matte plastic and pronounced specular highlights on the flowing water streams and droplets.
• MotionVisible motion in water streams and falling droplets captured with slight motion blur and distinct suspended droplets at the moment of capture.
  1 region

  x 0.30 · y 0.40 · w 0.40 · h 0.44 (high)

Colors

charcoal gray· main body#343333charcoal gray· drip tray#33312Etransparent/clear· dripping water#242322

03

Product

Wall-mounted cup-shaped shower beverage holder made from a single-piece dark matte flexible material with an integrated octagonal backplate and an open top; the front face has an embossed brand wordmark.

• Overall formSingle molded cup or pouch with an open top mounted onto a flat octagonal backplate; front pouch has a curved upper lip and a rounded bottom corner that transitions into the backplate.
  1 region

  x 0.12 · y 0.12 · w 0.76 · h 0.76 (high)
• Material and finishUniform matte, flexible-looking material with a soft, non-reflective finish consistent across the pouch and backplate.
  1 region

  x 0.14 · y 0.14 · w 0.72 · h 0.70 (high)
• Top opening shapeAsymmetrical open top with the front rim lower and the rear rim higher, creating a slanted opening towards the viewer's left.
  1 region

  x 0.20 · y 0.18 · w 0.62 · h 0.26 (high)
• Backplate geometryFlat rectangular backplate with chamfered/octagonal corners and a narrow raised edge detail around its perimeter.
  1 region

  x 0.18 · y 0.10 · w 0.64 · h 0.80 (high)
• Embossed text on front“TOOLETRIES™”
  1 region

  x 0.20 · y 0.52 · w 0.44 · h 0.16 (high)
• Seam and joint linesSubtle molded seam lines visible where the pouch meets the backplate and along the inner corner of the pouch.
  1 region

  x 0.56 · y 0.26 · w 0.28 · h 0.56 (medium)
• Visible interiorInterior of the pouch is visible from the top left opening and appears slightly darker due to shadowing.
  1 region

  x 0.18 · y 0.22 · w 0.28 · h 0.28 (high)

Other

Studio-style shot with a plain light background, soft directional lighting from upper left producing a shadow on the lower right; product centered and cropped so the full backplate and pouch are visible.

• BackgroundSmooth, light neutral background with no visible texture or props.
• Lighting and shadowSoft directional lighting from above-left casting a soft shadow of the product to the lower right and subtle highlights along upper left edges of the backplate.
• Shot compositionThree-quarter frontal view slightly angled so the pouch interior and right side seam are visible; product occupies the central vertical band of the image.

Colors

dark charcoal· main body and backplate#343434